Conn. Agencies Regs. § 19a-332a-8 - Specific requirements for asbestos encapsulation

Current through March 4, 2022

(a) All loose and hanging ACM shall be adequately wetted and removed as required in Section 19a-332a-7.
(b) Filler material applied to gaps in existing material shall contain no asbestos, adhere well to the substrate and provide an adequate base for the encapsulant.
(c) Encapsulants shall be applied using only airless spray equipment unless otherwise approved by the Department.

Notes

Conn. Agencies Regs. § 19a-332a-8
Effective December 27, 1990

The following state regulations pages link to this page.



State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.