40 CFR Appendix Table 5 to Subpart DDDDD of Part 63 - Table 5 to Subpart DDDDD of Part 63—Performance Testing Requirements
Table 5 to Subpart DDDDD of Part 63—Performance Testing Requirements
As stated in § 63.7520, you must comply with the following requirements for performance testing for existing, new or reconstructed affected sources:
| To conduct a performance test for the following pollutant . . . | You must. . . | Using, as appropriate . . . |
|---|---|---|
| 1. Filterable PM | a. Select sampling ports location and the number of traverse points | Method 1 at 40 CFR part 60, appendix A–1 of this chapter. |
| b. Determine velocity and volumetric flow-rate of the stack gas | Method 2, 2F, or 2G at 40 CFR part 60, appendix A–1 or A–2 to part 60 of this chapter. | |
| c. Determine oxygen or carbon dioxide concentration of the stack gas | Method 3A or 3B at 40 CFR part 60, appendix A–2 to part 60 of this chapter, or ANSI/ASME PTC 19.10–1981. a | |
| d. Measure the moisture content of the stack gas | Method 4 at 40 CFR part 60, appendix A–3 of this chapter. | |
| e. Measure the PM emission concentration | Method 5 or 17 (positive pressure fabric filters must use Method 5D) at 40 CFR part 60, appendix A–3 or A–6 of this chapter. | |
| f. Convert emissions concentration to lb per MMBtu emission rates | Method 19 F-factor methodology at 40 CFR part 60, appendix A–7 of this chapter. | |
| 2. TSM | a. Select sampling ports location and the number of traverse points | Method 1 at 40 CFR part 60, appendix A–1 of this chapter. |
| b. Determine velocity and volumetric flow-rate of the stack gas | Method 2, 2F, or 2G at 40 CFR part 60, appendix A–1 or A–2 of this chapter. | |
| c. Determine oxygen or carbon dioxide concentration of the stack gas | Method 3A or 3B at 40 CFR part 60, appendix A–1 of this chapter, or ANSI/ASME PTC 19.10–1981. a | |
| d. Measure the moisture content of the stack gas | Method 4 at 40 CFR part 60, appendix A–3 of this chapter. | |
| e. Measure the TSM emission concentration | Method 29 at 40 CFR part 60, appendix A–8 of this chapter | |
| f. Convert emissions concentration to lb per MMBtu emission rates | Method 19 F-factor methodology at 40 CFR part 60, appendix A–7 of this chapter. | |
| 3. Hydrogen chloride | a. Select sampling ports location and the number of traverse points | Method 1 at 40 CFR part 60, appendix A–1 of this chapter. |
| b. Determine velocity and volumetric flow-rate of the stack gas | Method 2, 2F, or 2G at 40 CFR part 60, appendix A–2 of this chapter. | |
| c. Determine oxygen or carbon dioxide concentration of the stack gas | Method 3A or 3B at 40 CFR part 60, appendix A–2 of this chapter, or ANSI/ASME PTC 19.10–1981. a | |
| d. Measure the moisture content of the stack gas | Method 4 at 40 CFR part 60, appendix A–3 of this chapter. | |
| e. Measure the hydrogen chloride emission concentration | Method 26 or 26A (M26 or M26A) at 40 CFR part 60, appendix A–8 of this chapter. | |
| f. Convert emissions concentration to lb per MMBtu emission rates | Method 19 F-factor methodology at 40 CFR part 60, appendix A–7 of this chapter. | |
| 4. Mercury | a. Select sampling ports location and the number of traverse points | Method 1 at 40 CFR part 60, appendix A–1 of this chapter. |
| b. Determine velocity and volumetric flow-rate of the stack gas | Method 2, 2F, or 2G at 40 CFR part 60, appendix A–1 or A–2 of this chapter. | |
| c. Determine oxygen or carbon dioxide concentration of the stack gas | Method 3A or 3B at 40 CFR part 60, appendix A–1 of this chapter, or ANSI/ASME PTC 19.10–1981. a | |
| d. Measure the moisture content of the stack gas | Method 4 at 40 CFR part 60, appendix A–3 of this chapter. | |
| e. Measure the mercury emission concentration | Method 29, 30A, or 30B (M29, M30A, or M30B) at 40 CFR part 60, appendix A–8 of this chapter or Method 101A at 40 CFR part 61, appendix B of this chapter, or ASTM Method D6784. a | |
| f. Convert emissions concentration to lb per MMBtu emission rates | Method 19 F-factor methodology at 40 CFR part 60, appendix A–7 of this chapter. | |
| 5. CO | a. Select the sampling ports location and the number of traverse points | Method 1 at 40 CFR part 60, appendix A–1 of this chapter. |
| b. Determine oxygen concentration of the stack gas | Method 3A or 3B at 40 CFR part 60, appendix A–3 of this chapter, or ASTM D6522–00 (Reapproved 2005), or ANSI/ASME PTC 19.10–1981. a | |
| c. Measure the moisture content of the stack gas | Method 4 at 40 CFR part 60, appendix A–3 of this chapter. | |
| d. Measure the CO emission concentration | Method 10 at 40 CFR part 60, appendix A–4 of this chapter. Use a measurement span value of 2 times the concentration of the applicable emission limit. |
a Incorporated by reference, see § 63.14.