used to project fastening devices

Cartridges, small arms, Cartridges, power device (used to project fastening devices), Cartridges for tools, blank, and Cases, cartridge empty with primer that may be shipped as a limited quantity or ORM-D material are as follows:
(A) Ammunition for rifle, pistol or shotgun;
(B) Ammunition with inert projectiles or blank ammunition;
(C) Ammunition having no tear gas, incendiary, or detonating explosive projectiles;
(D) Ammunition not exceeding 12.7 mm (50 caliber or 0.5 inch) for rifle or pistol, cartridges or 8 gauge for shotshells;
(E) Cartridges for tools, blank; and
(F) Cases, cartridge, empty with primer.
(G) Cartridges, power device (used to project fastening devices).
(2) Packaging for Cartridges, small arms, Cartridges for tools, blank, Cases, cartridge empty with primer, and eligible Cartridges, power device as limited quantity or ORM-D material must be as follows:
(A) Ammunition for rifle, pistol or shotgun;
(B) Ammunition with inert projectiles or blank ammunition;
(C) Ammunition having no tear gas, incendiary, or detonating explosive projectiles;
(D) Ammunition not exceeding 12.7 mm (50 caliber or 0.5 inch) for rifle or pistol, cartridges or 8 gauge for shotshells;
(E) Cartridges for tools, blank; and
(F) Cases, cartridge, empty with primer.
(G) Cartridges, power device (used to project fastening devices).
(2) Packaging for Cartridges, small arms, Cartridges for tools, blank, Cases, cartridge empty with primer, and eligible Cartridges, power device as limited quantity or ORM-D material must be as follows:
(i) Ammunition must be packed in inside boxes, or in partitions that fit snugly in the outside packaging, or in metal clips;
(ii) Primers must be protected from accidental initiation;
(iii) Inside boxes, partitions or metal clips must be packed in securely-closed strong outside packagings;
(iv) Maximum gross weight is limited to 30 kg (66 pounds) per package; and
(v) Cartridges for tools, blank, Cartridges, power devices which are used to project fastening devices, Cases, cartridge, empty with primer, and 22 caliber rim-fire cartridges may be packaged loose in strong outside packagings.
(c) [Reserved]
(d) Reverse logistics. Hazardous materials meeting the definition of “reverse logistics” under § 171.8 of this subchapter and in compliance with paragraph (b) of this section may be offered for transport and transported in highway transportation in accordance with § 173.157.
(e) [Reserved]
(f) Detonators containing no more than 1 g explosive (excluding ignition and delay charges) that are electric blasting caps with leg wires 4 feet long or longer, delay connectors in plastic sheaths, or blasting caps with empty plastic tubing 12 feet long or longer may be packed as follows in which case they are excepted from the packaging requirements of § 173.62:
(1) No more than 50 detonators in one inner packaging;
(2) IME Standard 22 container (IBR, see § 171.7 of this subchapter) or compartment is used as the outer packaging;
(3) No more than 1000 detonators in one outer packaging; and
(4) No material may be loaded on top of the IME Standard 22 container and no material may be loaded against the outside door of the IME Standard 22 compartment.
(g) Detonators that are classed as 1.4B or 1.4S and contain no more than 1 g of explosive (excluding ignition and delay charges) may be packed as follows in which case they are excepted from the packaging requirements of § 173.62:
(1) No more than 50 detonators in one inner packaging;
(2) IME Standard 22 container is used as the outer packaging;
(3) No more than 1000 detonators in one outer packaging; and
(4) Each inner packaging is marked “l.4B Detonators” or “1.4S Detonators”, as appropriate.

Source

49 CFR § 173.63


Scoping language

None
Is this correct? or