NMNEHC determination.

NMNEHC determination. Use one of the following methods to determine NMNEHC concentration, xNMNEHC:
(1) Calculate xNMNEHC based on the test fuel's ethane content as follows:
(i) If the content of your test fuel contains less than 0.010 mol/mol of ethane, you may omit the calculation of NMNEHC concentration and calculate the mass of NMNEHC as described in § 1065.650(c)(6)(i).
(ii) If the content of your fuel test contains at least 0.010 mol/mol of C2H6, you may omit the calculation of NMNEHC concentration and calculate the mass of NMNEHC as described in § 1065.650(c)(6)(ii).
(2) For a GC-FID, NMC FID, or FTIR, calculate xNMNEHC using the THC analyzer's CH4 response factor, RFCH4[THC-FID], and C2H6 response factor, RFC2H6[THC-FID], from § 1065.360, the initial contamination and dry-to-wet corrected THC concentration, xTHC[THC-FID]cor, as determined in paragraph (a) of this section, the dry-to-wet corrected CH4 concentration, xCH4, as determined in paragraph (d) of this section, and the dry-to-wet corrected C2H6 concentration, xC2H6, as determined in paragraph (e) of this section as follows:
(1) Calculate xNMNEHC based on the test fuel's ethane content as follows:
(i) If the content of your test fuel contains less than 0.010 mol/mol of ethane, you may omit the calculation of NMNEHC concentration and calculate the mass of NMNEHC as described in § 1065.650(c)(6)(i).
(ii) If the content of your fuel test contains at least 0.010 mol/mol of C2H6, you may omit the calculation of NMNEHC concentration and calculate the mass of NMNEHC as described in § 1065.650(c)(6)(ii).
(2) For a GC-FID, NMC FID, or FTIR, calculate xNMNEHC using the THC analyzer's CH4 response factor, RFCH4[THC-FID], and C2H6 response factor, RFC2H6[THC-FID], from § 1065.360, the initial contamination and dry-to-wet corrected THC concentration, xTHC[THC-FID]cor, as determined in paragraph (a) of this section, the dry-to-wet corrected CH4 concentration, xCH4, as determined in paragraph (d) of this section, and the dry-to-wet corrected C2H6 concentration, xC2H6, as determined in paragraph (e) of this section as follows:

Source

40 CFR § 1065.660


Scoping language

None
Is this correct? or