Conn. Agencies Regs. § 19a-332a-9 - Specific requirements for asbestos enclosure

Current through March 4, 2022

(a) All loose and hanging ACM shall be adequately wetted and removed as required in Section 19a-332a-7 unless otherwise approved by the Department.
(b) Areas of ACM shall be sprayed with an encapsulant if they are to be disturbed during the installation of hangers, brackets or other portions of the enclosure.
(c) Non-asbestos containing substitutes shall be used to patch surfacing materials or thermal system insulation.

Notes

Conn. Agencies Regs. § 19a-332a-9
Effective December 27, 1990

The following state regulations pages link to this page.



State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.