Mercury emissions.
Mercury emissions. For any combination of copper concentrate dryers, smelting vessel, copper converter department, slag cleaning vessel and anode refining department subject to a mercury emission limit in 63.1444, you have demonstrated initial compliance if you meet the conditions in paragraphs (j)(1) through (3) of this section.
(1) The sum of the mercury emissions (lb/hr) from the affected sources measured according to the performance test procedures in § 63.1450(d), did not exceed the applicable emission limit.
(2) Established a site-specific operating limit for a parameter based on values measured during the performance test you conduct to demonstrate initial compliance with this paragraph (j) and have prepared written documentation according to the requirements in § 63.1450(d)(3)(iv).
(3) You have submitted a notification of compliance status according to the requirements in § 63.1454(e) and performance test results according to the requirements in § 63.1455(e).