20200414, 12:44  #23 
"Ed Hall"
Dec 2009
Adirondack Mtns
7637_{8} Posts 
After too many restarts to kick the server into issuing WUs (I really thought I was using an earlier version that never did this before.), I'm closing in on the target relations.
@Curtis, What was the suggested density for my msieve matrix? 
20200414, 16:22  #24 
"Curtis"
Feb 2005
Riverside, CA
2^{7}×3×13 Posts 
For C175ish, and your ratio of sieving to matrix resources, I'd go for 116 or 120.
For a normal person (say, using one or two machines), I'd go for 105110. 
20200414, 16:34  #25  
"Curtis"
Feb 2005
Riverside, CA
1380_{16} Posts 
Quote:
1.85 * 32 = 59.2, so I used 60. With that lambda setting, only cofactors that split into one factor smaller than 27.2 (and thus the other bigger than 32) bits are wasted effort. 2^27.2 is 154M, so with lim set to that value there is no wasted cofactorization effort every split yields a relation. This also shows you how I compute lambda: If lim1 is raised to 180M, that's 27.43 bits. 27.43/32 is 0.857, so lambda1 should be raised to at least 1.86, since no cofactor can split into a prime smaller than lim. Adding 0.01 raises yield and doesn't seem to require too many more relations, so perhaps try 1.87 for lambda1, and 1.85 or 1.855 for lambda0 if you use 32/32 and 140/180M for lim's. 

20200414, 17:01  #26  
Apr 2020
111101101_{2} Posts 
Done a few more filtering runs for the first c177.
250M relations gave: Code:
matrix is 13947683 x 13947907 (5100.4 MB) with weight 1347451665 (96.61/col) Code:
matrix is 14494203 x 14494428 (5303.1 MB) with weight 1399857738 (96.58/col) What's optimal will depend heavily on both the individual setup and whether the aim is to be able to factor a single c17x as quickly as possible (for which more relations is better for the faster matrix) or to factor lots in succession, as then the matrix can be left running while the next one sieves. Quote:


20200416, 14:06  #27 
"Ed Hall"
Dec 2009
Adirondack Mtns
3999_{10} Posts 
@Curtis:
Sieving is complete and I am now trying to run msieve for the LA. Here is a portion of the log: Code:
PID15335 20200416 09:03. . . Debug:Lattice Sieving: stderr is: b"# redoing q=93240031, rho=4478888 because 1s buckets are full\n# Fullest level1s bucket #1090, wrote 3135/3072\n# Average J=15601 for 558 specialq's, max bucket fill bkmult 1,1s:1.07153\n# Discarded 0 specialq's out of 558 pushed\n# Wasted cpu time due to 1 bkmult adjustments: 8.39\n# Total cpu time 8830.48s [norm 7.92+19.5, sieving 8481.8 (4614.5 + 259.7 + 3607.7), factor 321.2 (321.0 + 0.2)] (not incl wasted time)\n# Total elapsed time 1299.00s, per specialq 2.32796s, per relation 0.0650575s\n# PeakMemusage (MB) = 3094 \n# Total 19967 reports [0.442s/r, 35.8r/sq] in 1.3e+03 elapsed s [679.8% CPU]\n" Debug:Lattice Sieving: Newly arrived stats: {'stats_avg_J': '15601.0 558', 'stats_total_time': '1299.0', 'stats_total_cpu_time': '8830.48', 'stats_max_bucket_fill': '1,1s:1.07153'} Debug:Lattice Sieving: Combined stats: {'stats_avg_J': '16023.856554636326 5345903', 'stats_total_time': '21977179.10000008', 'stats_total_cpu_time': '93963886.25000069', 'stats_max_bucket_fill': '1.0,1s:1.416720'} Info:Lattice Sieving: Found 19967 relations in '/tmp/cadofactor/c175.upload/c175.9324000093250000.ue6ki7i9.gz', total is now 270013333/270000000 . . . Debug:Lattice Sieving: Exit SievingTask.run(sieving) Info:Lattice Sieving: Aggregate statistics: Info:Lattice Sieving: Total number of relations: 270013333 Info:Lattice Sieving: Average J: 16023.9 for 5345903 specialq, max bucket fill bkmult 1.0,1s:1.416720 Info:Lattice Sieving: Total time: 2.19772e+07s Info:Filtering  Duplicate Removal, splitting pass: Stopping at duplicates1 
20200416, 16:04  #28 
"Ed Hall"
Dec 2009
Adirondack Mtns
3999_{10} Posts 
t_d=120 didn't build:
Code:
Thu Apr 16 10:03:48 2020 Thu Apr 16 10:03:48 2020 Thu Apr 16 10:03:48 2020 Msieve v. 1.54 (SVN 1018) Thu Apr 16 10:03:48 2020 random seeds: f85ef96f 7298ed39 Thu Apr 16 10:03:48 2020 factoring 76552370139504036674890813564032281493867343366619508594816489005834882856199128873928842970710045044111574726594936894404957063604759585302342441093226844531070349677623657609 (176 digits) Thu Apr 16 10:03:49 2020 searching for 15digit factors Thu Apr 16 10:03:50 2020 commencing number field sieve (176digit input) Thu Apr 16 10:03:50 2020 R0: 10749206376460432970317818596117873 Thu Apr 16 10:03:50 2020 R1: 4023609444811856477743 Thu Apr 16 10:03:50 2020 A0: 91389778824609164214454779424151524400880 Thu Apr 16 10:03:50 2020 A1: 16573333756774205759678902993899502 Thu Apr 16 10:03:50 2020 A2: 8753197000583595457254903663 Thu Apr 16 10:03:50 2020 A3: 1186820920867031701728 Thu Apr 16 10:03:50 2020 A4: 77519198521772 Thu Apr 16 10:03:50 2020 A5: 533400 Thu Apr 16 10:03:50 2020 skew 1.00, size 3.822e17, alpha 6.645, combined = 8.280e16 rroots = 5 Thu Apr 16 10:03:50 2020 Thu Apr 16 10:03:50 2020 commencing relation filtering Thu Apr 16 10:03:50 2020 setting target matrix density to 120.0 Thu Apr 16 10:03:50 2020 estimated available RAM is 15926.6 MB Thu Apr 16 10:03:50 2020 commencing duplicate removal, pass 1 Thu Apr 16 10:03:51 2020 error 1 reading relation 189590 . . . Thu Apr 16 10:38:29 2020 error 1 reading relation 267865222 Thu Apr 16 10:38:58 2020 found 88770665 hash collisions in 271761268 relations Thu Apr 16 10:39:31 2020 added 122298 free relations Thu Apr 16 10:39:31 2020 commencing duplicate removal, pass 2 Thu Apr 16 10:46:02 2020 found 125086447 duplicates and 146797119 unique relations Thu Apr 16 10:46:02 2020 memory use: 1449.5 MB Thu Apr 16 10:46:03 2020 reading ideals above 139919360 Thu Apr 16 10:46:03 2020 commencing singleton removal, initial pass Thu Apr 16 11:01:31 2020 memory use: 3012.0 MB Thu Apr 16 11:01:31 2020 reading all ideals from disk Thu Apr 16 11:01:49 2020 memory use: 2357.7 MB Thu Apr 16 11:01:53 2020 commencing inmemory singleton removal Thu Apr 16 11:01:57 2020 begin with 146797119 relations and 142617272 unique ideals Thu Apr 16 11:02:39 2020 reduce to 56506171 relations and 38799310 ideals in 18 passes Thu Apr 16 11:02:39 2020 max relations containing the same ideal: 21 Thu Apr 16 11:02:42 2020 reading ideals above 720000 Thu Apr 16 11:02:42 2020 commencing singleton removal, initial pass Thu Apr 16 11:13:13 2020 memory use: 1506.0 MB Thu Apr 16 11:13:13 2020 reading all ideals from disk Thu Apr 16 11:13:30 2020 memory use: 2241.3 MB Thu Apr 16 11:13:36 2020 keeping 54258109 ideals with weight <= 200, target excess is 313347 Thu Apr 16 11:13:42 2020 commencing inmemory singleton removal Thu Apr 16 11:13:47 2020 begin with 56506171 relations and 54258109 unique ideals Thu Apr 16 11:14:50 2020 reduce to 56030216 relations and 53781539 ideals in 13 passes Thu Apr 16 11:14:50 2020 max relations containing the same ideal: 200 Thu Apr 16 11:15:17 2020 removing 3684525 relations and 3284525 ideals in 400000 cliques Thu Apr 16 11:15:18 2020 commencing inmemory singleton removal Thu Apr 16 11:15:23 2020 begin with 52345691 relations and 53781539 unique ideals Thu Apr 16 11:16:08 2020 reduce to 52174610 relations and 50324306 ideals in 10 passes Thu Apr 16 11:16:08 2020 max relations containing the same ideal: 197 Thu Apr 16 11:16:33 2020 removing 2772195 relations and 2372195 ideals in 400000 cliques Thu Apr 16 11:16:34 2020 commencing inmemory singleton removal Thu Apr 16 11:16:38 2020 begin with 49402415 relations and 50324306 unique ideals Thu Apr 16 11:17:17 2020 reduce to 49291975 relations and 47840809 ideals in 9 passes Thu Apr 16 11:17:17 2020 max relations containing the same ideal: 190 Thu Apr 16 11:17:40 2020 removing 2488158 relations and 2088158 ideals in 400000 cliques Thu Apr 16 11:17:41 2020 commencing inmemory singleton removal Thu Apr 16 11:17:45 2020 begin with 46803817 relations and 47840809 unique ideals Thu Apr 16 11:18:22 2020 reduce to 46708746 relations and 45656840 ideals in 9 passes Thu Apr 16 11:18:22 2020 max relations containing the same ideal: 185 Thu Apr 16 11:18:43 2020 removing 2334687 relations and 1934687 ideals in 400000 cliques Thu Apr 16 11:18:44 2020 commencing inmemory singleton removal Thu Apr 16 11:18:49 2020 begin with 44374059 relations and 45656840 unique ideals Thu Apr 16 11:19:19 2020 reduce to 44283467 relations and 43630836 ideals in 8 passes Thu Apr 16 11:19:19 2020 max relations containing the same ideal: 182 Thu Apr 16 11:19:40 2020 removing 1701806 relations and 1412658 ideals in 289148 cliques Thu Apr 16 11:19:41 2020 commencing inmemory singleton removal Thu Apr 16 11:19:44 2020 begin with 42581661 relations and 43630836 unique ideals Thu Apr 16 11:20:14 2020 reduce to 42532132 relations and 42168363 ideals in 8 passes Thu Apr 16 11:20:14 2020 max relations containing the same ideal: 176 Thu Apr 16 11:20:41 2020 relations with 0 large ideals: 1038 Thu Apr 16 11:20:41 2020 relations with 1 large ideals: 1550 Thu Apr 16 11:20:41 2020 relations with 2 large ideals: 21593 Thu Apr 16 11:20:41 2020 relations with 3 large ideals: 198057 Thu Apr 16 11:20:41 2020 relations with 4 large ideals: 1072004 Thu Apr 16 11:20:41 2020 relations with 5 large ideals: 3623143 Thu Apr 16 11:20:41 2020 relations with 6 large ideals: 7969344 Thu Apr 16 11:20:41 2020 relations with 7+ large ideals: 29645403 Thu Apr 16 11:20:41 2020 commencing 2way merge Thu Apr 16 11:21:10 2020 reduce to 25695897 relation sets and 25332128 unique ideals Thu Apr 16 11:21:10 2020 commencing full merge Thu Apr 16 11:40:43 2020 memory use: 1167.7 MB Thu Apr 16 11:40:44 2020 found 84937 cycles, need 5310047 Thu Apr 16 11:40:44 2020 too few cycles, matrix probably cannot build 
20200416, 16:39  #29 
"Curtis"
Feb 2005
Riverside, CA
2^{7}·3·13 Posts 
The C177 from above had 156M unique relations and built a nice matrix. You have 146M, so your poly happened to generate more duplicate relations. I'd aim for that 155M unique number since it worked well on the C177; your duplicate rate is quite high, so something like 20M more raw relations might get you there. 25M wouldn't be bad.

20200416, 16:47  #30  
"Curtis"
Feb 2005
Riverside, CA
2^{7}×3×13 Posts 
Quote:
Comparison points, using my own params: C155, 2.3M threadsec on 12 threads of a 6core haswell 3.3ghz C186, 100M threadsec on many threads of IvyB Xeon2.6ghz. RichD did a C150 in 0.7M coresec of notHT i5 (I forget what speed). Only the C150 params had multiple test/refine cycles, the rest were firstguesses like this C175. 

20200416, 17:17  #31  
"Ed Hall"
Dec 2009
Adirondack Mtns
3·31·43 Posts 
Quote:


20200416, 17:30  #32 
Apr 2020
17×29 Posts 
Isn't that clientseconds, rather than threadseconds? Just above it in the log that Ed posted was:
Code:
Debug:Lattice Sieving: Combined stats: {'stats_avg_J': '16023.856554636326 5345903', 'stats_total_time': '21977179.10000008', 'stats_total_cpu_time': '93963886.25000069', 'stats_max_bucket_fill': '1.0,1s:1.416720'} When a CADO job finishes completely (including postprocessing), the time given for the whole factorization appears to use 'stats_total_cpu_time' instead, as it should. Edit: for comparison, the final such line from my c177 before I ran filtering: Code:
Debug:Lattice Sieving: Combined stats: {'stats_total_cpu_time': '67364457.04999968', 'stats_total_time': '34176880.70000007', 'stats_max_bucket_fill': '1.0,1s:1.081950', 'stats_avg_J': '15365.574654104747 10509757'} Last fiddled with by charybdis on 20200416 at 17:39 
20200416, 18:13  #33 
"Curtis"
Feb 2005
Riverside, CA
4992_{10} Posts 
Hrmmmmm..... I've been using the screen display "total sieving time" that pops up at the end of the sieve phase, and matches the endoffactorization summary printed to screen. I can't say I delve into the log file hardly ever.
Ed's timing falls into my curvefitting of time vs input size from the other jobs I listed, so I am quite confused. I appreciate you pointing out the inconsistency in the log report! 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Integers congruent to last two decimal digits mod 23  enzocreti  enzocreti  1  20200303 18:38 
Twin Primes with 128 Decimal Digits  tuckerkao  Miscellaneous Math  2  20200216 06:23 
Playing with decimal representation  Nick  Puzzles  9  20130213 17:17 
Decimal Value of Mersenne Prime  vsuite  GPU Computing  11  20110202 04:47 
Decimal Places  Corbyguy  Software  3  20080609 18:09 