Ala. Admin. Code r. 330-X-11-.02 - Seal Of The Licensee
(1)
Upon approval of licensure by the Board, licensees will be advised that they
should secure an official seal which shall be applied to all drawings,
specifications, reports and other engineering or land surveying documents
prepared by or under the direct control and personal supervision of the
licensees.
(2) The seals to be used
by the licensees are to be circular in form and from 1 5/8 to 2 inches in
diameter with copy of the design to be furnished each new licensee.
(3) Seals obtained prior to the adoption of
this rule and which are in conformance with prior Board rules are
acceptable.
(4) Rubber stamps and
computer generated seals identical in size, design and content with the
approved seals may be used by the licensee.
(5) Drawings, reports, or documents that are
signed using a digital signature, as defined in 330-X-.02(10), shall contain
authentication procedures.
Notes
Author: Alabama State Board of Registration for Professional Engineers and Land Surveyors
Statutory Authority: Code of Ala. 1975, ยงยง 34-11-9, 34-11-35.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.