49 CFR Part 178, Appendix C to Part 178 - Nominal and Minimum Thicknesses of Steel Drums and Jerricans

Status message

There is 1 Update appearing in the Federal Register for 49 CFR Part 178. View below or at eCFR (GPOAccess)
View PDF at GPO Pt. 178, App. C
Appendix C to Part 178—Nominal and Minimum Thicknesses of Steel Drums and Jerricans
For each listed packaging capacity, the following table compares the ISO 3574 (IBR, see § 171.7 of this subchapter) nominal thickness with the corresponding ISO 3574 minimum thickness.
Maximum capacity (L) ISO nominal (mm) Corresponding ISO minimum (mm)
20 0.7 0.63
30 0.8 0.73
40 0.8 0.73
60 1.0 0.92
120 1.0 0.92
220 1.0 0.92
450 1.9 1.77
[Amdt. 178-106, 59 FR 67522, Dec. 29, 1994, as amended at 68 FR 75758, Dec. 31, 2003]

Title 49 published on 2015-10-01.

The following are only the Rules published in the Federal Register after the published date of Title 49.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2015-11-23; vol. 80 # 225 - Monday, November 23, 2015
    1. 80 FR 72914 - Hazardous Materials: Editorial Corrections and Clarifications (RRR)
      GPO FDSys: XML | Text
      DEPARTMENT OF TRANSPORTATION, Pipeline and Hazardous Materials Safety Administration
      Final rule.
      This regulation is effective December 23, 2015.
      49 CFR Parts 171, 172, 173, 175, 176, 177, 178 and 180

Title 49 published on 2015-10-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR Part 178 after this date.

  • 2015-11-23; vol. 80 # 225 - Monday, November 23, 2015
    1. 80 FR 72914 - Hazardous Materials: Editorial Corrections and Clarifications (RRR)
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Pipeline and Hazardous Materials Safety Administration
      Final rule.
      This regulation is effective December 23, 2015.
      49 CFR Parts 171, 172, 173, 175, 176, 177, 178 and 180