Annuities.
Annuities.
(A) If the interest to be valued is the right of a person to receive an annuity that is payable at the end of each year for a term of years or for the life of one individual, the present value of the interest is computed by multiplying the aggregate amount payable annually by the appropriate annuity factor (that corresponds to the applicable section 7520 interest rate and annuity period). The appropriate annuity factor for an annuity payable for a term of years is computed by subtracting from 1.000000 the factor for an ordinary remainder interest following the same term certain that is determined under the formula in paragraph (d)(2)(ii)(A) of this section and then dividing the result by the applicable section 7520 interest rate expressed to at least four decimal places. For the convenience of taxpayers, actuarial factors have been computed by the IRS and appear in the “Annuity” column of Table B which can be found on the IRS website at https://www.irs.gov/retirement-plans/actuarial-tables (or a corresponding URL as may be updated from time to time). The appropriate annuity factor for an annuity payable for the life of one individual is computed by subtracting from 1.00000 the factor for an ordinary remainder interest following the life of the same individual that is determined under the formula in paragraph (d)(2)(ii)(B) of this section and then dividing the result by the applicable section 7520 interest rate expressed to at least four decimal places. For the convenience of taxpayers, actuarial factors have been computed by the IRS and appear in the “Annuity” column of Table S. Table S (applicable when the valuation date is on or after June 1, 2023) can be found on the IRS website at https://www.irs.gov/retirement-plans/actuarial-tables. Tables B and S are referenced and explained in IRS Publication 1457, Actuarial Valuations Version 4A. See § 20.2031-7A or earlier versions of Publication 1457 for valuation of interests before June 1, 2023. For information about obtaining special factors for other situations, see paragraph (d)(4) of this section.
(B) If the annuity is payable at the end of semiannual, quarterly, monthly, or weekly periods, the product obtained by multiplying the annuity factor by the aggregate amount payable annually is then multiplied by the applicable adjustment factor at the appropriate interest rate component for payments made at the end of the specified periods. The applicable adjustment factor may be found using the formula in Figure 3 to this paragraph (d)(2)(iv)(B) and calculating the result to at least four decimal places. For the convenience of taxpayers, actuarial factors have been computed by the IRS and appear in Table K. Table K, which is referenced and explained by Publication 1457, can be found on the IRS website at https://www.irs.gov/retirement-plans/actuarial-tables. The provisions of this paragraph (d)(2)(iv)(B) are illustrated by the example in paragraph (d)(2)(iv)(B)(2) of this section.
(1) Sample factors from actuarial Tables S and K. For purposes of the example in paragraph (d)(2)(iv)(B)(2) of this section, the following factors from Tables S and K will be used:
(A) If the interest to be valued is the right of a person to receive an annuity that is payable at the end of each year for a term of years or for the life of one individual, the present value of the interest is computed by multiplying the aggregate amount payable annually by the appropriate annuity factor (that corresponds to the applicable section 7520 interest rate and annuity period). The appropriate annuity factor for an annuity payable for a term of years is computed by subtracting from 1.000000 the factor for an ordinary remainder interest following the same term certain that is determined under the formula in paragraph (d)(2)(ii)(A) of this section and then dividing the result by the applicable section 7520 interest rate expressed to at least four decimal places. For the convenience of taxpayers, actuarial factors have been computed by the IRS and appear in the “Annuity” column of Table B which can be found on the IRS website at https://www.irs.gov/retirement-plans/actuarial-tables (or a corresponding URL as may be updated from time to time). The appropriate annuity factor for an annuity payable for the life of one individual is computed by subtracting from 1.00000 the factor for an ordinary remainder interest following the life of the same individual that is determined under the formula in paragraph (d)(2)(ii)(B) of this section and then dividing the result by the applicable section 7520 interest rate expressed to at least four decimal places. For the convenience of taxpayers, actuarial factors have been computed by the IRS and appear in the “Annuity” column of Table S. Table S (applicable when the valuation date is on or after June 1, 2023) can be found on the IRS website at https://www.irs.gov/retirement-plans/actuarial-tables. Tables B and S are referenced and explained in IRS Publication 1457, Actuarial Valuations Version 4A. See § 20.2031-7A or earlier versions of Publication 1457 for valuation of interests before June 1, 2023. For information about obtaining special factors for other situations, see paragraph (d)(4) of this section.
(B) If the annuity is payable at the end of semiannual, quarterly, monthly, or weekly periods, the product obtained by multiplying the annuity factor by the aggregate amount payable annually is then multiplied by the applicable adjustment factor at the appropriate interest rate component for payments made at the end of the specified periods. The applicable adjustment factor may be found using the formula in Figure 3 to this paragraph (d)(2)(iv)(B) and calculating the result to at least four decimal places. For the convenience of taxpayers, actuarial factors have been computed by the IRS and appear in Table K. Table K, which is referenced and explained by Publication 1457, can be found on the IRS website at https://www.irs.gov/retirement-plans/actuarial-tables. The provisions of this paragraph (d)(2)(iv)(B) are illustrated by the example in paragraph (d)(2)(iv)(B)(2) of this section.
(1) Sample factors from actuarial Tables S and K. For purposes of the example in paragraph (d)(2)(iv)(B)(2) of this section, the following factors from Tables S and K will be used: