Intangible assets
Intangible assets -
(1) In general. To the extent that an intangible asset, including an intangible asset established under generally accepted accounting principles (GAAP) as a result of an acquisition of real property or an interest in real property, derives its value from real property or an interest in real property, is inseparable from that real property or interest in real property, and does not produce or contribute to the production of income other than consideration for the use or occupancy of space, the intangible asset is real property or an interest in real property.
(2) Licenses and permits. A license, permit, or other similar right that is solely for the use, enjoyment, or occupation of land or an inherently permanent structure and that is in the nature of a leasehold or easement generally is an interest in real property. A license or permit to engage in or operate a business is not real property or an interest in real property if the license or permit produces or contributes to the production of income other than consideration for the use or occupancy of space.
(g) Examples. The following examples demonstrate the rules of this section. Examples 1 and 2 illustrate the definition of land as provided in paragraph (c) of this section. Examples 3 through 10 illustrate the definition of improvements to land as provided in paragraph (d) of this section. Finally, Examples 11 through 13 illustrate whether certain intangible assets are real property or interests in real property as provided in paragraph (f) of this section.
(ii) The sculpture is not an asset listed in paragraph (d)(2)(iii)(B) of this section, and, therefore, the sculpture is an asset that must be analyzed to determine whether it is an inherently permanent structure using the factors provided in paragraph (d)(2)(iv) of this section. The sculpture -
(A) Is permanently affixed to the building by supports embedded in the building's foundation;
(B) Is not designed to be removed and is designed to remain in place indefinitely;
(C) Would be damaged if removed and would damage the building to which it is affixed;
(D) Will remain affixed to the building after any tenant vacates the premises and will remain affixed to the building indefinitely; and
(E) Would require significant time and expense to move.
(iii) The factors described in this paragraph (g) Example 3 (ii)(A) through (E) all support the conclusion that the sculpture is an inherently permanent structure within the meaning of paragraph (d)(2) of this section and, therefore, is real property.
(ii) The bus shelters are not permanently affixed enclosed transportation stations or terminals and do not otherwise meet the definition of a building in paragraph (d)(2)(ii) of this section nor are they listed as types of other inherently permanent structures in paragraph (d)(2)(iii)(B) of this section. Therefore, the bus shelters must be analyzed to determine whether they are inherently permanent structures using the factors provided in paragraph (d)(2)(iv) of this section. The bus shelters -
(A) Are not permanently affixed to the land or an inherently permanent structure;
(B) Are designed to be removed and are not designed to remain in place indefinitely;
(C) Would not be damaged if removed and would not damage the sidewalks to which they are affixed;
(D) Will not remain affixed after the local transit authority vacates the site and will not remain affixed indefinitely; and
(E) Would not require significant time and expense to move.
(iii) The factors described in this paragraph (g) Example 4 (ii)(A) through (E) all support the conclusion that the bus shelters are not inherently permanent structures within the meaning of paragraph (d)(2) of this section. Although the bus shelters serve a passive function of sheltering, the bus shelters are not permanently affixed, which means the bus shelters are not inherently permanent structures within the meaning of paragraph (d)(2) of this section and, therefore, are not real property.
(ii) Walls and central refrigeration systems are listed as structural components in paragraph (d)(3)(ii) of this section and, therefore, are real property. The customization of the freezer walls does not affect their qualification as structural components of REIT E's Cold Storage Warehouse within the meaning of paragraph (d)(3) of this section. Therefore, the freezer walls and central refrigeration system are structural components of REIT E's Cold Storage Warehouse.
(ii) The central heating and air-conditioning system, integrated security system, fire suppression system, and humidity control system are listed as structural components in paragraph (d)(3)(ii) of this section and, therefore, are real property. The customization of these Systems does not affect the qualification of these Systems as structural components of REIT F's building within the meaning of paragraph (d)(3) of this section. Therefore, these Systems are structural components of REIT F's building.
(iii) In addition to wiring and flooring, which are listed as structural components in paragraph (d)(3)(ii) of this section and, therefore, are real property, the Electrical System and telecommunication infrastructure system include equipment used to ensure that the tenant is provided with uninterruptable, stable power and telecommunication services. The Electrical System and telecommunication infrastructure system are not listed in paragraph (d)(3)(ii) of this section, and, therefore, they must be analyzed to determine whether they are structural components of the building using the factors provided in paragraph (d)(3)(iii) of this section. The Electrical System and telecommunication infrastructure system -
(A) Are embedded within the walls and floors of the building and would be costly to remove;
(B) Are not designed to be moved and are designed specifically for the particular building of which they are a part;
(C) Would not be significantly damaged upon removal and, although removing them would damage the walls and floors in which they are embedded, their removal would not significantly damage the building;
(D) Serve a utility-like function with respect to the building;
(E) Serve the building in its passive functions of containing, sheltering, and protecting computer servers;
(F) Produce income as consideration for the use or occupancy of space within the building;
(G) Were installed during construction of the building; and
(H) Will remain in place when the tenant vacates the premises.
(iv) The factors described in this paragraph (g) Example 6 (iii)(A), (B), and (D) through (H) all support the conclusion that the Electrical System and telecommunication infrastructure system are structural components of REIT F's building within the meaning of paragraph (d)(3) of this section and, therefore, are real property. The factor described in this paragraph (g) Example 6 (iii)(C) would support a conclusion that the Electrical System and telecommunication infrastructure system are not structural components. However this factor does not outweigh the factors supporting the conclusion that the Electric System and telecommunication infrastructure system are structural components.
(ii) Depending on the needs of a new tenant, the Conventional Partition System may remain in place when a tenant vacates the premises. The Conventional Partition System is integrated into the office building and is designed and constructed to remain in areas not subject to reconfiguration or expansion. The Conventional Partition System can be removed only by demolition, and, once removed, neither the Conventional Partition System nor its components can be reused. Removal of the Conventional Partition System causes substantial damage to the Conventional Partition System itself but does not cause substantial damage to the building.
(iii) Modular Partition Systems are typically removed when a tenant vacates the premises. Modular Partition Systems are not designed or constructed to remain permanently in place. Modular Partition Systems are designed and constructed to be movable. Each Modular Partition System can be readily removed, remains in substantially the same condition as before, and can be reused. Removal of a Modular Partition System does not cause any substantial damage to the Modular Partition System itself or to the building. The Modular Partition System may be moved to accommodate the reconfigurations of the interior space within the office building for various tenants that occupy the building.
(iv) The Conventional Partition System is comprised of walls that are integrated into an inherently permanent structure, and thus are listed as structural components in paragraph (d)(3)(ii) of this section. The Conventional Partition System, therefore, is real property.
(v) The Modular Partition System is not integrated into the building and, therefore, is not listed in paragraph (d)(3)(ii) of this section. Thus, the Modular Partition System must be analyzed to determine whether it is a structural component using the factors provided in paragraph (d)(3)(iii) of this section. The Modular Partition System -
(A) Is installed and removed quickly and with little expense;
(B) Is designed to be moved and is not designed specifically for the particular building of which it is a part;
(C) Is not damaged, and the building is not damaged, upon its removal;
(D) Does not serve a utility-like function with respect to the building;
(E) Serves the building in its passive functions of containing and protecting the tenants' assets;
(F) Produces income only as consideration for the use or occupancy of space within the building;
(G) Was not installed during construction of the building; and
(H) Will not remain in place when a tenant vacates the premises.
(vi) The factors described in this paragraph (g) Example 7 (v)(A) through (D), (G) and (H) all support the conclusion that the Modular Partition System is not a structural component of REIT G's building within the meaning of paragraph (d)(3) of this section and, therefore, is not real property. The factors described in this paragraph (g) Example 7 (v)(E) and (F) would support a conclusion that the Modular Partition System is a structural component. These factors, however, do not outweigh the factors supporting the conclusion that the Modular Partition System is not a structural component.
(ii) REIT H's PV Modules, mounts, and exit wire are each separately identifiable items. Separation from a mount does not affect the ability of a PV Module to convert photons to electricity. Separation from the equipment to which it is attached does not affect the ability of the exit wire to transmit electricity to the electrical power grid. The types of PV Modules and exit wire that REIT H owns are each customarily sold or acquired as single units. Removal of the PV Modules from the mounts that support them does not damage the function of the mounts as support structures and removal is not costly. The PV Modules serve the active function of converting photons to electricity. Disconnecting the exit wire from the equipment to which it is attached does not damage the function of that equipment, and the disconnection is not costly. The PV Modules, mounts, and exit wire are each distinct assets within the meaning of paragraph (e) of this section.
(iii) The land is real property as defined in paragraph (c) of this section.
(iv) The mounts are designed and constructed to remain in place indefinitely, and they have a passive function of supporting the PV Modules. The mounts are not listed in paragraph (d)(2)(iii)(B) of this section, and, therefore, the mounts are assets that must be analyzed to determine whether they are inherently permanent structures using the factors provided in paragraph (d)(2)(iv) of this section. The mounts -
(A) Are permanently affixed to the land through the concrete foundations or molded concrete anchors (which are part of the mounts);
(B) Are not designed to be removed and are designed to remain in place indefinitely;
(C) Would be damaged if removed;
(D) Will remain affixed to the land after the tenant vacates the premises and will remain affixed to the land indefinitely; and
(E) Would require significant time and expense to move.
(v) The factors described in this paragraph (g) Example 8 (iv)(A) through (E) all support the conclusion that the mounts are inherently permanent structures within the meaning of paragraph (d)(2) of this section and, therefore, are real property.
(vi) The PV Modules convert solar photons into electricity that is transmitted through an electrical power grid for sale to third parties. The conversion is an active function. Thus, the PV Modules are items of machinery or equipment and therefore are not inherently permanent structures within the meaning of paragraph (d)(2) of this section and, so, are not real property. The PV Modules do not serve the mounts in their passive function of providing support; instead, the PV Modules produce electricity for sale to third parties, which is income other than consideration for the use or occupancy of space. Thus, the PV Modules are not structural components of REIT H's mounts within the meaning of paragraph (d)(3) of this section and, therefore, are not real property.
(vii) The exit wire is buried under the ground and transmits the electricity produced by the PV Modules to the electrical power grid. The exit wire was installed during construction of the solar energy site and is designed to remain permanently in place. The exit wire is permanently affixed and is a transmission line, which is listed as an inherently permanent structure in paragraph (d)(2)(iii)(B) of this section. Therefore, the exit wire is real property.
(ii) With the exception of the occasional transfers of excess electricity to a utility company, the Solar Energy Site Assets serve the office building to which they are adjacent, and, therefore, the Solar Energy Site Assets are analyzed to determine whether they are a structural component using the factors provided in paragraph (d)(3)(iii) of this section. The Solar Energy Site Assets -
(A) Are expensive and time consuming to install and remove;
(B) Were designed with the size and specifications needed to serve only the office building;
(C) Will be damaged, but will not cause damage to the office building, upon removal;
(D) Serve a utility-like function with respect to the office building;
(E) Serve the office building in its passive functions of containing, sheltering, and protecting the tenant and the tenant's assets;
(F) Produce income from consideration for the use or occupancy of space within the office building;
(G) Were not installed during construction of the office building; and
(H) Will remain in place when the tenant vacates the premises.
(iii) The factors described in this paragraph (g) Example 9 (ii)(A) through (C) (in part), (ii)(D) through (F), and (ii)(H) all support the conclusion that the Solar Energy Site Assets are a structural component of REIT I's office building within the meaning of paragraph (d)(3) of this section and, therefore, are real property. The factors described in this paragraph (g) Example 9 (ii)(C) (in part) and (ii)(G) would support a conclusion that the Solar Energy Site Assets are not a structural component, but these factors do not outweigh the factors supporting the conclusion that the Solar Energy Site Assets are a structural component.
(iv) The result in this Example 9 would not change if, instead of the Solar Energy Site Assets, solar shingles were used as the roof of REIT I's office building. Solar shingles are roofing shingles like those commonly used for residential housing, except that they contain built-in PV modules. The solar shingle installation was specifically designed and constructed to serve only the needs of REIT I's office building, and the solar shingles were installed as a structural component to provide solar energy to REIT I's office building (although REIT I's tenant occasionally transfers excess electricity produced by the solar shingles to a utility company). The analysis of the application of the factors provided in paragraph (d)(3)(ii) of this section would be similar to the analysis of the application of the factors to the Solar Energy Site Assets in this paragraph (g) Example 9 (ii) and (iii).
(ii) The pipelines are permanently affixed and are listed as other inherently permanent structures in paragraph (d)(2)(iii)(B) of this section. Therefore, the pipelines are real property.
(iii) Isolation valves and vents are placed at regular intervals along the pipelines to isolate and evacuate sections of the pipelines in case there is need for a shut-down or maintenance of the pipelines. Pressure control and relief valves are installed at regular intervals along the pipelines to provide overpressure protection. The isolation valves and vents and pressure control and relief valves are not listed in paragraph (d)(3)(ii) and, therefore, must be analyzed to determine whether they are structural components using the factors provided in paragraph (d)(3)(iii) of this section. The isolation valves and vents and pressure control and relief valves -
(A) Are time consuming and expensive to install and remove from the pipelines;
(B) Are designed specifically for the particular pipelines for which they are a part;
(C) Will sustain damage and will damage the pipelines if removed;
(D) Do not serve a utility-like function with respect to the pipelines;
(E) Serve the pipelines in their passive function of providing a conduit for natural gas;
(F) Produce income only from consideration for the use or occupancy of space within the pipelines;
(G) Were installed during construction of the pipelines; and
(H) Will remain in place when the tenant vacates the premises.
(iv) The factors described in this paragraph (g) Example 10 (iii)(A) through (C) and (iii)(E) through (H) support the conclusion that the isolation valves and vents and pressure control and relief valves are structural components of REIT J's pipelines within the meaning of paragraph (d)(3) of this section and, therefore, are real property. The factor described in this paragraph (g) Example 10 (iii)(D) would support a conclusion that the isolation valves and vents and pressure control and relief valves are not structural components, but this factor does not outweigh the factors that support the conclusion that the isolation valves and vents and pressure control and relief valves are structural components.
(v) Meters are used to measure the natural gas passing into or out of the pipeline transmission system for purposes of determining the end users' consumption. Over long distances, pressure is lost due to friction in the pipeline transmission system. Compressors are required to add pressure to transport natural gas through the entirety of the pipeline transmission system. The meters and compressors do not serve the pipelines in their passive function of providing a conduit for the natural gas, and are used in connection with the production of income from the sale and transportation of natural gas, rather than as consideration for the use or occupancy of space within the pipelines. The meters and compressors are not structural components within the meaning of paragraph (d)(3) of this section and, therefore, are not real property.