50 CFR § 229.34 - Harbor Porpoise Take Reduction Plan Regulations—Mid-Atlantic.

§ 229.34 Harbor Porpoise Take Reduction Plan Regulations—Mid-Atlantic.

(a)

(1) Regulated waters. The regulations in this section apply to all waters in the Mid-Atlantic bounded on the east by 72°30′ W. long. at the southern coast of Long Island, NY at 40°50.1′ N. lat. and on the south by the NC/SC border (33°51.1′ N. lat.), except for the areas exempted in paragraph (a)(2) of this section.

(2) Exempted waters. The regulations within this section are not applicable to waters landward of the first bridge over any embayment, harbor, or inlet, or to waters landward of the following lines:

New York
40°45.70′ N., 72°45.15′ W. to 40°45.72′ N., 72°45.30′ W. (Moriches Bay Inlet)
40°37.32′ N., 73°18.40′ W. to 40°38.00′ N., 73°18.56′ W. (Fire Island Inlet)
40°34.40′ N., 73°34.55′ W. to 40°35.08′ N., 73°35.22′ W. (Jones Inlet)
New Jersey/Delaware
39°45.90′ N., 74°05.90′ W. to 39°45.15′ N., 74°06.20′ W. (Barnegat Inlet)
39°30.70′ N., 74°16.70′ W. to 39°26.30′ N., 74°19.75′ W. (Beach Haven to Brigantine Inlet)
38°56.20′ N., 74°51.70′ W. to 38°56.20′ N., 74°51.90′ W. (Cape May Inlet)

All marine and tidal waters landward of the 72 COLREGS demarcation line (International Regulations for Preventing Collisions at Sea, 1972), as depicted or noted on nautical charts published by NOAA (Coast Charts 1:80,000 scale), and as described in 33 CFR part 80. (Delaware Bay)

Maryland/Virginia
38°19.48′ N., 75°05.10′ W. to 38°19.35′ N., 75°05.25′ W. (Ocean City Inlet)

All marine and tidal waters landward of the 72 COLREGS demarcation line (International Regulations for Preventing Collisions at Sea, 1972), as depicted or noted on nautical charts published by NOAA (Coast Charts 1:80,000 scale), and as described in 33 CFR part 80. (Chincoteague to Ship Shoal Inlet)

37°11.10′ N., 75°49.30′ W. to 37°10.65′ N., 75°49.60′ W. (Little Inlet)
37°07.00′ N., 75°53.75′ W. to 37°05.30′ N., 75°56.′ W. (Smith Island Inlet)
North Carolina

All marine and tidal waters landward of the 72 COLREGS demarcation line (International Regulations for Preventing Collisions at Sea, 1972), as depicted or noted on nautical charts published by NOAA (Coast Charts 1:80,000 scale), and as described in 33 CFR part 80.

(b) Restrictions—(1) Waters off New Jersey Management Area. The Waters off New Jersey Management Area is bounded by straight lines connecting the following points in the order stated:

Waters Off New Jersey Management Area

Point N. Lat. W. Long.
WNJ1 40°50.1′ 72°30.0′ (NY shoreline)
WNJ2 38°47.0′ 72°30.0′
WNJ3 38°47.0′ 75°05.0′ (DE shoreline)

(i) Closure. From April 1 through April 20, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear from the Waters off New Jersey Management Area.

(ii) Gear limitations and requirements—large mesh gillnet gear. From January 1 through April 30, except during April 1 through April 20, as described in paragraph (b)(1)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Waters off New Jersey Management Area, unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Waters off New Jersey Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 4,800 ft (1,463.0 m).

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.44 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel, or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 16.

(F) Tie-down system. The gillnet gear is equipped with tie-downs spaced not more than 24 ft (7.3 m) apart along the floatline, and each tie-down is not more than 48 inches (18.90 cm) in length from the point where it connects to the floatline to the point where it connects to the lead line.

(iii) Gear limitations and requirements—small mesh gillnet gear. From January 1 through April 30, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Waters off New Jersey Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Waters off New Jersey Management Area with small mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(1)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,000 ft (914.4 m) in length.

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.4 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 10.

(F) Tie-down system. Tie-downs are prohibited.

(2) Mudhole North Management Area. The Mudhole North Management Area is bounded by straight lines connecting the following points in the order stated:

Mudhole North Management Area

Point N. Lat. W. Long.
MN1 40°28.1′ 74°00.0′ (NJ shoreline)
MN2 40°30.0′ 74°00.0′
MN3 40°30.0′ 73°20.0′
MN4 40°05.0′ 73°20.0′
MN5 40°05.0′ 74°02.0′ (NJ shoreline)

(i) Closures. From February 15 through March 15, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large or small mesh gillnet gear from the Mudhole North Management Area. In addition, from April 1 through April 20, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear from the Mudhole North Management Area.

(ii) Gear limitations and requirements—large mesh gillnet gear. From January 1 through April 30, except during February 15 through March 15 and April 1 through April 20 as described in paragraph (b)(2)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Mudhole North Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole North Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,900 ft (1,188.7 m).

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.44 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 13.

(F) Tie-down system. The gillnet gear is equipped with tie-downs spaced not more than 24 ft (7.3 m) apart along the floatline, and each tie-down is not more than 48 inches (18.90 cm) in length from the point where it connects to the floatline to the point where it connects to the lead line.

(iii) Gear limitations and requirements—small mesh gillnet gear. From January 1 through April 30, except during February 15 through March 15 as described in paragraph (b)(2)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Mudhole North Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole North Management Area with small mesh gillnet gear on board unless the gear complies with the specified gear characteristics described in paragraphs (b)(2)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,000 ft (914.4 m) in length.

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.4 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 10.

(F) Tie-down system. Tie-downs are prohibited.

(3) Mudhole South Management Area. The Mudhole South Management Area is bounded by straight lines connecting the following points in the order stated:

Mudhole South Management Area

Point N. Lat. W. Long.
MS1 40°05.0′ 73°31.0′
MS2 40°05.0′ 73°00.0′
MS3 39°51.0′ 73°00.0′
MS4 39°51.0′ 73°31.0′
MS1 40°05.0′ 73°31.0′

(i) Closures. From February 1 through March 15, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large or small mesh gillnet gear in the Mudhole South Management Area. In addition, from April 1 through April 20, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear from the Mudhole South Management Area.

(ii) Gear limitations and requirements—large mesh gillnet gear. From January 1 through April 30, except during February 1 through March 15 and April 1 through April 20 as described in paragraph (b)(3)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Mudhole South Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole South Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,900 ft (1,188.7 m).

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.44 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 13.

(F) Tie-down system. The gillnet gear is equipped with tie-downs spaced not more than 24 ft (7.3 m) apart along the floatline, and each tie-down is not more than 48 inches (18.90 cm) in length from the point where it connects to the floatline to the point where it connects to the lead line.

(iii) Gear limitations and requirements—small mesh gillnet gear. From January 1 through April 30 of each year, except during February 1 through March 15 as described in paragraph (b)(3)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Mudhole South Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Mudhole South Management Area with small mesh gillnet gear on board unless the gear complies with the specified gear characteristics described in paragraphs (b)(3)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,000 ft (914.4 m) in length.

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.4 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 10.

(F) Tie-down system. Tie-downs are prohibited.

(4) Southern Mid-Atlantic Management Area. The Southern Mid-Atlantic Management Area is bounded by straight lines connecting the following points in the order stated:

Southern Mid-Atlantic Management Area

Point N. Lat. W. Long.
SMA1 38°47.0′ 75°05.0′ (DE shoreline)
SMA2 38°47.0′ 72°30.0′
SMA3 33°51.1′ 72°30.0′
SMA4 33°51.1′ 78°32.5′ (NC/SC border)

(i) Closures. From February 15 through March 15, it is prohibited to fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear from the Southern Mid-Atlantic Management Area.

(ii) Gear limitations and requirements—large mesh gillnet gear. From February 1 through April 30, except during February 15 through March 15 as described in paragraph (b)(4)(i) of this section, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any large mesh gillnet gear in the Southern Mid-Atlantic Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(ii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Southern Mid-Atlantic Management Area with large mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(ii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is not more than 3,900 ft (1,188.7 m) in length.

(B) Twine size. The twine is at least 0.035 inches (0.90 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.4 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 80.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 13.

(F) Tie-down system. The gillnet gear is equipped with tie-downs spaced not more than 24 ft (7.3 m) apart along the floatline, and each tie-down is not more than 48 inches (18.90 cm) in length from the point where it connects to the floatline to the point where it connects to the lead line.

(iii) Gear limitations and requirements—small mesh gillnet gear. From February 1 through April 30, no person may fish with, set, haul back, possess on board a vessel unless stowed in accordance with § 229.2, or fail to remove any small mesh gillnet gear in the Southern Mid-Atlantic Management Area unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(iii)(A) through (F) of this section. During this period, no vessel may enter or remain in the Southern Mid-Atlantic Management Area with small mesh gillnet gear on board, unless the gear complies with the specified gear characteristics described in paragraphs (b)(4)(iii)(A) through (F) of this section, or is stowed in accordance with § 229.2. In order to comply with these specified gear characteristics, the gear must have all the following characteristics:

(A) Floatline length. The floatline is no longer than 2,118 ft (645.6 m).

(B) Twine size. The twine is at least 0.031 inches (0.81 mm) in diameter.

(C) Size of nets. Individual nets or net panels are not more than 300 ft (91.4 m or 50 fathoms) in length.

(D) Number of nets. The total number of individual nets or net panels for a vessel, including all nets on board the vessel, hauled by the vessel or deployed by the vessel, does not exceed 45.

(E) Number of nets per string. The total number of nets or net panels in a net string does not exceed 7.

(F) Tie-down system. Tie-downs are prohibited.

(c) Research permits. An exemption to the requirements set forth in this section may be acquired for the purposes of conducting scientific or gear research within the restricted areas described in this section. A scientific research permit must be acquired through NMFS' existing permit application process, administered by NMFS.

(d) Other special measures. The Assistant Administrator may revise the requirements of this section through notification published in the Federal Register if NMFS determines that the boundary or timing of a closed area is inappropriate, or that gear modifications are not reducing bycatch to below the stock's PBR level.

[75 FR 7399, Feb. 19, 2010]