Cal. Code Regs. Tit. 21, § 1382 - Qualified Inspection Service Agency
(a)
General. A qualified inspection service agency is any person, firm,
corporation, or association which periodically and on a continuous basis,
conducts inspections of certified valves to determine if the production line
fabrication and workmanship is in accordance with the conditions of
certification.
(b) Qualifications.
Qualifications for verification as a qualified inspection service agency shall
include any person, firm, corporation, or association which conforms to all of
the following:
(1) Submits a request to the
State Architect for verification as a qualified inspection service
agency.
(2) Employs personnel who
are qualified for inspection service. Such personnel shall perform or supervise
the performance of all inspections and shall so certify on the inspection
report required under Section
1382(f). Evidence
of such qualifications may include persons who are registered civil,
structural, mechanical, or quality control engineers.
(3) Designated as being qualified by the
State Architect. It shall be incumbent upon persons, firms, corporations, or
associations desiring verification as an inspection service agency to initiate
a request and present to the State Architect evidence of the above
qualifications which in the judgement of the State Architect is sufficient to
grant verification. The applicant shall submit sample copies of typical
inspection reports to demonstrate completeness and ability to reflect
compliance with requirements of the test standard.
(c) Discontinued Verification. Any inspection
service agency which is or has been verified as a qualified inspection service
agency either prior to or after the effective date of this section may continue
as a verified inspection service agency until verification is rescinded by the
State Architect for cause.
(d)
Affidavit. The applicant requesting verification pursuant to this section shall
submit a notarized affidavit to the effect that:
(1) The applicant inspection service agency
has no financial interest in any company manufacturing or distributing any
portion of the products to be inspected.
(2) The inspection service agency is not
owned, operated or controlled by any company manufacturing or distributing any
portion of the products to be inspected.
(e) Frequency of Service. Inspections by a
qualified inspection service agency shall be made not less than four times each
calendar year of the production run of every valve model in accordance with the
provisions of Section
1382(a). Such
inspections shall be on an unannounced basis.
EXCEPTION: When written approval is granted by the State Architect, the inspection frequency rate may be amended in specific cases to correspond more appropriately with production schedules.
(f) Reports. Reports shall be made by the
inspection service agency of every inspection made, the original of which shall
be submitted to the manufacturer and a copy thereof submitted to the State
Architect within 30 days of inspection.
(g) Change of Status. Verified inspection
service agencies shall notify the State Architect at the Headquarters Office
located in Sacramento, California, of any of the following occurrences within
30 days of such events. Notification shall be in writing.
(1) Any change in name or address.
(2) Any change in inspection forms or
procedures.
(3) Changes in
principal officers or in supervisory and responsible
personnel.
Notes
Note: Authority cited: Sections 19180- 19183, Health and Safety Code. Reference: Section 19183, Health and Safety Code.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.