40 CFR Part 410 - PART 410—TEXTILE MILLS POINT SOURCE CATEGORY
-
General Provisions (§§ 410.00 - 410.02)
- § 410.00 Applicability.
- § 410.01 General definitions.
- § 410.02 Monitoring requirements. [Reserved]
- Subpart A—Wool Scouring Subcategory (§§ 410.10 - 410.17)
- Subpart B—Wool Finishing Subcategory (§§ 410.20 - 410.27)
- Subpart C—Low Water Use Processing Subcategory (§§ 410.30 - 410.37)
- Subpart D—Woven Fabric Finishing Subcategory (§§ 410.40 - 410.47)
- Subpart E—Knit Fabric Finishing Subcategory (§§ 410.50 - 410.57)
- Subpart F—Carpet Finishing Subcategory (§§ 410.60 - 410.67)
- Subpart G—Stock and Yarn Finishing Subcategory (§§ 410.70 - 410.77)
- Subpart H—Nonwoven Manufacturing Subcategory (§§ 410.80 - 410.87)
- Subpart I—Felted Fabric Processing Subcategory (§§ 410.90 - 410.97)
Authority:
Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 186 et seq., Pub. L. 92–500; 91 Stat. 1567, Pub. L. 95–217.
Source:
47 FR 38819, Sept. 2, 1982, unless otherwise noted.
The following state regulations pages link to this page.
Colorado
Iowa
Louisiana
Maine
Nebraska
Tennessee
Virginia