Conn. Agencies Regs. § 25-128-40 - Pumps and pumping equipment
(a) Pumps and
pumping equipment shall be installed in the well to make the most efficient use
of well storage.
(b) Pumps and
pumping equipment shall be located to permit convenient access for inspection,
maintenance and repair.
(c) In the
event the base plate of a pump is placed directly over the well, the base plate
shall be of a type designed to form a watertight seal with the well casing or
pump foundation, as provided by section
19-13-B51j
of the Regulations of Connecticut State Agencies.
(d) The well shall be properly vented at the
well head to allow for pressure changes within the well.
(e) The electrical wiring used in connection
with the pump shall conform to specifications of the Connecticut State Building
Code.
(f) Contaminated water shall
not be used for the purpose of priming any pump.
(g)No connections shall be made between a
geothermal system and a water supply well or the water distribution system
connected to the water supply well.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.