Sweetening unit affected facility.

Sweetening unit affected facility. For each sweetening unit affected facility, you must demonstrate continuous compliance with the requirements of 60.5405b(b) according to paragraphs (k)(1) through (10) of this section.
(1) You must determine the minimum required continuous reduction efficiency of SO2 emissions (Zc) as required by § 60.5406b(b).
(2) You must determine the emission reduction efficiency (R) achieved by your sulfur reduction technology using the procedures in § 60.5406b(c)(1) through (c)(4).
(3) You must demonstrate compliance with the standard at § 60.5405b(b) by comparing the minimum required sulfur dioxide emission reduction efficiency (Zc) to the emission reduction efficiency achieved by the sulfur recovery technology (R), where R must be greater than or equal to Zc.
(4) You must calibrate, maintain, and operate monitoring devices or perform measurements to determine the accumulation of sulfur product, the H2S concentration, the average acid gas flow rate, and the sulfur feed rate in accordance with § 60.5407b(a).
(5) You must determine the required SO2 emissions reduction efficiency each 24-hour period in accordance with § 60.5407b(a), § 60.5407b(d), and § 60.5407b(e), as applicable.
(6) You must calibrate, maintain, and operate monitoring devices and continuous emission monitors in accordance with § 60.5407b(b), (f), and (g), if you use an oxidation control system or a reduction control system followed by an incineration device.
(7) You must continuously operate the incineration device, if you use an oxidation control system or a reduction control system followed by an incineration device.
(8) You must calibrate, maintain, and operate a continuous monitoring system to measure the emission rate of reduced sulfur compounds in accordance with § 60.5407b(c), (f), and (g), if you use a reduction control system not followed by an incineration device.
(9) You must submit the reports as required by § 60.5423b(d).
(10) You must maintain the records as required by § 60.5423b(a), (e), and (f), as applicable.

Source

40 CFR § 60.5415b


Scoping language

None
Is this correct? or