Ill. Admin. Code tit. 35, § 218.206 - Solids Basis Calculation

Current through Vol. 46, No. 16, April 15, 2022

Limitations in terms of kg (lbs) of VOM emissions per 1 (gal) of solids as applied at each coating applicator shall be determined by the following equation:

Image

where:

S

=

The limitation on VOM emissions in terms of kg VOM/l (lbs VOM/gal) of solids;

C

=

The limitation on VOM emissions in terms of kg/l (lbs/gal) of coating (minus water and any compounds which are specifically excluded from the definition of VOM) specified in Section 218.204 of this Part;

D

=

The density of VOM in the coating. For the purposes of calculating S, the density is 0.882 kg VOM/l VOM (7.36 lbs VOM/gal VOM).

Notes

Ill. Admin. Code tit. 35, § 218.206

Amended at 17 Ill. Reg. 16636, effective September 27, 1993

The following state regulations pages link to this page.



State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.