Fla. Admin. Code Ann. R. 62-296.403 - Phosphate Processing
Fluorides (water soluble or gaseous atomic weight 19) expressed as pounds of fluoride per ton of phosphate materials input to the system expressed as tons of P2O5.
(1) New Plants or Plant Sections. For the
purposes of this subsection, a "new plant or plant section" is any plant or
plant section other than an "existing plant or plant section" as described for
the purposes of subsection
62-296.403(2),
F.A.C.
(a) Wet process phosphoric acid
production and auxiliary equipment - 0.02 pounds.
(b) Run-of-pile triple super phosphate (TSP)
mixing belt and den and auxiliary equipment - 0.05 pounds.
(c) Run-of-pile TSP curing or storage process
and auxiliary equipment - 0.12 pounds.
(d) Granular triple super phosphate (GTSP)
production and auxiliary equipment.
1. GTSP
made by granulating run-of-pile TSP - 0.06 pounds.
2. GTSP made from phosphoric acid and
phosphate rock slurry - 0.15 pounds.
(e) GTSP storage and auxiliary equipment -
0.05 pounds.
(f) Diammonium
phosphate production and auxiliary equipment - 0.06 pounds.
(g) Calcining or other thermal phosphate rock
processing and auxiliary equipment excepting phosphate rock drying and
defluorinating - 0.05 pounds.
(h)
Defluorinating phosphate rock by thermal processing and auxiliary equipment -
0.37 pounds.
(i) All plants, plant
sections or unit operations and auxiliary equipment not listed in paragraphs
(a) through (h), above, must use the best available control
technology.
(2) Existing
plants or plant sections shall comply with subsection
62-296.403(1),
F.A.C., no later than July 1, 1975; or existing plant complexes with an
operating wet process phosphoric acid section (including any items in
paragraphs 62-296.403(1)(a) through
(f), F.A.C.) and other plant sections
processing or handling phosphoric acid or products of phosphoric acid
processing, total emissions from the entire complex shall not exceed 0.4 pounds
per ton of
P2O5
input to the wet process phosphoric acid section. For the purposes of this
subsection, an "existing plant, plant section, or plant complex" is any plant,
plant section, or plant complex which was in existence, in operation, or under
construction, or had received a permit to begin construction prior to January
18, 1972.
(3) Test Methods and
Procedures. All emissions tests performed pursuant to the requirements of this
rule shall comply with the following requirements.
(a) The test method for fluoride emissions
shall be EPA Method 13A or EPA Method 13B, as described at 40 C.F.R. Part 60,
Appendix A-5, adopted and incorporated by reference at Rule
62-204.800, F.A.C. The minimum
sample volume shall be 30 dry standard cubic feet.
(b) Test procedures shall meet all applicable
requirements of Chapter 62-297, F.A.C.
Notes
Rulemaking Authority 403.061 FS. Law Implemented 403.021, 403.031, 403.061, 403.087 FS.
Formerly 17-2.600(3), 17-296.403, Amended 11-23-94, 1-1-96, 3-13-96, 7-10-14, 11-5-20.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.