40 CFR Part 53, Subpart F, Figure F-1 to Subpart F of Part 53 - Designation Testing Checklist
Figure F-1 to Subpart F of Part 53—Designation Testing Checklist
DESIGNATION TESTING CHECKLIST FOR CLASS II
|Compliance Status:Y = YesN = NoNA = Not applicable/Not available||Verification Comments (Includes documentation of who, what, where, when, why) (Doc. #, Rev. #, Rev. Date)|
|Verification||Verified by Direct Observation of Process or of Documented Evidence: Performance, Design or Application Spec. Corresponding to Sections of 40 CFR Part 53, Subparts E and F|
|Subpart E: Performance Specification Tests|
|Evaluation completed according to Subpart E § 53.50 to § 53.56|
|Subpart E: Class I Sequential Tests|
|Class II samplers that are also Class I (sequentialized) have passed the tests in § 53.57|
|Subpart F: Performance Spec/Test|
|Evaluation of Physical Characteristics of Clean Sampler - One of these tests must be performed:§ 53.62 - Full Wind Tunnel§ 53.63 - Inlet Aspiration§ 53.64 - Static Fractionator|
|Evaluation of Physical Characteristics of Loaded Sampler§ 53.65 Loading TestOne of the following tests must be performed for evaluation after loading: § 53.62, § 53.63, § 53.64|
|Evaluation of the Volatile Characteristics of the Class II Sampler § 53.66|
Title 40 published on 2015-07-01.
No entries appear in the Federal Register after this date, for 40 CFR Part 53.