17 AAC 45.290 - Property survey
(a) A lessee, permittee, or concessionaire
shall, unless otherwise stated in the lease, permit, or concession,
(1) provide to the department a boundary
survey plat of each airport lot or other land area described in the lease,
permit, or concession as part of the premises, incorporating any boundary
changes approved by the department, if
(A) a
boundary survey is required in connection with the filing of a building permit
under 17 AAC 45.280; or
(B) the department approves a lessee's,
permittee's, or concessionaire's requested change in the premises boundary;
and
(2) provide to the
department within 90 days after construction or installation of permanent
improvements on the premises an as-built drawing depicting the actual location
and dimensions of all improvements constructed or installed on the
premises.
(b) The
department will specify in writing any special instructions for a survey
required under (a) of this section.
(c) A premises boundary survey plat and an
as-built drawing required under (a) of this section must be prepared consistent
with generally accepted professional standards and any special instructions the
department specifies under (b) of this section.
(d) The lessee, permittee, or concessionaire
shall pay the cost of a survey or drawing required under this
section.
Notes
Authority:AS 02.15.020
AS 02.15.060
AS 02.15.090
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.