46 CFR § 180.137 - Stowage of life floats and buoyant apparatus.
(a) In addition to meeting § 180.130, each life float and buoyant apparatus must be stowed as required under this section,
(2) Of proper strength for the size of the life float or buoyant apparatus as indicated on its identification tag; and
(3) Secured to the painter at one end and to the vessel on the other end.
(1) Have a breaking strength of at least the breaking strength of the painter;
(2) If synthetic, be of a dark color or of a type certified to be resistant to deterioration from ultraviolet light; and
(3) If metal, be corrosion resistant.
(d) If the life float or buoyant apparatus does not have a painter attachment fitting, a means for attaching the painter must be provided by a wire or line that:
(1) Encircles the body of the device;
(2) Will not slip off;
(3) Has a breaking strength that is at least the strength of the painter; and
(4) If synthetic, is of a dark color or is of a type certified to be resistant to deterioration from ultraviolet light.
(1) The combined weight of each group of life floats and buoyant apparatus must not exceed 181 kilograms (400 pounds);
(3) Each life float and buoyant apparatus must be individually attached to the painter by a line meeting § 180.175(f)(3) (ii), (iii), and (iv) and long enough that each life float or buoyant apparatus can float without contacting any other life float or buoyant apparatus in the group; and
(4) The strength of the float-free link under paragraph (b)(2) of this section and the strength of the painter under § 180.175(f)(3)(ii) must be determined by the combined capacity of the group of life floats and buoyant apparatus.
(f) Life floats and buoyant apparatus must not be stowed in tiers more than 1,220 millimeters (4 feet) high. When stowed in tiers, the separate units must be kept apart by spacers.
The following state regulations pages link to this page.