1 CCR 301-25-36.0 - Retro-Reflective material
36.1
Retro-reflective material shall be installed on the bus conforming to the
requirements of FMVSS 131 and 217.
36.2 Rear of bus body: strips of between
1-inch and 2-inch retro-reflective NSBY material shall be applied
horizontally above the rear windows and above the rear bumper, extending from
the rear emergency exit perimeter marking outward to the left and right rear
corners of the bus, with vertical strips applied at the corners connecting the
horizontal strips.
36.3 "School
Bus" signs: shall be marked with retro-reflective NSBY material comprising
background for the lettering of the front and/or rear "School Bus"
signs.
36.4 Sides of the
multifunction bus body shall be marked with white retro-reflective material at
least 1 3/4 inches in width, extending the length of the bus body and located
(vertically) as close as practicable to the floor line.
36.5 Sides of the school bus body: shall be
marked with retro-reflective NSBY material at least 1 3/4 inches in width,
extending the length of the bus body and located (vertically) as close as
practical to the floor line
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.