40 CFR Appendix Table 2 to Subpart MMMMM of Part 63 - Table 2 to Subpart MMMMM of Part 63—Operating Limits for Existing, New, or Reconstructed Flame Lamination Affected Sources
Table 2 to Subpart MMMMM of Part 63—Operating Limits for Existing, New, or Reconstructed Flame Lamination Affected Sources
As stated in § 63.8790(b), you must comply with the applicable operating limits in the following table:
For each . . . | You must . . . |
---|---|
1. Scrubber | a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performance test. |
b. Maintain the daily average scrubber effluent pH within the operating range value established during the performance test. | |
c. If you use a venturi scrubber, maintain the daily average pressure drop across the venturi within the operating range value established during the performance test. | |
2. Other type of control device to which flame lamination emissions are ducted | Maintain your operating parameter(s) within the ranges established during the performance test and according to your monitoring plan. |
[68 FR 18070, Apr. 14, 2003, as amended at 86 FR 64402, Nov. 18, 2021]