47 CFR § 20.19 - Hearing aid-compatible mobile handsets.

prev | next
§ 20.19 Hearing aid-compatible mobile handsets.

(a) Definitions. For purposes of this section:

2007 ANSI standard refers to the technical standard for hearing aid compatibility applicable to frequencies between 800 MHz and 3 GHz as set forth in ANSI C63.19–2007.

2011 ANSI standard refers to the technical standard for hearing aid compatibility applicable to frequencies between 698 MHz and 6 GHz as set forth in ANSI C63.19–2011.

2019 ANSI standard refers to the technical standard for hearing aid compatibility applicable to frequencies between 614 MHz and 6 GHz as set forth in ANSI C63.19–2019.

ANSI standard refers to the 2007, 2011, and 2019 ANSI standards as a group.

Any version of the ANSI standard previous to the 2019 ANSI standard refers to the 2007 and 2011 ANSI standards.

Digital mobile service refers to a terrestrial mobile service that enables two-way real-time voice communications among members of the public or a substantial portion of the public, including both interconnected and non-interconnected voice over internet protocol (VoIP) services, to the extent that such service is provided over frequencies specified in the 2007 ANSI standard, 2011 ANSI standard or the 2019 ANSI standard.

Handset refers to a device used in delivery of digital mobile service in the United States that contains a built-in speaker and is typically held to the ear in any of its ordinary uses.

Manufacturer refers to a manufacturer of handsets that are used in delivery of digital mobile service, as defined in this section, in the United States.

Model refers to a wireless handset device that a manufacturer has designated as a distinct device model, consistent with its own marketing practices. However, if a manufacturer assigns different model device designations solely to distinguish units sold to different carriers, or to signify other distinctions that do not relate to either form, features, or capabilities, such designations shall not count as distinct models for purposes of this section.

Service provider refers to a provider of digital mobile service, as defined in this section, in the United States.

Tier I carrier refers to a CMRS provider that offers such service nationwide.

Volume control requirements refers to the technical standard established by ANSI/TIA–5050–2018.

(b) Hearing aid compatibility; technical standards—(1) Handset compatibility on or after June 5, 2023. In order to satisfy a manufacturer or service provider's obligations under paragraphs (c) and (d) of this section, a handset submitted for equipment certification or for a permissive change relating to hearing aid compatibility on or after June 5, 2023 must meet the 2019 ANSI standard.

(2) Handset compatibility before June 5, 2023. In order to satisfy a manufacturer or service provider's obligations under paragraphs (c) and (d) of this section, a handset submitted for equipment certification or for a permissive change relating to hearing aid compatibility before June 5, 2023 must meet either:

(i) At a minimum, the M3 and T3 ratings associated with the 2011 ANSI standard; or

(ii) The 2019 ANSI standard.

(3) Handsets operating over multiple frequency bands or air interfaces.

(i) Beginning on June 5, 2023, a handset is hearing aid-compatible if it meets the 2019 ANSI standard for all frequency bands that are specified in the ANSI standard and all air interfaces over which it operates on those frequency bands, and the handset has been certified as compliant with the test requirements for the 2019 ANSI standard pursuant to § 2.1033(d) of this chapter.

(ii) Before June 5, 2023, a handset that uses only the frequencies specified in the 2011 ANSI standard is hearing aid-compatible with regard to radio frequency interference and inductive coupling if it meets the 2011 ANSI standard for all frequency bands and air interfaces over which it operates, and the handset has been certified as compliant with the test requirements for the 2011 ANSI standard pursuant to § 2.1033(d) of this chapter. Before June 5, 2023, a handset that incorporates operations outside the frequencies specified in the 2011 ANSI standard is hearing aid-compatible if the handset otherwise satisfies the requirements of this paragraph (b).

(4) Factual questions. All factual questions of whether a handset meets the technical standard(s) of this paragraph (b) shall be referred for resolution to the Chief, Office of Engineering and Technology, Federal Communications Commission, 45 L Street NE, Washington, DC 20554.

(5) Certification. A handset certified under any version of the ANSI standard previous to the 2019 ANSI standard remains hearing aid-compatible for purposes of this section.

(c) Phase-in of hearing aid-compatibility requirements. The following applies to each manufacturer and service provider that offers handsets used to deliver the services specified in paragraph (a) of this section and that does not fall within the de minimis exception set forth in paragraph (e) of this section.

(1) Manufacturers—Number of hearing aid-compatible handset models offered. For each digital air interface for which it offers handsets in the United States or imported for use in the United States, each manufacturer must offer hearing aid compatible handsets as follows:

(i) Beginning October 3, 2018, at least sixty-six (66) percent of those handset models (rounded down to the nearest whole number) must be hearing aid-compatible under paragraph (b) of this section.

(ii) Beginning October 4, 2021, at least eighty-five (85) percent of those handset models (rounded down to the nearest whole number) must be hearing aid-compatible under paragraph (b) of this section.

(2) Tier I carriers—Number of hearing aid-compatible handsets models offered. For each digital air interface for which it offers handsets to customers, each Tier I carrier must:

(i) Beginning April 3, 2019, ensure that at least sixty-six (66) percent of the handset models it offers are hearing aid-compatible under paragraph (b) of this section, calculated based on the total number of unique handset models the carrier offers nationwide.

(ii) Beginning April 4, 2022, ensure that at least eighty-five (85) percent of the handset models it offers are hearing aid-compatible under paragraph (b) of this section, calculated based on the total number of unique handset models the carrier offers nationwide.

(3) Service providers other than Tier I carriers—Number of hearing aid-compatible handsets models offered. For each digital air interface for which it offers handsets to customers, each service provider other than a Tier I carrier must:

(i) Beginning April 3, 2020, ensure that at least sixty-six (66) percent of the handset models it offers are hearing aid-compatible under paragraph (b) of this section, calculated based on the total number of unique handset models the carrier offers.

(ii) Beginning April 3, 2023, ensure that at least eighty-five (85) percent of the handset models it offers are hearing aid-compatible under paragraph (b) of this section, calculated based on the total number of unique handset models the carrier offers.

(4) In-store testing. All service providers must make available for consumers to test, in each retail store owned or operated by the service provider, all of its handset models that are hearing aid-compatible under paragraph (b) of this section.

(d) [Reserved]

(e) De minimis exception. (1)(i) Manufacturers or service providers that offer two or fewer handsets in an air interface in the United States are exempt from the requirements of this section in connection with that air interface, except with regard to the reporting and certification requirements in paragraph (i) of this section. Service providers that obtain handsets only from manufacturers that offer two or fewer handset models in an air interface in the United States are likewise exempt from the requirements of this section other than paragraph (i) of this section in connection with that air interface.

(ii) Notwithstanding paragraph (e)(1)(i) of this section, manufacturers that have had more than 750 employees for at least two years and service providers that have had more than 1500 employees for at least two years, and that have been offering handsets over an air interface for at least two years, that offer one or two handsets in that air interface in the United States must offer at least one handset model that is hearing aid-compatible under paragraph (b) of this section in that air interface. Service providers that obtain handsets only from manufacturers that offer one or two handset models in an air interface in the United States, and that have had more than 750 employees for at least two years and have offered handsets over that air interface for at least two years, are required to offer at least one handset model in that air interface that is hearing aid-compatible under paragraph (b) of this section. For purposes of this paragraph (e)(1)(ii), employees of a parent, subsidiary, or affiliate company under common ownership or control with a manufacturer or service provider are considered employees of the manufacturer or service provider. Manufacturers and service providers covered by this paragraph (e)(1)(ii) must also comply with all other requirements of this section.

(2) Manufacturers or service providers that offer three handset models in an air interface must offer at least one handset model that is hearing aid-compatible under paragraph (b) of this section in that air interface. Service providers that obtain handsets only from manufacturers that offer three handset models in an air interface in the United States are required to offer at least one handset model in that air interface that is hearing aid-compatible under paragraph (b) of this section.

(3) Manufacturers that offer four or five handset models in an air interface must offer at least two handset models that are hearing aid-compatible under paragraph (b) of this section in that air interface. Tier I carriers who offer four handset models in an air interface must offer at least two handsets that are hearing aid-compatible under paragraph (b) of this section in that air interface and Tier I carriers who offer five handset models in an air interface must offer at least three handsets that are hearing aid-compatible under paragraph (b) of this section in that air interface. Service providers, other than Tier I carriers, who offer four handset models in an air interface must offer at least two handset models that are hearing aid-compatible under paragraph (b) of this section in that air interface and service providers, other than Tier I carriers, who offer five handset models in an air interface must offer at least three handsets that are hearing aid-compatible under paragraph (b) of this section in that air interface.

(f) Labeling and disclosure requirements for hearing aid-compatible handsets—(1) Package label. For all handset models certified to be hearing aid-compatible, manufacturers and service providers shall ensure that the handset's package label states that the handset is hearing aid-compatible and the handset's actual conversational gain with and without a hearing aid if certified using a technical standard with volume control requirements. The actual conversational gain displayed for use with a hearing aid shall be the lowest rating assigned to the handset for any covered air interface or frequency band.

(2) Package insert or handset manual. For all handset models certified to be hearing aid-compatible, manufacturers and service providers shall disclose to consumers through the use of a package insert or in the handset's user manual:

(i) That the handset is hearing aid-compatible;

(ii) The ANSI standard used to determine the hearing aid compatibility of the handset model's air interfaces and frequency bands;

(iii) If using the 2011 ANSI standard or an earlier version of the standard, the lowest hearing aid compatibility rating assigned to any of the covered air interfaces or frequency bands;

(iv) The air interfaces or frequency bands on the handset that are not certified to be hearing aid-compatible, if applicable, or have been determined to be hearing aid-compatible under special testing circumstances;

(v) Any handset model certified to be hearing aid-compatible for some but not all of the air interfaces or frequency bands covered by the model must include the following disclosure language:

This phone has been tested and certified for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.

(vi) An explanation of the ANSI rating system, which includes an explanation that the 2019 ANSI standard does not use the rating system that older versions of the standard used;

(vii) An explanation of a handset model's volume control capabilities, including its conversational gain both with and without hearing aids, if the handset is certified using a technical standard that includes volume control requirements; and

(viii) An explanation of special testing circumstances, if a handset model has air interfaces that have been certified as hearing aid-compatible under such circumstances, and how these circumstances affect the use and operation of the handset.

(g) Model designation requirements. Where a manufacturer has made physical changes to a handset that result in a change in the hearing aid compatibility rating under the 2011 ANSI standard or an earlier version of the standard, the altered handset must be given a model designation distinct from that of the handset prior to its alteration.

(h) Website and record retention requirements.

(1) Each manufacturer and service provider that operates a publicly-accessible website must make available on its website a list of all hearing aid-compatible models currently offered, the ANSI standard used to evaluate hearing aid compatibility, the ratings of those models under the relevant ANSI standard, if applicable, and an explanation of the rating system. Each service provider must also include on its website: A list of all non-hearing aid-compatible models currently offered, as well as a link to the current FCC web page containing information about the wireless hearing aid compatibility rules and service providers' obligations. Each service provider must also include the marketing model name/number(s) and FCC ID number of each hearing aid-compatible and non-hearing aid-compatible model currently offered.

(2) Service providers must maintain on their website either:

(i) A link to a third-party website as designated by the Commission or Wireless Telecommunications Bureau with information regarding hearing aid-compatible and non-hearing aid-compatible handset models; or

(ii) A clearly marked list of hearing aid-compatible handset models that are no longer offered if the calendar month/year that model was last offered is within 24 months of the current calendar month/year along with the information listed in paragraph (h)(1) of this section for each hearing aid-compatible handset.

(3) If the Wireless Telecommunications Bureau determines that the third-party website has been eliminated or is not updated in a timely manner, it may select another website or require service providers to comply with paragraph (h)(2)(ii) of this section.

(4) The information on the website must be updated within 30 days of any relevant changes, and any website pages containing information so updated must indicate the day on which the update occurred.

(5) Service providers must maintain internal records including the ratings, if applicable, of all hearing aid-compatible and non-hearing aid-compatible models no longer offered (if the calendar month/year that model was last offered is within 24 months of the current calendar month/year); for models no longer offered (if the calendar month/year that model was last offered is within 24 months of the current calendar month/year), the calendar months and years each hearing aid-compatible and non-hearing aid-compatible model was first and last offered; and the marketing model name/number(s) and FCC ID number of each hearing aid-compatible and non-hearing aid-compatible model no longer offered (if the calendar month/year that model was last offered is within 24 months of the current calendar month/year).

(i) Reporting requirements—(1) Reporting and certification dates. Service providers shall submit Form 855 certifications on their compliance with the requirements of this section by January 31 of each year. Manufacturers shall submit Form 655 reports on their compliance with the requirements of this section by July 31 of each year. Information in each certification and report must be up-to-date as of the last day of the calendar month preceding the due date of each certification and report.

(2) Content of service provider certifications. Certifications filed by service providers must include:

(i) The name of the signing executive and contact information;

(ii) The company(ies) covered by the certification;

(iii) The FCC Registration Number (FRN);

(iv) If the service provider is subject to paragraph (h) of this section, the website address of the page(s) containing the required information regarding handset models;

(v) The percentage of handsets offered that are hearing aid-compatible (providers will derive this percentage by determining the number of hearing aid-compatible handsets offered across all air interfaces during the year divided by the total number of handsets offered during the year); and

(vi) The following language:

I am a knowledgeable executive [of company x] regarding compliance with the Federal Communications Commission's wireless hearing aid compatibility requirements at a wireless service provider covered by those requirements.

I certify that the provider was [(in full compliance/not in full compliance)] [choose one] at all times during the applicable time period with the Commission's wireless hearing aid compatibility deployment benchmarks and all other relevant wireless hearing aid compatibility requirements.

The company represents and warrants, and I certify by this declaration under penalty of perjury pursuant to 47 CFR 1.16 that the above certification is consistent with 47 CFR 1.17, which requires truthful and accurate statements to the Commission. The company also acknowledges that false statements and misrepresentations to the Commission are punishable under Title 18 of the U.S. Code and may subject it to enforcement action pursuant to Sections 501 and 503 of the Act.

(vii) If the company selected that it was not in full compliance with this section, an explanation of which wireless hearing aid compatibility requirements it was not in compliance with, when the non-compliance began and (if applicable) ended with respect to each requirement.

(3) Content of manufacturer reports. Reports filed by manufacturers must include:

(i) Handset models tested, since the most recent report, for compliance with the applicable hearing aid compatibility technical ratings, if applicable;

(ii) Compliant handset models offered to service providers since the most recent report, identifying each model by marketing model name/number(s) and FCC ID number;

(iii) For each compliant model, the air interface(s) and frequency band(s) over which it operates, the hearing aid compatibility ratings for each frequency band and air interface under the ANSI standard (if applicable), the ANSI standard version used, and the months in which the model was available to service providers since the most recent report;

(iv) Non-compliant models offered to service providers since the most recent report, identifying each model by marketing model name/number(s) and FCC ID number;

(v) For each non-compliant model, the air interface(s) over which it operates and the months in which the model was available to service providers since the most recent report;

(vi) Total numbers of compliant and non-compliant models offered to service providers for each air interface as of the time of the report;

(vii) Any instance, as of the date of the report or since the most recent report, in which multiple compliant or non-compliant devices were marketed under separate model name/numbers but constitute a single model for purposes of the hearing aid compatibility rules, identifying each device by marketing model name/number and FCC ID number;

(viii) Status of product labeling;

(ix) Outreach efforts; and

(x) If the manufacturer maintains a public website, the website address of the page(s) containing the information regarding hearing aid-compatible handset models required by paragraph (h) of this section.

(4) Format. The Wireless Telecommunications Bureau is delegated authority to approve or prescribe forms, formats, and methods for submission of the reports and certifications in addition to or instead of those required by this section. Any format that the Bureau may approve or prescribe shall be made available on the Bureau's website.

(j) Enforcement. Enforcement of this section is hereby delegated to those states that adopt this section and provide for enforcement. The procedures followed by a state to enforce this section shall provide a 30-day period after a complaint is filed, during which time state personnel shall attempt to resolve a dispute on an informal basis. If a state has not adopted or incorporated this section, or failed to act within six (6) months from the filing of a complaint with the state public utility commission, the Commission will accept such complaints. A written notification to the complainant that the state believes action is unwarranted is not a failure to act. The procedures set forth in part 68, subpart E of this chapter are to be followed.

(k) Delegation of rulemaking authority.

(1) The Chief of the Wireless Telecommunications Bureau and the Chief of the Office of Engineering and Technology are delegated authority to issue, consistent with any applicable requirements of 5 U.S.C. 553, an order amending this section to the extent necessary to adopt technical standards for additional frequency bands and/or air interfaces upon the establishment of such standards by ANSI Accredited Standards Committee C63®, provided that the standards do not impose with respect to such frequency bands or air interfaces materially greater obligations than those imposed on other services subject to this section. Any new obligations on manufacturers and Tier I carriers pursuant to paragraphs (c) through (i) of this section as a result of such standards shall become effective no less than one year after release of the order adopting such standards and any new obligations on other service providers shall become effective no less than 15 months after the release of such order, except that any new obligations on manufacturers and service providers subject to paragraph (e)(1)(ii) of this section shall become effective no less than two years after the release of such order.

(2) The Chief of the Wireless Telecommunications Bureau and the Chief of the Office of Engineering and Technology are delegated authority, by notice-and-comment rulemaking if required by statute or otherwise in the public interest, to issue an order amending this section to the extent necessary to approve any version of the technical standards for radio frequency interference, inductive coupling, or volume control adopted subsequently to the 2007 ANSI standard for use in determining whether a wireless handset meets the appropriate rating over frequency bands and air interfaces for which technical standards have previously been adopted either by the Commission or pursuant to paragraph (k)(1) of this section. This delegation is limited to the approval of changes to the technical standards that do not raise major compliance issues. Further, by such approvals, the Chiefs may only permit, and not require, the use of such subsequent versions of the technical standards to establish hearing aid compatibility.

(l) Incorporation by reference. The standards required in this section are incorporated by reference into this section with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at the Federal Communications Commission (FCC) and the National Archives and Records Administration (NARA). Contact the FCC through the Federal Communications Commission's Reference Information Center, phone: (202) 418–0270. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations.html or email fr.inspection@nara.gov. The material may be obtained from the following sources in this paragraph (l):

(1) IEEE Standards Association (IEEE–SA), 445 Hoes Lane, Piscataway, NJ 08854–4141, (732) 981–0060, stds-info@ieee.org, https://standards.ieee.org/.

(i) ANSI C63.19–2007, American National Standard Methods of Measurement of Compatibility Between Wireless Communication Devices and Hearing Aids, approved June 8, 2007.

(ii) ANSI C63.19–2011, American National Standard Methods of Measurement of Compatibility Between Wireless Communication Devices and Hearing Aids, approved May 27, 2011.

(iii) ANSI C63.19–2019, American National Standard Methods of Measurement of Compatibility Between Wireless Communication Devices and Hearing Aids, approved August 19, 2019.

(2) Telecommunications Industry Association (TIA), 1320 North Courthouse Road, Suite 200, Arlington, VA 22201, (703) 907–7700, global@ihs.com, https://global.ihs.com/csf_home.cfm?&csf=TIA.

(i) ANSI/TIA–5050–2018, Telecommunications—Communications Products—Receive Volume Control Requirements for Wireless (Mobile) Devices, approved January 17, 2018.

(ii) [Reserved]

[73 FR 25587, May 7, 2008, as amended at 75 FR 54522, Sept. 8, 2010; 77 FR 41928, July 17, 2012; 81 FR 183, Jan. 5, 2016; 81 FR 60633, Sept. 2, 2016; 83 FR 8631, Feb. 28, 2018; 83 FR 63105, Dec. 7, 2018; 84 FR 37592, Aug. 1, 2019; 86 FR 23625, 23627, May 4, 2021; 88 FR 21439, Apr. 10, 2023]