Ala. Admin. Code r. 720-X-1-.02 - Minimum Standards for Installation, Service, and Repair
Current through Register Vol. 40, No. 6, March 31, 2022
(1) In the absence of locally adopted codes,
or minimum standards for the installation, service, and repair of plumbing,
gas, and medical gas, the board, pursuant to its authority under Section
34-37-2(a), Code of Ala. 1975, adopts the following
minimum standards for the installation, service, and repair of plumbing, gas,
and medical gas for all certified plumbing, gas, and medical gas contractors:
(a) All certified plumbing and gas
contractors shall comply with the minimum technical standards required by the
2015 International Residential Code for residential plumbing and gas
installations, service, and repairs. The administrative sections in Chapter 1
shall not be applicable. Where there is a conflict between this code and a
locally adopted code, this code shall govern.
(b) All certified plumbing contractors shall
comply with the minimum standards of the 2015 International Plumbing Code for
commercial plumbing installations, service, and repairs.
(c) All certified gas contractors shall
comply with the minimum standards of the 2015 International Fuel Gas Code for
commercial gas installations, service, and repairs.
(d) All certified medical gas contractors
shall comply with the minimum standards of the 2015 International Plumbing Code
for Nonflammable Medical Gases and the NFPA 99 for flammable medical gases.
Requires certification from NITC or other board approved agency or
entity.
Notes
Author: James M. Morgan
Statutory Authority: Code of Ala. 1975, 34-37-2, as amended.
The following state regulations pages link to this page.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.