Cal. Code Regs. Tit. 17, 93130.22 app 1 - Sell-through Provisions and Dates that Apply to Manufacturers, Distributors, Importers, Fabricators, and Retailers

State Regulations
Compare

(a) Sell-through Dates that Apply to Manufacturers of Hardwood Plywood (HWPW), Particleboard (PB), and Medium Density Fiberboard (MDF).

(1) Sell-through by Manufacturers of Hardwood Plywood, Particleboard, and Medium Density Fiberboard Manufactured Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards.Hardwood plywood, particleboard, and medium density fiberboard manufactured before the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be sold, supplied, or offered for sale by the product manufacturer for up to three months after each of the specified effective dates. The specific sell-through dates for the Phase 1 and Phase 2 emission standards specified in section93120.2(a) are as follows:

(A) Hardwood plywood made with a veneer core (HWPW-VC).

1. Panels of HWPW-VC manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, or offered for sale by the product manufacturer until March 31, 2009. Beginning April 1, 2009, all HWPW-VC subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-VC manufactured before January 1, 2010, that comply with the Phase 1 standard, but do not comply with the Phase 2 standard, may be sold, supplied, or offered for sale by the product manufacturer until March 31, 2010. Beginning April 1, 2010, all HWPW-VC subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(B) Hardwood plywood made with a composite core (HWPW-CC).

1. Panels of HWPW-CC manufactured before July 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, or offered for sale by the product manufacturer until September 30, 2009. Beginning October 1, 2009, all HWPW-CC subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-CC manufactured before July 1, 2012, that comply with the Phase 1 standard, but do not comply with the Phase 2 standard, may be sold, supplied, or offered for sale by the product manufacturer until September 30, 2012. Beginning October 1, 2012, all HWPW-CC subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

1. Panels of PB, MDF, and thin MDF manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, or offered for sale by the product manufacturer until March 31, 2009. Beginning April 1, 2009, all PB, MDF, and thin MDF subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of PB and MDF manufactured before January 1, 2011, that comply with the Phase 1 standard, but do not comply with the Phase 2 standard, may be sold, supplied, or offered for sale by the product manufacturer until March 31, 2011. Beginning April 1, 2011, all PB and MDF subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

3. Panels of thin MDF manufactured before January 1, 2012, that comply with the Phase 1 standard, but do not comply with the Phase 2 standard, may be sold, supplied, or offered for sale by the product manufacturer until March 31, 2012. Beginning April 1, 2012, all thin MDF subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(b) Sell-through Dates that Apply to Distributors of HWPW, PB, and MDF.

(1) Sell-through by Distributors of Hardwood Plywood, Particleboard, and Medium Density Fiberboard Manufactured Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards.Hardwood plywood, particleboard, or medium density fiberboard manufactured before the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be sold, supplied, or offered for sale by distributors for up to five months after each of the specified effective dates. The specific sell-through dates for each of the Phase 1 and Phase 2 emission standards specified in section 93120.2(a) are as follows:

(A) Hardwood plywood made with a veneer core (HWPW-VC).

1. Panels of HWPW-VC manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by distributors until May 31, 2009. Beginning June 1, 2009, all HWPW-VC subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-VC manufactured before January 1, 2010, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by distributors until May 31, 2010. Beginning June 1, 2010, all HWPW-VC subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(B) Hardwood plywood made with a composite core (HWPW-CC).

1. Panels of HWPW-CC manufactured before July 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by distributors until November 30, 2009. Beginning December 1, 2009, all HWPW-CC subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-CC manufactured before July 1, 2012, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by distributors until November 30, 2012. Beginning December 1, 2012, all HWPW-CC subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

1. Panels of PB and MDF manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by distributors until May 31, 2009. Beginning June 1, 2009, all PB and MDF subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of PB and MDF manufactured before January 1, 2011, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by distributors until May 31, 2011. Beginning June 1, 2011, all PB and MDF subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(D) Thin MDF.

1. Panels of thin MDF manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by distributors until May 31, 2009. Beginning June 1, 2009, all thin MDF subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of thin MDF manufactured before January 1, 2012, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by distributors until May 31, 2012. Beginning June 1, 2012, all thin MDF subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(2) Sell-through by Distributors of Finished Goods Containing Hardwood Plywood made with a Veneer Core (HWPW-VC), Hardwood Plywood made with a Composite Core (HWPW-CC), Particleboard (PB), Medium Density Fiberboard (MDF), or thin MDF Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards.Finished goods containing HWPW-VC, HWPW-CC, PB, MDF, or thin MDF manufactured before the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be sold, supplied, offered for sale by distributors for up to eighteen months after each of the specified effective dates. The specific sell-through dates for the Phase 1 and Phase 2 emission standards specified in section 93120.2(a) are as follows:

(A) Finished goods containing hardwood plywood made with a veneer core (HWPW-VC).

1. Finished goods containing HWPW-VC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by distributors until June 30, 2010. Beginning July 1, 2010, finished goods containing HWPW-VC, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing HWPW-VC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by distributors until June 30, 2011. Beginning July 1, 2011, finished goods containing HWPW-VC, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(B) Finished goods containing hardwood plywood made with a composite core (HWPW-CC).

1. Finished goods containing HWPW-CC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by distributors until December 31, 2010. Beginning January 1, 2011, finished goods containing HWPW-CC, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing HWPW-CC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by distributors until December 31, 2013. Beginning January 1, 2014, finished goods containing HWPW-CC, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

1. Finished goods containing PB and/or MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by distributors until June 30, 2010. Beginning July 1, 2010, finished goods containing PB and/or MDF, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing PB and/or MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by distributors until June 30, 2012. Beginning July 1, 2012, finished goods containing PB and/or MDF, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(D) Finished goods containing thin MDF.

1. Finished goods containing thin MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by distributors until June 30, 2010. Beginning July 1, 2010, finished goods containing thin MDF, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing thin MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by distributors until June 30, 2013. Beginning July 1, 2013, finished goods containing thin MDF, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(1) Sell-through by Importers of Hardwood Plywood (HWPW), Particleboard (PB), and Medium Density Fiberboard (MDF) Manufactured Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards. Hardwood plywood, particleboard, or medium density fiberboard manufactured before the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be sold, supplied, offered for sale, or used by importers for up to three months after each of the specified effective dates. The specific sell-through dates for the Phase 1 and Phase 2 emission standards specified in section 93120.2(a)are as follows:

(A) Hardwood plywood made with a veneer core (HWPW-VC).

1. Panels of HWPW-VC manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by importers until March 31, 2009. Beginning April 1, 2009, all HWPW-VC subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-VC manufactured before January 1, 2010, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by importers until March 31, 2010. Beginning April 1, 2010, all HWPW-VC subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(B) Hardwood plywood made with a composite core (HWPW-CC).

1. Panels of HWPW-CC manufactured before July 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by importers until September 30, 2009. Beginning October 1, 2009, all HWPW-CC subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-CC manufactured before July 1, 2012, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by importers until September 30, 2012. Beginning October 1, 2012, all HWPW-CC subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

1. Panels of PB and MDF manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by importers until March 31, 2009. Beginning April 1, 2009, all PB and MDF subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of PB and MDF manufactured before January 1, 2011, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by importers until March 31, 2011. Beginning April 1, 2011, all PB and MDF subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(D) Thin MDF.

1. Panels of thin MDF manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, offered for sale, or used by importers until March 31, 2009. Beginning April 1, 2009, all thin MDF subject to the Phase 1 standard must comply with this standard, regardless of the date on which the products were manufactured.

2. Panels of thin MDF manufactured before January 1, 2012, that do not comply with the Phase 2 standard may be sold, supplied, offered for sale, or used by importers until March 31, 2012. Beginning April 1, 2012, all thin MDF subject to the Phase 2 standard must comply with this standard, regardless of the date on which the products were manufactured.

(2) Sell-through by Importers of Finished Goods Containing Hardwood Plywood made with a Veneer Core (HWPW-VC), Hardwood Plywood made with a Composite Core (HWPW-CC), Particleboard (PB), Medium Density Fiberboard (MDF), or thin MDF Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards.Finished goods containing HWPW-VC, HWPW-CC, PB, MDF, or thin MDF manufactured before the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be sold, supplied, offered for sale by importers for up to eighteen months after each of the specified effective dates. The specific sell-through dates for the Phase 1 and Phase 2 emission standards specified in section 93120.2(a) are as follows:

(A) Finished goods containing hardwood plywood made with a veneer core (HWPW-VC).

1. Finished goods containing HWPW-VC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by importers until June 30, 2010. Beginning July 1, 2010, finished goods containing HWPW-VC, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing HWPW-VC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by importers until June 30, 2011. Beginning July 1, 2011, finished goods containing HWPW-VC, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(B) Finished goods containing hardwood plywood made with a composite core (HWPW-CC).

1. Finished goods containing HWPW-CC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by importers until December 31, 2010. Beginning January 1, 2011, finished goods containing HWPW-CC, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing HWPW-CC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by importers until December 31, 2013. Beginning January 1, 2014, finished goods containing HWPW-CC, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

1. Finished goods containing PB and/or MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by importers until June 30, 2010. Beginning July 1, 2010, finished goods containing PB and/or MDF, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing PB and/or MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by importers until June 30, 2012. Beginning July 1, 2012, finished goods containing PB and/or MDF, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(D) Finished goods containing thin MDF.

1. Finished goods containing thin MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by importers until June 30, 2010. Beginning July 1, 2010, finished goods containing thin MDF, sold, supplied, or offered for sale must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing thin MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by importers until June 30, 2013. Beginning July 1, 2013, finished goods containing thin MDF, sold, supplied, or offered for sale must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(d) Sell-through Dates that Apply to Fabricators Using HWPW, PB, and MDF.

(1) Sell-through by Fabricators of Finished Goods Produced Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards.Finished goods containing HWPW-VC, HWPW-CC, PB, MDF, or thin MDF that does not comply with the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be used, sold, supplied, offered for sale by fabricators for up to eighteen months after each of the specified effective dates. The specific sell-through dates for the Phase 1 and Phase 2 emission standards specified in section 93120.2(a) are as follows:

(A) Finished goods containing hardwood plywood made with a veneer core (HWPW-VC).

1. Finished goods made with HWPW-VC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by fabricators until June 30, 2010. Beginning July 1, 2010, all finished goods sold, supplied, or offered for sale must be made with HWPW-VC that complies with the Phase 1 standard, regardless of the date that the finished good was fabricated.

2. Finished goods made with HWPW-VC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by fabricators until June 30, 2011. Beginning July 1, 2011, all finished goods sold, supplied, or offered for sale must be made with HWPW-VC that complies with the Phase 2 standard, regardless of the date that the finished good was fabricated.

(B) Finished goods containing hardwood plywood made with a composite core (HWPW-CC).

1. Finished goods made with HWPW-CC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by fabricators until December 31, 2010. Beginning January 1, 2011, all finished goods sold, supplied, or offered for sale must be made with HWPW-CC that complies with the Phase 1 standard, regardless of the date that the finished good was fabricated.

2. Finished goods made with HWPW-CC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by fabricators until December 31, 2013. Beginning January 1, 2014, all finished goods sold, supplied, or offered for sale must be made with HWPW-CC that complies with the Phase 2 standard, regardless of the date that the finished good was fabricated.

1. Finished goods made with PB and/or MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by fabricators until June 30, 2010. Beginning July 1, 2010, all finished goods sold, supplied, or offered for sale must be made with PB and/or MDF that complies with the Phase 1 standard, regardless of the date that the finished good was fabricated.

2. Finished goods made with PB and/or MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by fabricators until June 30, 2012. Beginning July 1, 2012, all finished goods sold, supplied, or offered for sale must be made with PB and/or MDF that complies with the Phase 2 standard, regardless of the date that the finished good was fabricated.

(D) Finished goods containing thin MDF.

1. Finished goods made with thin MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by fabricators until June 30, 2010. Beginning July 1, 2010, all finished goods sold, supplied, or offered for sale must be made with thin MDF that complies with the Phase 1 standard, regardless of the date that the finished good was fabricated.

2. Finished goods made with thin MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by fabricators until June 30, 2013. Beginning July 1, 2013, all finished goods sold, supplied, or offered for sale must be made with thin MDF that complies with the Phase 2 standard, regardless of the date that the finished good was fabricated.

(e) Sell-through Dates that Apply to Retailers of HWPW, PB, and MDF.

(1) Sell-through by Retailers of Hardwood Plywood made with a Veneer Core (HWPW-VC), Hardwood Plywood made with a Composite Core (HWPW-CC), Particleboard (PB), Medium Density Fiberboard (MDF), or thin MDF Panels Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards.Hardwood plywood, particleboard, or medium density fiberboard panels manufactured before the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be sold, supplied, or offered for sale by retailers for up to twelve months after each of the specified effective dates. The specific sell-through dates for the Phase 1 and Phase 2 emission standards specified in section 93120.2(a) are as follows:

(A) Hardwood plywood made with a veneer core (HWPW-VC).

1. Panels of HWPW-VC manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until December 31, 2009. Beginning January 1, 2010, all HWPW-VC, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-VC manufactured before January 1, 2010, that do not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until December 31, 2010. Beginning January 1, 2011, all HWPW-VC, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date on which the products were manufactured.

(B) Hardwood plywood made with a composite core (HWPW-CC).

1. Panels of HWPW-CC manufactured before July 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until June 30, 2010. Beginning July 1, 2010, all HWPW-CC, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date on which the products were manufactured.

2. Panels of HWPW-CC manufactured before July 1, 2012, that do not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until June 30, 2013. Beginning July 1, 2013, all HWPW-CC, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date on which the products were manufactured.

1. Panels of PB or MDF manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until December 31, 2009. Beginning January 1, 2010, all PB or MDF, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date on which the products were manufactured.

2. Panels of PB or MDF manufactured before January 1, 2011, that do not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until December 31, 2011. Beginning January 1, 2012, all PB or MDF, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date on which the products were manufactured.

(D) Thin MDF.

1. Panels of thin MDF manufactured before January 1, 2009, that do not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until December 31, 2009. Beginning January 1, 2010, all thin MDF, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date on which the products were manufactured.

2. Panels of thin MDF manufactured before January 1, 2012, that do not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until December 31, 2012. Beginning January 1, 2013, all thin MDF, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date on which the products were manufactured.

(2) Sell-through by Retailers of Finished Goods Containing Hardwood Plywood made with a Veneer Core (HWPW-VC), Hardwood Plywood made with a Composite Core (HWPW-CC), Particleboard (PB), Medium Density Fiberboard (MDF), or thin MDF Before the Effective Dates of the Phase 1 and Phase 2 Emission Standards. Finished goods containing HWPW-VC, HWPW-CC, PB, MDF, or thin MDF manufactured before the Phase 1 and Phase 2 effective dates specified in section 93120.2(a) may be sold, supplied, offered for sale, or used by retailers for up to eighteen months after each of the specified effective dates. The specific sell-through dates for the Phase 1 and Phase 2 emission standards specified in section 93120.2(a) are as follows:

(A) Finished goods containing hardwood plywood made with a veneer core (HWPW-VC).

1. Finished goods containing HWPW-VC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until June 30, 2010. Beginning July 1, 2010, finished goods containing HWPW-VC, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing HWPW-VC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until June 30, 2011. Beginning July 1, 2011, finished goods containing HWPW-VC, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(B) Finished goods containing hardwood plywood made with a composite core (HWPW-CC).

1. Finished goods containing HWPW-CC that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until December 31, 2010. Beginning January 1, 2011, finished goods containing HWPW-CC, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing HWPW-CC that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until December 31, 2013. Beginning January 1, 2014, finished goods containing HWPW-CC, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

1. Finished goods containing PB and/or MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until June 30, 2010. Beginning July 1, 2010, finished goods containing PB and/or MDF, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing PB and/or MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until June 30, 2012. Beginning July 1, 2012, finished goods containing PB and/or MDF, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

(D) Finished goods containing thin MDF.

1. Finished goods containing thin MDF that does not comply with the Phase 1 standard may be sold, supplied, or offered for sale by retailers until June 30, 2010. Beginning July 1, 2010, finished goods containing thin MDF, sold, supplied, or offered for sale, must comply with the Phase 1 standard, regardless of the date that the product was fabricated.

2. Finished goods containing thin MDF that does not comply with the Phase 2 standard may be sold, supplied, or offered for sale by retailers until June 30, 2013. Beginning July 1, 2013, finished goods containing thin MDF, sold, supplied, or offered for sale, must comply with the Phase 2 standard, regardless of the date that the product was fabricated.

Notes

Cal. Code Regs. Tit. 17, 93130.22 app 1

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.