8 AAC 78.090 - Safety equipment
(a) An amusement ride must have grab bars,
foot rests, and other equipment necessary for safe entrance, exit, and support
of passengers while the ride is in operation.
(b) A safety belt or safety bar on an
amusement ride must be of sufficient strength to restrain the passenger, but
may not have an ultimate strength of less than 3,000 pounds. The anchor
provided for a safety belt or safety bar must have a strength at least equal to
that of the safety belt or safety bar.
(c) A restraining belt or bar used to confine
passengers within an amusement ride where shock loads cannot be generated must
be adequate to restrain the passengers within the amusement ride when it is in
motion.
(d) A safety belt snap must
be of the type that cannot be released without manual manipulation.
(e) The means for locking a safety bar in a
closed position must meet the manufacturer's requirements or be located or
guarded in a manner that will not permit a passenger to release the safety bar
while the ride is in motion.
(f)
All safeguards recommended by the manufacturer must be provided to prevent
physical injury, including injury that might occur from contact with a person's
hair.
Notes
Authority:AS 05.20.070
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.