40 CFR Part 63, Subpart KKKK, Table 1 to Subpart KKKK of Part 63 - Emission Limits for New or Reconstructed Affected Sources

Status message

There are 13 Updates appearing in the Federal Register for 40 CFR Part 63. View below or at eCFR (GPOAccess)
prev | next
View PDF at GPO Pt. 63, Subpt. KKKK, Table 1
Table 1 to Subpart KKKK of Part 63—Emission Limits for New or Reconstructed Affected Sources
You must comply with the emission limits that apply to your affected source in the following table as required by § 63.3490(a) through (c).
If you apply surface coatings to metal cans or metal can parts in this subcategory . . . Then for all coatings of this type . . . You must meet the following organic HAP emission limit in kg HAP/liter solids (lbs HAP/gal solids): a,b
a If you apply surface coatings of more than one type within any one subcategory you may calculate an OSEL according to § 63.3531(i).
b Rounding differences in specific emission limits are attributable to unit conversions.
1. One and two-piece draw and iron can body coating a. Two-piece beverage cans—all coatingsb. Two-piece food cans—all coatings c. One-piece aerosol cans—all coatings 0.04 (0.31).0.06 (0.50). 0.08 (0.65).
2. Sheetcoating Sheetcoating 0.02 (0.17).
3. Three-piece can assembly a. Inside spray 0.12 (1.03).
b. Aseptic side seam stripes on food cans 1.48 (12.37).
c. Nonaseptic side seam stripes on food cans 0.72 (5.96).
d. Side seam stripes on general line nonfood cans 1.18 (9.84).
e. Side seam stripes on aerosol cans 1.46 (12.14).
4. End coating a. Aseptic end seal compounds 0.06 (0.54).
b. Nonaseptic end seal compounds 0.00 (0.00).
c. Repair spray coatings 0.64 (5.34).

Title 40 published on 2014-07-01.

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2015-02-27; vol. 80 # 39 - Friday, February 27, 2015
    1. 80 FR 10596 - Delegation of Authority to the States of Iowa; Kansas; Missouri; Nebraska; Lincoln-Lancaster County, NE; and City of Omaha, NE., for New Source Performance Standards (NSPS), National Emission Standards for Hazardous Air Pollutants (NESHAP) Including Maximum Achievable Control Technology (MACT) Standards
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Delegation of authority.
      This document is effective on February 27, 2015. The dates of delegation can be found in the SUPPLEMENTARY INFORMATION section of this document.
      40 CFR Parts 60, 61, and 63

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2014-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 63 after this date.

  • 2015-02-27; vol. 80 # 39 - Friday, February 27, 2015
    1. 80 FR 10596 - Delegation of Authority to the States of Iowa; Kansas; Missouri; Nebraska; Lincoln-Lancaster County, NE; and City of Omaha, NE., for New Source Performance Standards (NSPS), National Emission Standards for Hazardous Air Pollutants (NESHAP) Including Maximum Achievable Control Technology (MACT) Standards
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Delegation of authority.
      This document is effective on February 27, 2015. The dates of delegation can be found in the SUPPLEMENTARY INFORMATION section of this document.
      40 CFR Parts 60, 61, and 63