Major source

Major source means any stationary source (or any group of stationary sources that are located on one or more continuous or adjacent properties, and are under common control of the same person (or persons under common control)) belonging to a single major industrial grouping and that are described in paragraph , (2), or (3) of this definition. For the purposes of defining major source, a stationary source or group of stationary sources shall be considered part of a single industrial grouping if all of the pollutant emitting activities at such source or group of sources on contiguous or adjacent properties belong to the same Major Group (i.e., all have the same two-digit code) as described in the Standard Industrial Classification Manual, 1987. State programs may adopt the following provision: For onshore activities belonging to Standard Industrial Classification (SIC) Major Group 13: Oil and Gas Extraction, pollutant emitting activities shall be considered adjacent if they are located on the same surface site; or if they are located on surface sites that are located within 1/4 mile of one another (measured from the center of the equipment on the surface site) and they share equipment. Shared equipment includes, but is not limited to, produced fluids storage tanks, phase separators, natural gas dehydrators or emissions control devices. Surface site, as used in the introductory text of this definition, has the same meaning as in 40 CFR 63.761.

Source

40 CFR § 70.2


Scoping language

The following definitions apply to part 70. Except as specifically provided in this section, terms used in this part retain the meaning accorded them under the applicable requirements of the Act.

Is this correct? or