Jump to navigation
(a) Insulation shall be of sufficient thickness so that the thermal conductance at 60 °F. is not more than 0.075 Btu per hour, per square foot, per degree F. temperature differential.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 5101 - Purpose
§ 5102 - Definitions
§ 5103 - General regulatory authority
§ 5103a - Limitation on issuance of hazmat licenses
§ 5104 - Representation and tampering
§ 5105 - Transporting certain highly radioactive material
§ 5106 - Handling criteria
§ 5107 - Hazmat employee training requirements and grants
§ 5108 - Registration
§ 5109 - Motor carrier safety permits
§ 5110 - Shipping papers and disclosure
§ 5111 - Repealed. Pub. L. 109–59, title VII, § 7111, Aug. 10, 2005, 119 Stat. 1899]
§ 5112 - Highway routing of hazardous material
§ 5113 - Unsatisfactory safety rating
§ 5114 - Air transportation of ionizing radiation material
§ 5115 - Training curriculum for the public sector
§ 5116 - Planning and training grants, monitoring, and review
§ 5117 - Special permits and exclusions
§ 5118 - Hazardous material technical assessment, research and development, and analysis program
§ 5119 - Uniform forms and procedures
§ 5120 - International uniformity of standards and requirements
§ 5121 - Administrative
§ 5122 - Enforcement
§ 5123 - Civil penalty
§ 5124 - Criminal penalty
§ 5125 - Preemption
§ 5126 - Relationship to other laws
§ 5127 - Judicial review
§ 5128 - Authorization of appropriations
Title 49 published on 16-Dec-2017 04:00
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR Part 179 after this date.
PHMSA is extending the comment period for an advance notice of proposed rulemaking that was published in the Federal Register on January 18, 2017. In response to stakeholder requests, the comment period will be extended for an additional 60 days, from March 20, 2017 to May 19, 2017.
PHMSA is considering revising the Hazardous Materials Regulations (HMR) to establish vapor pressure limits for unrefined petroleum-based products and potentially all Class 3 flammable liquid hazardous materials that would apply during the transportation of the products or materials by any mode. PHMSA is currently assessing the merits of a petition for rulemaking submitted by the Attorney General of the State of New York regarding vapor pressure standards for the transportation of crude oil. The petition requests that PHMSA implement a Reid Vapor Pressure (RVP) limit less than 9.0 pounds per square inch (psi) for crude oil transported by rail. PHMSA will use the comments in response to this ANPRM to help assess and respond to the petition and to evaluate any other potential regulatory actions related to sampling and testing of crude oil and other Class 3 hazardous materials. PHMSA will also evaluate the potential safety benefits and costs of utilizing vapor pressure thresholds within the hazardous materials classification process for unrefined petroleum-based products and Class 3 hazardous materials.
The Pipeline and Hazardous Materials Safety Administration is issuing this final rule to codify in the Hazardous Materials Regulations certain mandates and minimum requirements of the FAST Act. Specifically, the FAST Act mandates a revised phase-out schedule for all DOT Specification 111 tank cars used to transport unrefined petroleum products ( e.g., petroleum crude oil), ethanol, and other Class 3 flammable liquids. The FAST Act also requires that each tank car built to meet the DOT Specification 117 and each non-jacketed tank car retrofitted to meet the DOT Specification 117R be equipped with a thermal protection blanket that is at least 1/2 -inch thick and meets existing thermal protection standards. Further, the FAST Act mandates minimum top fittings protection requirements for tank cars retrofitted to meet the DOT Specification 117R.
In this final rule, the Pipeline and Hazardous Materials Safety Administration (PHMSA) is amending the Hazardous Materials Regulations (HMR) to make miscellaneous amendments in order to update and clarify certain regulatory requirements. These amendments are designed to promote safer transportation practices, address petitions for rulemaking, respond to National Transportation Safety Board (NTSB) Safety Recommendations, facilitate international commerce, make editorial corrections, and simplify the regulations. The amendments in this rulemaking include, but are not limited to, removing the packing group (PG) II designation for certain organic peroxides, self-reactive substances, and explosives; incorporating requirements for trailers of manifolded acetylene cylinders; providing requirements to allow for shipments of damaged wet electric batteries; and revising the requirements for the packaging of nitric acid, testing of pressure relief devices on cargo tanks, and shipments of black or smokeless powder for small arms.
This SNPRM proposes to incorporate and allow the use of the 2015 edition of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XII—Rules for Construction and Continued Service of Transport Tanks for the construction and continued service of cargo tank motor vehicles (CTMVs), cryogenic portable tanks, and multi-unit tank car tanks (“ton tanks”). The PHMSA also proposes to incorporate and authorize the use of the 2015 edition of the National Board of Boiler and Pressure Vessel Inspectors National Board Inspection Code, in our regulations as it applies to the continued service of CTMVs, cryogenic portable tanks, and ton tanks constructed to ASME Section XII standards, as well as for existing CTMVs constructed in accordance with the current hazardous materials regulations. If adopted, these amendments will allow for flexibility regarding selection of authorized packaging, in addition to qualification and maintenance for continued service of the packaging, without compromising safety.
On May 8, 2015, the Pipeline and Hazardous Materials Safety Administration, in coordination with the Federal Railroad Administration (FRA), published a final rule entitled “Hazardous Materials: Enhanced Tank Car Standards and Operational Controls for High-Hazard Flammable Trains,” which adopted requirements designed to reduce the consequences and, in some instances, reduce the probability of accidents involving trains transporting large quantities of Class 3 flammable liquids. The Hazardous Materials Regulations provide a person the opportunity to appeal a PHMSA action, including a final rule. PHMSA received six appeals regarding the final rule, one of which was withdrawn. This document responds to the five remaining appeals submitted by the Dangerous Goods Advisory Council (DGAC), American Chemistry Council (ACC), Association of American Railroads (AAR), American Fuel & Petrochemical Manufacturers (AFPM), and jointly the Umatilla, Yakama, Warm Springs, and Nez Perce tribes (Columbia River Treaty Tribes) and the Quinault Indian Nation (Northwest Treaty Tribes).
In this final rule, the Pipeline and Hazardous Materials Safety Administration (PHMSA), in coordination with the Federal Railroad Administration (FRA), is adopting requirements designed to reduce the consequences and, in some instances, reduce the probability of accidents involving trains transporting large quantities of flammable liquids. The final rule defines certain trains transporting large volumes of flammable liquids as “high-hazard flammable trains” (HHFT) and regulates their operation in terms of speed restrictions, braking systems, and routing. The final rule also adopts safety improvements in tank car design standards, a sampling and classification program for unrefined petroleum-based products, and notification requirements. These operational and safety improvements are necessary to address the unique risks associated with the growing reliance on trains to transport large quantities of flammable liquids. They incorporate recommendations from the National Transportation Safety Board (NTSB) and from the public comments, and are supported by a robust economic impact analysis.
PHMSA proposes to make miscellaneous amendments to the Hazardous Materials Regulations to update and clarify certain regulatory requirements. These proposed amendments are designed to promote safer transportation practices, address petitions for rulemaking, respond to National Transportation Safety Board (NTSB) Safety Recommendations, facilitate international commerce, make editorial corrections, and simplify the regulations. The proposed provisions in this rulemaking include, but are not limited to, removing the packing group (PG) II designation for certain organic peroxides, self-reactive substances and explosives, incorporating requirements for trailers of manifolded acetylene cylinders, and providing requirements to allow for shipments of damaged wet electric batteries. In addition, this rulemaking proposes to revise the requirements for the packaging of nitric acid, testing of pressure relief devices on cargo tanks, and shipments of black or smokeless powder for small arms.
The Pipeline and Hazardous Materials Safety Administration (PHMSA or we), in coordination with the Federal Railroad Administration (FRA), is proposing: new operational requirements for certain trains transporting a large volume of Class 3 flammable liquids; improvements in tank car standards; and revision of the general requirements for offerors to ensure proper classification and characterization of mined gases and liquids. These proposed requirements are designed to lessen the frequency and consequences of train accidents/incidents (train accidents) involving certain trains transporting a large volume of flammable liquids. The growing reliance on trains to transport large volumes of flammable liquids poses a significant risk to life, property, and the environment. These significant risks have been highlighted by the recent instances of trains carrying crude oil that derailed in Casselton, North Dakota; Aliceville, Alabama; and Lac-Mégantic, Quebec, Canada. The proposed changes also address National Transportation Safety Board (NTSB) safety recommendations on the accurate classification and characterization of such commodities, enhanced tank car construction, and rail routing.
PHMSA is notifying the public of our intent to extend the comment period by 30 days for a notice of proposed rulemaking published on September 6, 2013.
This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations (HMR). The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.
PHMSA is considering revisions to the Hazardous Materials Regulations (HMR) to improve the regulations applicable to the transportation of hazardous materials by rail. The revisions are based on eight petitions received from the regulated community and four National Transportation Safety Board (NTSB) Recommendations which are referenced by a petition. In this ANPRM, we outline the petitions and NTSB recommendations, identify a preliminary estimate of costs and benefits from the petitions, pose several questions, and solicit comments and data from the public. Under Executive Order 13563, Federal agencies were asked to periodically review existing regulations. The questions posed in this ANPRM and responses by commenters will be used in conjunction with a retrospective review of existing requirements aimed to modify, streamline, expand, or repeal existing rules that are outmoded, ineffective, insufficient, or excessively burdensome.
This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations. The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.
The Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations to incorporate provisions contained in certain widely used or longstanding rail special permits that have general applicability and established safety records. Special permits allow a company or an individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. Incorporating the special permits discussed in this rulemaking will provide users of the regulations with wider access to the regulatory flexibility offered in these special permits, eliminate the need for numerous renewal requests, reduce paperwork burdens, and facilitate commerce while maintaining an appropriate level of safety. This rulemaking will also respond to two petitions for rulemaking, P-1497, concerning the use of electronic shipping papers, and P-1567, concerning the removal of the Association of American Railroad's AAR-600 portable tank program for previously adopted standards that meet or exceed the AAR-600 requirements.
On January 25, 2011, FRA published a Federal Register document stating that markings on tank cars related to certain gross weight on rail (GRL) Special Permits that had been incorporated into the hazardous materials regulations (HMR) by a Pipeline and Hazardous Materials Safety Administration (PHMSA) rulemaking were required to be removed or obliterated by January 25, 2012, or at each subject tank car's first shopping event, whichever occurred first. This document relieves tank car owners from that previously stated deadline and extends the time for removal of the markings until the date of each subject tank car's next required qualification.