49 CFR 574.6 - Identification mark.
To obtain a plant code required by § 574.5(b)(1), each manufacturer of new or retreaded pneumatic tires, non-pneumatic tires, or non-pneumatic tire assemblies must apply in writing to the Office of Vehicle Safety Compliance, National Highway Traffic Safety Administration, 1200 New Jersey Ave. SW., Washington, DC 20590, identify itself as a tire manufacturer or retreader, and furnish the following information:
(a) The name, or other designation identifying the applicant, and its main office address;
(b) The name, or other identifying designation, of each individual plant operated by the manufacturer and the address of each plant, if applicable;
(c) The name, or other identifying designation, of the corporate owner, if applicable, of each plant;
(d) The email addresses, phone numbers, and fax numbers for each person or corporation listed, including the main office; and
(e) The type of tires manufactured at each plant, e.g., pneumatic tires for passenger cars, buses, trucks, or motorcycles; pneumatic retreaded tires; or non-pneumatic tires or non-pneumatic tire assemblies.
Title 49 published on 2014-10-01
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR Part 574 after this date.