Cal. Code Regs. Tit. 22, § 66264.223 - Response Actions
(a)
The owner or operator of surface impoundment units subject to section
66264.221(c) or
(f) shall have an approved response action
plan before receipt of waste. The response action plan shall set forth the
actions to be taken if the action leakage rate has been exceeded. At a minimum,
the response action plan shall describe the actions specified in subsection (b)
of this section.
(b) If the flow
rate into the leak detection system exceeds the action leakage rate for any
sump, the owner or operator shall:
(1) Notify
the Department in writing of the exceedence within 7 days of the
determination;
(2) Submit a
preliminary written assessment to the Department within 14 days of the
determination, as to the amount of liquids, likely sources of liquids, possible
location, size, and cause of any leaks, and short-term actions taken and
planned;
(3) Determine to the
extent practicable the location size, and cause of any leak;
(4) Determine whether waste receipt should
cease or be curtailed, whether any waste should be removed from the unit for
inspection, repairs, or controls, and whether or not the unit should be
closed;
(5) Determine any other
short-term and longer-term actions to be taken to mitigate or stop any leaks;
and
(6) Within 30 days after the
notification that the action leakage rate has been exceeded, submit to the
Department the results of the analyses specified in subsections (b)(3), (4) and
(5) of this section, the results of actions taken, and actions planned. Monthly
thereafter, as long as the flow rate in the leak detection system exceeds the
action leakage rate, the owner or operator shall submit to the Department a
report summarizing the results of any remedial actions taken and actions
planned.
(c) To make the
leak and/or remediation determinations in subsections (b)(3), (4) and (5) of
this section, the owner or operator shall:
(1)
(A) Assess the source of liquids and amounts
of liquids by source,
(B) Conduct a
fingerprint, hazardous constituent, or other analyses of the liquids in the
leak detection system to identify the source of liquids and possible location
of any leaks, and the hazard and mobility of the liquid; and
(C) Assess the seriousness of any leaks in
terms of potential for escaping into the environment; or
(2) Document why such assessments are not
needed.
Notes
Note: Authority cited: Sections 25150 and 25159, Health and Safety Code; and Governor's Reorganization Plan Number 1 of 1991. Reference: Sections 25159 and 25159.5, Health and Safety Code; and 40 CFR Section 264.223.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.