Conn. Agencies Regs. § 25-128-49 - Well head completion and equipment

The completion of the well head and the equipment used shall be as follows:

(a) The top of the casing shall be cut off reasonably smooth and level.
(b) In the event the well head is enclosed, the enclosure shall be adequately drained. In the event a well pit is used, it shall be constructed in the manner provided by sections 19-13-B51h and 19-13-B51i of the Regulations of Connecticut State Agencies.
(c) All water piping shall be protected against freezing.
(d) The well shall be equipped with a tightly fixed vented cap or a sanitary seal with an access port for ventilation. The access port shall have a minimum, inside diameter of one quarter (1/4) inch. It shall be installed and maintained in such a manner as to prevent the entrance of water, dust, insects, or other foreign material, and to permit ready access for the purpose of water level measurement.

Notes

Conn. Agencies Regs. § 25-128-49
Effective May 21, 1993; amended 7/8/2022

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.