Ill. Admin. Code tit. 35, § 720.111 - References

The following documents are incorporated by reference for the purposes of this Part and 35 Ill. Adm. Code 702 through 705, 721 through 728, 730, 733, 738, and 739:

a) Non-Regulatory Government Publications and Publications of Recognized Organizations and Associations:

ACGME. Available from the Accreditation Council for Graduate Medical Education, 401 North Michigan Avenue, Suite 2000, Chicago, IL 60611, 312-755-5000, www.acgme.org:

"Accreditation Council for Graduate Medical Education: Glossary of Terms", March 19, 2009, referenced in 35 Ill. Adm. Code 722.300.

BOARD NOTE: Also available on the Internet for download and viewing as a PDF file at the following Internet address: www.acgme.org/Portals/0/PDFs/ab_ACGMEglossary.pdf.

ACI. Available from the American Concrete Institute, 38800 Country Club Dr., Farmington Hills, MI 48331-3439:

ACI 318-83: "Building Code Requirements for Reinforced Concrete", adopted November 1983, referenced in 35 Ill. Adm. Code 724.673 and 725.543.

ANSI. Available from the American National Standards Institute, 1899 L Street, N.W., 11^th Floor, Washington, DC 20036, 202-293-8020. www.ansi.org:

See ASME/ANSI B31.3 and B31.4 and supplements below in this subsection (a) under ASME.

API. Available from the American Petroleum Institute, 1220 L Street, Northwest, Washington, DC 20005, (855) 999-9870, www.api.org:

"Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems", API Recommended Practice 1632, Second Edition, December 1987, referenced in 35 Ill. Adm. Code 724.292, 724.295, 725.292, and 725.295.

"Evaporative Loss from External Floating-Roof Tanks", API publication 2517, Third Edition, February 1989, USEPA-approved for 35 Ill. Adm. Code 721.983 and 725.984.

"Guide for Inspection of Refinery Equipment", Chapter XIII, "Atmospheric and Low Pressure Storage Tanks", 4^th Edition, 1981, reaffirmed December 1987, referenced in 35 Ill. Adm. Code 721.291, 724.291, 724.293, 725.291, and 725.292.

"Installation of Underground Petroleum Storage Systems", API Recommended Practice 1615, Fourth Edition, November 1987, referenced in 35 Ill. Adm. Code 724.292.

ASME. Available from the American Society of Mechanical Engineers, Two Park Avenue, New York, NY 10016-5990, 800-843-2763, https://www.asme.org:

"Chemical Plant and Petroleum Refinery Piping", ASME/ANSI B31.3-1987, as supplemented by B31.3a-1988 and B31.3b-1988, referenced in 35 Ill. Adm. Code 724.292 and 725.292. Also available from ANSI.

"Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia, and Alcohols", ASME/ANSI B31.4-1986, as supplemented by B31.4a-1987, referenced in 35 Ill. Adm. Code 724.292 and 725.292. Also available from ANSI.

ASTM International. Available from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, 877-909-ASTM or 610-832-9500, www.astm.org:

ASTM C 94-90, "Standard Specification for Ready-Mixed Concrete", approved March 30, 1990, referenced in 35 Ill. Adm. Code 724.673 and 725.543.

ASTM D 88-87, "Standard Test Method for Saybolt Viscosity", approved April 24, 1981, reapproved January 1987, referenced in 35 Ill. Adm. Code 726.200.

ASTM D 93-80, "Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester", approved 1980, USEPA-approved for 35 Ill. Adm. Code 721.121.

ASTM D 140-70, "Standard Practice for Sampling Bituminous Materials", approved 1970, referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D 346-75, "Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis", approved 1975, referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D 420-69, "Guide to Site Characterization for Engineering, Design, and Construction Purposes", approved 1969, referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D 1452-65, "Standard Practice for Soil Investigation and Sampling by Auger Borings", approved 1965, referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D 1946-90, "Standard Practice for Analysis of Reformed Gas by Gas Chromatography", approved March 30, 1990, USEPA-approved for 35 Ill. Adm. Code 724.933 and 725.933.

ASTM D 2161-87, "Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal or to Saybolt Furol Viscosity", March 27, 1987, referenced in 35 Ill. Adm. Code 726.200.

ASTM D 2234-76, "Standard Practice for Collection of a Gross Sample of Coal", approved 1976, referenced in Appendix A to 35 Ill. Adm. Code 721.

ASTM D 2267-88, "Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography", approved November 17, 1988, USEPA-approved for 35 Ill. Adm. Code 721.963 and 724.963.

ASTM D 2382-88, "Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High Precision Method)", approved October 31, 1988, USEPA-approved for 35 Ill. Adm. Code 724.933 and 725.933.

ASTM D 2879-92, "Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope", approved 1992, USEPA-approved for 35 Ill. Adm. Code 725.984, referenced in 35 Ill. Adm. Code 721.963, 724.963, and 725.963.

ASTM D 3828-87, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved December 14, 1988, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-97, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 1997, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-98, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 1998, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-02, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2002, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-05, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2005, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-07, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2007, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-07a, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2007, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-09, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2009, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-12, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2012, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-12a, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2012, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-16a, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2016, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-16, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2016, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 3828-16a, "Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester", approved 2016, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 8174-18, "Standard Test Methods for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester", approved 2018, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM D 8175-18, "Standard Test Methods for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester", approved 2018, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 168-88, "Standard Practices for General Techniques of Infrared Quantitative Analysis", approved May 27, 1988, USEPA-approved for 35 Ill. Adm. Code 721.963 and 724.963.

ASTM E 169-87, "Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis", approved February 1, 1987, USEPA-approved for 35 Ill. Adm. Code 721.963 and 724.963.

ASTM E 260-85, "Standard Practice for Packed Column Gas Chromatography", approved June 28, 1985, USEPA-approved for 35 Ill. Adm. Code 724.963.

ASTM E 681-85, "Standard Practice for Concentration Limits of Flammability of Chemicals (Vapors and Gases)", approved 1985, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-98, "Standard Practice for Concentration Limits of Flammability of Chemicals (Vapors and Gases)", approved 1998, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-01, "Standard Practice for Concentration Limits of Flammability of Chemicals (Vapors and Gases)", approved 2001, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-04, "Standard Practice for Concentration Limits of Flammability of Chemicals (Vapors and Gases)", approved 2004, reapproved 2015, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-09, "Standard Practice for Concentration Limits of Flammability of Chemicals (Vapors and Gases)", approved 1009, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM E 681-09(2015), "Standard Practice for Concentration Limits of Flammability of Chemicals (Vapors and Gases)", approved 1009, reapproved 2015, USEPA-approved for 35 Ill. Adm. Code 721.121(a).

ASTM G 21-70 (1984a), "Standard Practice for Determining Resistance of Synthetic Polymer Materials to Fungi", approved 1970 referenced in 35 Ill. Adm. Code 724.414 and 725.414.

ASTM G 22-76 (1984b), "Standard Practice for Determining Resistance of Plastics to Bacteria", referenced in 35 Ill. Adm. Code 724.414 and 725.414.

GPO. Available from the Superintendent of Documents, U.S. Government Publishing Office, 732 Capitol Street, N.W., Washington, DC 20401-0001, 202-512-1800, www.gpo.gov:

Standard Industrial Classification Manual (1987), referenced in 35 Ill. Adm. Code 702.110 and Section 720.110.

"Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846 (Third Edition, November 1986), as amended by Updates I (July 1992), II (November 1994), IIA (August 1993), IIB (January 1995), III (December 1996), IIIA (April 1998), and IIIB (November 2004) (document number 955-001-00000-1). See below in this subsection (a) under NTIS.

ISO. Available from the International Organization for Standardization, BIBC II, Chemin de Blandonnet 8, CP 401, 1214 Vernier, Geneva, Switzerland (phone: +41 22 749 01 11; www.iso.org/store.html):

International Standard ISO 3166-1:2013, "Codes for the representation of names of countries and their subdivisions - Part 1: Country code", Third edition (2013), referenced in 35 Ill. Adm. Code 722.183 and 722.184. Latest Board search for updated version: July 2020.

BOARD NOTE: ISO maintains a web page with a free on-line list of country codes accessible at www.iso.org/obp/ui/#search.

NACE. Available from the National Association of Corrosion Engineers, 15835 Park Ten Place, Houston, TX 77084, 281-228-6200, www.nace.org:

"Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems", NACE Recommended Practice RP0285-85, approved March 1985, referenced in 35 Ill. Adm. Code 724.292, 724.295, 725.292, and 725.295.

NFPA. Available from the National Fire Protection Association, P.O. Box 9101, Quincy, MA 02269-9101, 800-344-3555, www.nfpa.org:

"Flammable and Combustible Liquids Code", NFPA 30 (1977), referenced in 35 Ill. Adm. Code 722.116.

"Flammable and Combustible Liquids Code", NFPA 30 (1981), referenced in 35 Ill. Adm. Code 722.116.

"Flammable and Combustible Liquids Code", NFPA 30 (1984), referenced in 35 Ill. Adm. Code 721.298, 724.298, 725.298, 726.211, and 727.290.

"Flammable and Combustible Liquids Code", NFPA 30 (1987), referenced in 35 Ill. Adm. Code 721.298, 722.116, 724.298, 725.298, 726.211, and 727.290.

"Flammable and Combustible Liquids Code", NFPA 30 (2003), as supplemented by TIA 03-1 (2004), and corrected by Errata 30-03-01 (2004), referenced in 35 Ill. Adm. Code 721.298, 722.116, 724.298, 725.298, 726.211, and 727.290.

"Standard System for the Identification of the Hazards of Materials for Emergency Response", NFPA 704 (2012), referenced in 35 Ill. Adm. Code 722.114 and 722.116.

USEPA, NSCEP. National Service Center for Environmental Publications, https://www.epa.gov/nscep.

"Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry", Revision A, February 1999, USEPA publication number EPA-821/R-98-002, USEPA-approved for Appendix I to 35 Ill. Adm. Code 721. (Search: 821r98002.) Also available from NTIS.

"Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry", Revision B, February 2010, USEPA publication number EPA-821/R-10-001, USEPA-approved for Appendix I to 35 Ill. Adm. Code 721. (Search: 821r10001.) Also available from NTIS.

NTIS. Available from the National Technical Information Service, U.S. Department of Commerce, 5301 Shawnee Road, Alexandria, VA 22312, 703-605-6000 or 800-553-6847, www.ntis.gov:

"APTI Course 415: Control of Gaseous Emissions", December 1981, USEPA publication number EPA-450/2-81-005, NTIS document number PB80-208895, USEPA-approved for 35 Ill. Adm. Code 703.210, 703.211, 703.352, 724.935, and 725.935. Also available from NSCEP.

BOARD NOTE: "APTI" denotes USEPA's "Air Pollution Training Institute".

"Generic Quality Assurance Project Plan for Land Disposal Restrictions Program", USEPA publication number EPA-530/SW-87-011, March 15, 1987, NTIS document number PB88-170766, referenced in 35 Ill. Adm. Code 728.106.

"Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry", Revision A, February 1999, USEPA publication number EPA-821/R-98-002, NTIS document number PB99-121949, USEPA-approved for Appendix I to 35 Ill. Adm. Code 721. Also available from USEPA, NSCEP.

"Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM; Nonpolar Material) by Extraction and Gravimetry", Revision B, February 2010, USEPA publication number EPA-821/R-10-001, NTIS document number PB2011-100735, USEPA-approved for Appendix I to 35 Ill. Adm. Code 721. Also available from USEPA, NSCEP.

"Methods for Chemical Analysis of Water and Wastes", Third Edition, March 1983, USEPA document number EPA-600/4-79-020, NTIS document number PB84-128677, referenced in 35 Ill. Adm. Code 725.192. Also available from USEPA, NSCEP.

"North American Industry Classification System", July 2017, U.S. Department of Commerce, Bureau of the Census, document number PB2007-100002 (hardcover printed volume) or PB2007-500023, referenced in Section 720.110 (definition of "NAICS Code") for the purposes of Section 720.142, and in 35 Ill. Adm. Code 721.104.

BOARD NOTE: Also available on the Internet from the Bureau of Census at www.census.gov/eos/www/naics.

"Procedures Manual for Ground Water Monitoring at Solid Waste Disposal Facilities", August 1977, EPA-530/SW-611, NTIS document number PB84-174820, referenced in 35 Ill. Adm. Code 725.192. Also available from USEPA, NSCEP.

"Screening Procedures for Estimating the Air Quality Impact of Stationary Sources", October 1992, USEPA publication number EPA-454/R-92-019, NTIS document number 93-219095, referenced in 35 Ill. Adm. Code 726.204 and 726.206. Also available from USEPA, NSCEP and USEPA, Receptor Analysis Branch.

"Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846 (Third Edition, November 1986; Revision 6, January 2005), as amended by Updates I (July 1992), II (November 1994), IIA (August 1993), IIB (January 1995), III (December 1996), IIIA (April 1998), and IIIB (November 2004) (document number 955-001-00000-1), generally referenced in Appendices A and I to 35 Ill. Adm. Code 721 and 35 Ill. Adm. Code 726.200, 726.206, 726.212, 728.106, and 728.107 (in addition to the references cited below for specific methods), www.epa.gov/hw-sw846:

Method 0010 (November 1986) (Modified Method 5 Sampling Train), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 0011 (December 1996) (Sampling for Selected Aldehyde and Ketone Emissions from Stationary Sources), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721 and Appendix I to 35 Ill. Adm. Code 726.

Method 0020 (November 1986) (Source Assessment Sampling System), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 0023A (December 1996) (Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofuran Emissions from Stationary Sources), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill. Adm. Code 726, and 35 Ill. Adm. Code 726.204.

Method 0030 (November 1986) (Volatile Organic Sampling Train), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 0031 (December 1996) (Sampling Method for Volatile Organic Compounds (SMVOC)), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 0040 (December 1996) (Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar^® Bags), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 0050 (December 1996) (Isokinetic HCl/Cl₂ Emission Sampling Train), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill. Adm. Code 726, and 35 Ill. Adm. Code 726.207.

Method 0051 (December 1996) (Midget Impinger HCl/Cl₂ Emission Sampling Train), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill. Adm. Code 726, and 35 Ill. Adm. Code 726.207.

Method 0060 (December 1996) (Determination of Metals in Stack Emissions), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, Appendix I to 35 Ill. Adm. Code 726, and 35 Ill. Adm. Code 726.206.

Method 0061 (December 1996) (Determination of Hexavalent Chromium Emissions from Stationary Sources), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721, 35 Ill. Adm. Code 726.206, and Appendix I to 35 Ill. Adm. Code 726.

Method 1010B (December 2018) (Test Methods for Flash Point by Pensky-Martens Closed Cup Tester), USEPA-approved for 35 Ill. Adm. Code 721.121 and Appendix I to 35 Ill. Adm. Code 721.

Method 1020B (November 2004) (Standard Test Methods for Flash Point by Setaflash (Small Scale) Closed-cup Apparatus), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 1020C (December 2018) (Test Methods for Flash Point by Pensky-Martens Closed Cup Tester), USEPA-approved for 35 Ill. Adm. Code 721.121 and Appendix I to 35 Ill. Adm. Code 721.

Method 1110A (November 2004) (Corrosivity Toward Steel), USEPA-approved for 35 Ill. Adm. Code 721.122 and Appendix I to 35 Ill. Adm. Code 721.

Method 1310B (November 2004) (Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721 and referenced in Appendix I to 35 Ill. Adm. Code 728.

Method 1311 (November 1992) (Toxicity Characteristic Leaching Procedure), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721; for 35 Ill. Adm. Code 721.124, 728.107, and 728.140; and for Table T to 35 Ill. Adm. Code 728.

Method 1312 (November 1994) (Synthetic Precipitation Leaching Procedure), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 1320 (November 1986) (Multiple Extraction Procedure), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 1330A (November 1992) (Extraction Procedure for Oily Wastes), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 9010C (November 2004) (Total and Amenable Cyanide: Distillation), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721 and 35 Ill. Adm. Code 728.140, 728.144, and 728.148, referenced in Tables H and U to 35 Ill. Adm. Code 728.

Method 9012B (November 2004) (Total and Amenable Cyanide (Automated Colorimetric, with Off-Line Distillation)), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721 and 35 Ill. Adm. Code 728.140, 728.144, and 728.148, referenced in Tables H and U to 35 Ill. Adm. Code 728.

Method 9040C (November 2004) (pH Electrometric Measurement), USEPA-approved for 35 Ill. Adm. Code 721.122 and Appendix I to 35 Ill. Adm. Code 721.

Method 9045D (November 2004) (Soil and Waste pH), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 9060A (November 2004) (Total Organic Carbon), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721 and 35 Ill. Adm. Code 721.934, 721.963, 724.934, 724.963, 725.934, and 725.963.

Method 9070A (November 2004) (n-Hexane Extractable Material (HEM) for Aqueous Samples), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 9071B (April 1998) (n-Hexane Extractable Material (HEM) for Sludge, Sediment, and Solid Samples), USEPA-approved for Appendix I to 35 Ill. Adm. Code 721.

Method 9095B (November 2004) (Paint Filter Liquids Test), USEPA-approved for 35 Ill. Adm. Code 720.110; Appendix I to 35 Ill. Adm. Code 721; and 35 Ill. Adm. Code 724.290, 724.414, 725.290, 725.414, 725.981, 727.290, and 728.132.

OECD. Organization for Economic Cooperation and Development, Environment Directorate, 2 rue Andre Pascal, F-75775 Paris Cedex 16, France (www.oecd.org), also OECD Washington Center, 1776 I Street, NW, Suite 450, Washington, DC 20006, 202-452-0050 www.oecd-ilibrary.org:

OECD Guidance Manual. "Guidance Manual for the Implementation of Council Decision C(2001)107/FINAL, as Amended, on the Control of Transboundary Movements of Wastes Destined for Recovery Operations", 2009 (also called "Guidance Manual for the Control of Transboundary Movements of Recoverable Materials" in OECD documents), but only the following segments, which set forth the substantive requirements of OECD decision C(2001)107/FINAL (June 14, 2001), as amended by C(2001)107/ADD1 (February 28, 2002), C(2004)20 (March 9, 2004), C(2005)141 (December 2, 2005), and C(2008)156 (December 4, 2008):

"Annex B: OECD Consolidated List of Wastes Subject to the Green Control Procedure" (individually referred to as "Annex B to OECD Guidance Manual" in 35 Ill. Adm. Code 722), combining Appendix 3 to OECD decision C(2001)107/FINAL, as amended as described above, together with the text of Annex IX ("List B") to the "Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal" ("Basel Convention"). Latest Board search for updated version: August 2020.

"Annex C: OECD Consolidated List of Wastes Subject to the Amber Control Procedure" (individually referred to as "Annex C to OECD Guidance Manual" in 35 Ill. Adm. Code 722), combining Appendix 4 to OECD decision C(2001)107/FINAL, as amended, together with the text of Annexes II ("Categories of Wastes Requiring Special Consideration") and VIII ("List A") to the Basel Convention. Latest Board search for updated version: August 2020.

BOARD NOTE: The OECD Guidance Manual is available online from OECD at www.oecd.org/environment/waste/guidance-manual-control-transboundary-movements-recoverable-wastes.pdf. The OECD and the Basel Convention consider the OECD Guidance Manual unofficial text of these documents. Despite this unofficial status, the Board has chosen to follow USEPA's lead and incorporate the OECD Guidance Manual by reference, instead of separately incorporating the OECD decision C(2001)107/FINAL (with its subsequent amendments: OECD decisions C(2001)107/ADD1, C(2004)20, C(2005)141, and C(2008)156) and the Basel Convention by reference. Use of the OECD Guidance Manual eases reference to the documents, increases access to the documents, and facilitates future updates to this incorporation by reference. All references to "OECD C(2001)107/FINAL" in the text of 35 Ill. Adm. Code 722 refer to both the OECD decision and the Basel Convention that the OECD decision references. The OECD Guidance Manual includes as Annex A the full text of OECD document C(2001)107/FINAL, with amendments, and Annexes B and C set forth lists of wastes subject to Green control procedures and wastes subject to Amber control procedures, respectively, which consolidate the wastes from C(2001)107/FINAL together with those from the Basel Convention.

OECD Guideline for Testing of Chemicals, "Ready Biodegradability", Method 301B (July 17, 1992), "CO₂ Evolution (Modified Sturm Test)", referenced in 35 Ill. Adm. Code 724.414. Latest Board search for updated version: August 2020.

STI. Available from the Steel Tank Institute, 944 Donata Ct., Lake Zurich, IL 60047, 847-438-8265, stispfa.org:

"Standard for Dual Wall Underground Steel Storage Tanks" (1986), referenced in 35 Ill. Adm. Code 724.293.

USDOD. Available from the United States Department of Defense:

"Defense Explosives Safety Regulation 6055.09, Edition 1" (DESR 6055.09), as in effect on January 13, 2019, referenced in 35 Ill. Adm. Code 726.305. Latest Board search for updated version: August 2020.

"The Motor Vehicle Inspection Report" (DD Form 626), as in effect in October 2011, referenced in 35 Ill. Adm. Code 726.303. Latest Board search for updated version: August 2020.

"Requisition Tracking Form" (DD Form 1348), as in effect in July 1991, referenced in 35 Ill. Adm. Code 726.303. Latest Board search for updated version: August 2020.

"The Signature and Tally Record" (DD Form 1907), as in effect in October 2011, referenced in 35 Ill. Adm. Code 726.303. Latest Board search for updated version: August 2020.

"DOD Multimodal Dangerous Goods Declaration" (DD Form 2890), as in effect in September 2015, referenced in 35 Ill. Adm. Code 726.303. Latest Board search for updated version: August 2020.

BOARD NOTE: DESR 6055.09, DD Form 626, DD Form 1348, DD Form 1907, and DD Form 2890 are available on-line for download in pdf format from www.esd.whs.mil/DD/.

USEPA, e-Manifest System. Available from United States Environmental Protection Agency, e-Manifest System (www.epa.gov/e-manifest):

"Hazardous Waste Manifest Instructions". Instructions for revision 12-17 of USEPA Forms 8700-22 and 8700-22A, referenced in 35 Ill. Adm. Code 722.120. Available at www.epa.gov/hwgenerators/uniform-hazardous-waste-manifest-instructions-sample-form-and-continuation-sheet. Latest Board search for updated version: August 2020.

USEPA, OGWDW. Available from United States Environmental Protection Agency, Office of Ground Water and Drinking Water, State Programs Division, 1200 Pennsylvania Ave., N.W. (Mail Code 4606M), Washington, DC 20460:

"Inventory of Injection Wells", USEPA Form 7520-16 (Revised 8-01), referenced in 35 Ill. Adm. Code 704.148 and 704.283.

"Technical Assistance Document: Corrosion, Its Detection and Control in Injection Wells", USEPA publication number EPA-570/9-87-002, August 1987, referenced in 35 Ill. Adm. Code 730.165.

USEPA, Receptor Analysis Branch. Available from Receptor Analysis Branch, USEPA (MD-14), Research Triangle Park, NC 27711:

"Screening Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised", October 1992, USEPA publication number EPA-450/R-92-019, USEPA-approved for Appendix I to 35 Ill. Adm. Code 726.

BOARD NOTE: Also available for purchase from NTIS (see above) and on the Internet at www3.epa.gov/scram001/guidance/guide/EPA-454R-92-019_OCR.pdf.

USEPA Region 6. Available from United States Environmental Protection Agency, Region 6, Multimedia Permitting and Planning Division, 1445 Ross Avenue, Dallas, TX 75202 (phone: 214-665-7430):

"EPA RCRA Delisting Program - Guidance Manual for the Petitioner", March 23, 2000, referenced in Section 720.122.

USGSA. Available from the United States Government Services Administration:

Government Bill of Lading (GBL) (GSA Standard Form 1103, rev 9/2003, supplemented as necessary with GSA Standard Form 1109, rev 09/1998), referenced in Section 726.303. Latest Board search for updated version: August 2020.

BOARD NOTE: Available on-line for download in various formats from www.gsa.gov/forms/forms.htm.

b) Code of Federal Regulations. Available from the Superintendent of Documents, U.S. Government Publishing Office, Washington, DC 20401, 202-783-3238, www.ecfr.gov or https://www.govinfo.gov/app/collection/cfr:

10 CFR 20.2006 (2023) (Transfer for Disposal and Manifests), referenced in 35 Ill. Adm. Code 726.425 and 726.450.

Table II, column 2 in appendix B to 10 CFR 20 (2023) (Water Effluent Concentrations), referenced in 35 Ill. Adm. Code 702.110, 730.103, and 730.151.

Appendix G to 10 CFR 20 (2023) (Requirements for Transfers of Low-Level Radioactive Waste Intended for Disposal at Licensed Land Disposal Facilities and Manifests), referenced in 35 Ill. Adm. Code 726.440.

10 CFR 71 (2023) (Packaging and Transportation of Radioactive Material), referenced generally in 35 Ill. Adm. Code 726.430.

10 CFR 71.5 (2023) (Transportation of Licensed Material), referenced in 35 Ill. Adm. Code 726.425.

15 CFR 30.4(b) (2023) (Electronic Export Information Filing, Procedures, Deadlines, and Certification Statements), referenced in 35 Ill. Adm. Code 721.139.

15 CFR 30.6 (2023) (Electronic Export Information Data Elements), referenced in 35 Ill. Adm. Code 721.139.

21 CFR 203.3(y) (2023) ("Prescription Drug"), referenced in 35 Ill. Adm. Code 726.600.

21 CFR 1300 through 1317 (2023) (Drug Enforcement Administration, Department of Justice), referenced in 35 Ill. Adm. Code 726.604 and 726.606.

21 CFR 1300.01 (2023) (Definitions Relating to Controlled Substances), referenced in 35 Ill. Adm. Code 726.604 and 726.606.

21 CFR 1300.05 (2023) (Definitions Relating to the Disposal of Controlled Substances), referenced in 35 Ill. Adm. Code 726.606.

21 CFR 1308.11 through 1308.15 (2023) (Schedules), referenced in 35 Ill. Adm. Code 726.606.

21 CFR 1317.90 (2023) (Methods of Destruction), referenced in 35 Ill. Adm. Code 726.606.

21 CFR 1317.95 (2023) (Destruction Procedures), referenced in 35 Ill. Adm. Code 726.606.

29 CFR 1910.1200 (2023) (Hazard Communication), referenced in 35 Ill. Adm. Code 722.115.

33 CFR 153.203 (2023) (Procedure for the Notice of Discharge), referenced in 35 Ill. Adm. Code 723.130 and 739.143.

40 CFR 3.3 (2023) (What Definitions Are Applicable to This Part?), referenced in Section 720.104.

40 CFR 3.10 (2023) (What Are the Requirements for Electronic Reporting to EPA?), referenced in Section 720.104.

40 CFR 3.2000 (2023) (What Are the Requirements Authorized State, Tribe, and Local Programs' Reporting Systems Must Meet?), referenced in Section 720.104.

40 CFR 51.100(ii) (2023) (Definitions), referenced in 35 Ill. Adm. Code 726.200.

Appendix W to 40 CFR 51 (2023) (Guideline on Air Quality Models), referenced in 35 Ill. Adm. Code 726.204.

BOARD NOTE: Also available from NTIS (see above for contact information) as "Guideline on Air Quality Models", Revised 1986, USEPA publication number EPA-450/12-78-027R, NTIS document numbers PB86-245248 (Guideline) and PB88-150958 (Supplement).

Appendix B to 40 CFR 52.741 (2023) (VOM Measurement Techniques for Capture Efficiency), referenced in 35 Ill. Adm. Code 703.213, 703.352, 721.984, 721.986, 721.989, 724.982, 724.984, 724.986, 724.989, 725.983, 725.985, 725.987, and 725.990.

40 CFR 60 (2023) (Standards of Performance for New Stationary Sources), referenced generally in 35 Ill. Adm. Code 721.104, 721.950, 721.964, 721.980, 724.964, 724.980, 725.964, and 725.980.

Subpart VV of 40 CFR 60 (2023) (Standards of Performance for Equipment Leaks of VOC in the Synthetic Organic Chemicals Manufacturing Industry), referenced in 35 Ill. Adm. Code 721.989, 724.989, and 725.990.

Appendix A to 40 CFR 60 (2023) (Test Methods), referenced generally in 35 Ill. Adm. Code 726.205 (in addition to the references cited below for specific methods):

Method 1 (Sample and Velocity Traverses for Stationary Sources), referenced in 35 Ill. Adm. Code 726.205.

Method 2 (Determination of Stack Gas Velocity and Volumetric Flow Rate (Type S Pitot Tube)), referenced in 35 Ill. Adm. Code 721.934, 724.933, 724.934, 725.933, 725.934, and 726.205.

Method 2A (Direct Measurement of Gas Volume through Pipes and Small Ducts), referenced in 35 Ill. Adm. Code 721.933, 724.933, 725.933, and 726.205.

Method 2B (Determination of Exhaust Gas Volume Flow Rate from Gasoline Vapor Incinerators), referenced in 35 Ill. Adm. Code 726.205.

Method 2C (Determination of Gas Velocity and Volumetric Flow Rate in Small Stacks or Ducts (Standard Pitot Tube)), referenced in 35 Ill. Adm. Code 721.933, 724.933, 725.933, and 726.205.

Method 2D (Measurement of Gas Volume Flow Rates in Small Pipes and Ducts), referenced in 35 Ill. Adm. Code 721.933, 724.933, 725.933, and 726.205.

Method 2E (Determination of Landfill Gas Production Flow Rate), referenced in 35 Ill. Adm. Code 726.205.

Method 2F (Determination of Stack Gas Velocity and Volumetric Flow Rate with Three-Dimensional Probes), referenced in 35 Ill. Adm. Code 726.205.

Method 2G (Determination of Stack Gas Velocity and Volumetric Flow Rate with Two-Dimensional Probes), referenced in 35 Ill. Adm. Code 726.205.

Method 2H (Determination of Stack Gas Velocity Taking into Account Velocity Decay Near the Stack Wall), referenced in 35 Ill. Adm. Code 726.205.

Method 3 (Gas Analysis for the Determination of Dry Molecular Weight), referenced in 35 Ill. Adm. Code 724.443 and 726.205.

Method 3A (Determination of Oxygen and Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure)), referenced in 35 Ill. Adm. Code 726.205.

Method 3B (Gas Analysis for the Determination of Emission Rate Correction Factor or Excess Air), referenced in 35 Ill. Adm. Code 726.205.

Method 3C (Determination of Carbon Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources), referenced in 35 Ill. Adm. Code 726.205.

Method 4 (Determination of Moisture Content in Stack Gases), referenced in 35 Ill. Adm. Code 726.205.

Method 5 (Determination of Particulate Matter Emissions from Stationary Sources), referenced in 35 Ill. Adm. Code 726.205.

Method 5A (Determination of Particulate Matter Emissions from the Asphalt Processing and Asphalt Roofing Industry), referenced in 35 Ill. Adm. Code 726.205.

Method 5B (Determination of Nonsulfuric Acid Particulate Matter Emissions from Stationary Sources), referenced in 35 Ill. Adm. Code 726.205.

Method 5D (Determination of Particulate Matter Emissions from Positive Pressure Fabric Filters), referenced in 35 Ill. Adm. Code 726.205.

Method 5E (Determination of Particulate Matter Emissions from the Wool Fiberglass Insulation Manufacturing Industry), referenced in 35 Ill. Adm. Code 726.205.

Method 5F (Determination of Nonsulfate Particulate Matter Emissions from Stationary Sources), referenced in 35 Ill. Adm. Code 726.205.

Method 5G (Determination of Particulate Matter Emissions from Wood Heaters (Dilution Tunnel Sampling Location)), referenced in 35 Ill. Adm. Code 726.205.

Method 5H (Determination of Particulate Emissions from Wood Heaters from a Stack Location), referenced in 35 Ill. Adm. Code 726.205.

Method 5I (Determination of Low Level Particulate Matter Emissions from Stationary Sources), referenced in 35 Ill. Adm. Code 726.205.

Method 18 (Measurement of Gaseous Organic Compound Emissions by Gas Chromatography), referenced in 35 Ill. Adm. Code 721.933, 721.934, 724.933, 724.934, 725.933, and 725.934.

Method 21 (Determination of Volatile Organic Compound Leaks), referenced in 35 Ill. Adm. Code 703.213, 721.934, 721.935, 721.963, 721.983, 724.934, 724.935, 724.963, 725.934, 725.935, 725.963, and 725.984.

Method 22 (Visual Determination of Fugitive Emissions from Material Sources and Smoke Emissions from Flares), referenced in 35 Ill. Adm. Code 721.933, 724.933, 724.1101, 725.933, 725.1101, and 727.900.

Method 23 (Determination of Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofurans from Stationary Sources) referenced in 35 Ill. Adm. Code 726.204.

Method 25A (Determination of Total Gaseous Organic Concentration Using a Flame Ionization Analyzer), referenced in 35 Ill. Adm. Code 721.934, 724.934, and 725.985.

Method 25D (Determination of the Volatile Organic Concentration of Waste Samples), referenced in 35 Ill. Adm. Code 721.983, 724.982, 725.983, and 725.984.

Method 25E (Determination of Vapor Phase Organic Concentration in Waste Samples), referenced in 35 Ill. Adm. Code 721.983 and 725.984.

Method 27 (Determination of Vapor Tightness of Gasoline Delivery Tank Using Pressure-Vacuum Test), referenced in 35 Ill. Adm. Code 721.986, 724.986, and 725.987.

40 CFR 61 (2023) (National Emission Standards for Hazardous Air Pollutants), referenced generally in 35 Ill. Adm. Code 721.104, 721.933, 721.950, 721.964, 721.980, 724.933, 724.964, 725.933, 725.964, and 725.980.

Subpart V of 40 CFR 61 (2023) (National Emission Standard for Equipment Leaks (Fugitive Emission Sources)), referenced in 35 Ill. Adm. Code 721.989, 724.989, and 725.990.

Subpart FF of 40 CFR 61 (2023) (National Emission Standard for Benzene Waste Operations), referenced in 35 Ill. Adm. Code 724.982 and 725.983.

40 CFR 63 (2023) (National Emission Standards for Hazardous Air Pollutants for Source Categories), referenced generally in 35 Ill. Adm. Code 721.293, 721.933, 721.950, 721.964, 721.980, 724.933, 724.964, 724.980, 725.933, 725.964, 725.980, and 726.200.

Subpart RR of 40 CFR 63 (2023) (National Emission Standards for Individual Drain Systems), referenced in 35 Ill. Adm. Code 721.984, 724.984, 724.985, 725.985, and 725.986.

Subpart EEE of 40 CFR 63 (2000) (National Emission Standards for Hazardous Air Pollutants from Hazardous Waste Combustors), referenced in 35 Ill. Adm. Code 703.280.

Subpart EEE of 40 CFR 63 (2023) (National Emission Standards for Hazardous Air Pollutants from Hazardous Waste Combustors) (includes 40 CFR 63.1206 (When and How Must You Comply with the Standards and Operating Requirements?), 63.1215 (What are the Health-Based Compliance Alternatives for Total Chlorine?), 63.1216 (What are the Standards for Solid-Fuel Boilers that Burn Hazardous Waste?), 63.1217 (What are the Standards for Liquid-Fuel Boilers that Burn Hazardous Waste?), 63.1218 (What are the Standards for Hydrochloric Acid Production Furnaces that Burn Hazardous Waste?), 63.1219 (What are the Replacement Standards for Hazardous Waste Incinerators?), 63.1220 (What are the Replacement Standards for Hazardous Waste-Burning Cement Kilns?), and 63.1221 (What are the Replacement Standards for Hazardous Waste-Burning Lightweight Aggregate Kilns?)), referenced in Appendix A to 35 Ill. Adm. Code 703 and 35 Ill. Adm. Code 703.155, 703.205, 703.208, 703.221, 703.232, 703.320, 703.280, 724.440, 724.701, 724.950, 725.440, and 726.200.

Method 301 (Field Validation of Pollutant Measurement Methods from Various Waste Media) in appendix A to 40 CFR 63 (2023) (Test Methods), referenced in 35 Ill. Adm. Code 721.983 and 725.984.

Appendix C to 40 CFR 63 (2023) (Determination of the Fraction Biodegraded (F_bio) in a Biological Treatment Unit), referenced in 35 Ill. Adm. Code 725.984.

Appendix D to 40 CFR 63 (2023) (Test Methods), referenced in 35 Ill. Adm. Code 721.983 and 725.984.

40 CFR 136.3 (Identification of Test Procedures) (2023), referenced in 35 Ill. Adm. Code 702.110, 704.150, 704.187, and 730.103.

40 CFR 144.70 (2023) (Wording of the Instruments), referenced in 35 Ill. Adm. Code 704.240.

40 CFR 232.2 (2023) (Definitions), referenced in 35 Ill. Adm. Code 721.104.

40 CFR 257 (2023) (Criteria for Classification of Solid Waste Disposal Facilities and Practices), referenced in 35 Ill. Adm. Code 739.181.

Subpart B of 40 CFR 257 (2023) (Disposal Standards for the Receipt of Conditionally Exempt Small Quantity Generator (CESQG) Wastes at Non-Municipal Non-Hazardous Waste Disposal Units) (40 CFR 257.5 through 257.30), referenced in 35 Ill. Adm. Code 722.114.

40 CFR 258 (2023) (Criteria for Municipal Solid Waste Landfills), referenced in 35 Ill. Adm. Code 739.181.

40 CFR 260.21(b) (2023) (Alternative Equivalent Testing Methods), referenced in Section 720.121.

40 CFR 261.151 (2023) (Wording of the Instruments), referenced in 35 Ill. Adm. Code 721.251.

Appendix III to 40 CFR 261 (2023) (Chemical Analysis Test Methods), referenced in 35 Ill. Adm. Code 704.150 and 704.187.

Appendix to 40 CFR 262 (2023) (Uniform Hazardous Waste Manifest and Instructions (EPA Forms 8700-22 and 8700-22A and Their Instructions)), referenced in Appendix A to 35 Ill. Adm. Code 722 and 35 Ill. Adm. Code 724.986 and 725.987.

40 CFR 264.151 (2023) (Wording of the Instruments), referenced in 35 Ill. Adm. Code 724.251 and 727.240.

40 CFR 264.1311 (2023) (Manifest Transactions Subject to Fees), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1312 (2023) (User Fee Calculation Methodology), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1313 (2023) (User Fee Revisions), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1314 (2023) (How to Make User Fee Payments), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1315 (2023) (Sanctions for Delinquent Payments), referenced in 35 Ill. Adm. Code 724.171.

40 CFR 264.1316 (2023) (Informal Fee Dispute Resolution), referenced in 35 Ill. Adm. Code 724.171.

Subpart FF of 40 CFR 264 (2023) (Fees for the Electronic Hazardous Waste Manifest Program), referenced in Sections 720.104 and 720.105.

Appendix I to 40 CFR 264 (2023) (Recordkeeping Instructions), referenced in Appendix A to 35 Ill. Adm. Code 724.

Appendix IV to 40 CFR 264 (2023) (Cochran's Approximation to the Behrens-Fisher Students' T-Test), referenced in Appendix D to 35 Ill. Adm. Code 724.

Appendix V to 40 CFR 264 (2023) (Examples of Potentially Incompatible Waste), referenced in Appendix E to 35 Ill. Adm. Code 724 and 35 Ill. Adm. Code 727.270.

Appendix VI to 40 CFR 264 (2023) (Political Jurisdictions in Which Compliance with § 264.18(a) Must Be Demonstrated), referenced in 35 Ill. Adm. Code 703.306, 724.118, and 727.110.

40 CFR 265.1311 (2023) (Manifest Transactions Subject to Fees), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1312 (2023) (User Fee Calculation Methodology), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1313 (2023) (User Fee Revisions), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1314 (2023) (How to Make User Fee Payments), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1315 (2023) (Sanctions for Delinquent Payments), referenced in 35 Ill. Adm. Code 725.171.

40 CFR 265.1316 (2023) (Informal Fee Dispute Resolution), referenced in 35 Ill. Adm. Code 725.171.

Subpart FF of 40 CFR 265 (2023) (Fees for the Electronic Hazardous Waste Manifest Program), referenced in Sections 720.104 and 720.105.

Appendix I to 40 CFR 265 (2023) (Recordkeeping Instructions), referenced in Appendix A to 35 Ill. Adm. Code 725.

Appendix III to 40 CFR 265 (2023) (EPA Interim Primary Drinking Water Standards), referenced in Appendix C to 35 Ill. Adm. Code 725.

Appendix IV to 40 CFR 265 (2023) (Tests for Significance), referenced in Appendix D to 35 Ill. Adm. Code 725.

Appendix V to 40 CFR 265 (2023) (Examples of Potentially Incompatible Waste), referenced in 35 Ill. Adm. Code 725.277, 725.301, 725.330, 725.357, 725.382, and 725.413 and Appendix E to 35 Ill. Adm. Code 725.

Appendix IX to 40 CFR 266 (2023) (Methods Manual for Compliance with the BIF Regulations), referenced generally in Appendix I to 35 Ill. Adm. Code 726.

Section 4.0 (Procedures for Estimating the Toxicity Equivalence of Chlorinated Dibenzo-p-Dioxin and Dibenzofuran Congeners), referenced in 35 Ill. Adm. Code 726.200 and 726.204.

Section 5.0 (Hazardous Waste Combustion Air Quality Screening Procedure), referenced in 35 Ill. Adm. Code 726.204 and 726.206.

Section 7.0 (Statistical Methodology for Bevill Residue Determinations), referenced in 35 Ill. Adm. Code 726.212.

BOARD NOTE: Also available from NTIS (see above for contact information) as "Methods Manual for Compliance with BIF Regulations: Burning Hazardous Waste in Boilers and Industrial Furnaces", December 1990, USEPA publication number EPA-530/SW-91-010, NTIS document number PB91-120006.

40 CFR 267.151 (2023) (Wording of the Instruments), referenced in 35 Ill. Adm. Code 727.240.

40 CFR 270.5 (2023) (Noncompliance and Program Reporting by the Director), referenced in 35 Ill. Adm. Code 703.305.

40 CFR 302 (2023) (Designation, Reportable Quantities, and Notification), referenced in 35 Ill. Adm. Code 721.293.

40 CFR 403.5 (2023) (National Pretreatment Standards: Prohibited Discharges), referenced in 35 Ill. Adm. Code 721.104 and 726.605.

40 CFR 711.15(a)(4)(i)(C) (2023) (Designation, Reportable Quantities, and Notification), referenced in 35 Ill. Adm. Code 721.104.

40 CFR 761 (2023) (Polychlorinated Biphenyls (PCBs) Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions), referenced generally in 35 Ill. Adm. Code 728.145.

40 CFR 761.3 (2023) (Definitions), referenced in 35 Ill. Adm. Code 728.102 and 739.110.

40 CFR 761.60 (2023) (Disposal Requirements), referenced in 35 Ill. Adm. Code 728.142.

40 CFR 761.65 (2023) (Storage for Disposal), referenced in 35 Ill. Adm. Code 728.150.

40 CFR 761.70 (2023) (Incineration), referenced in 35 Ill. Adm. Code 728.142.

Subpart B of 49 CFR 107 (2022) (Exemptions), referenced generally in 35 Ill. Adm. Code 724.986 and 725.987.

49 CFR 171 (2022) (General Information, Regulations, and Definitions), referenced generally in 35 Ill. Adm. Code 721.104, 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 171.3 (2022) (Hazardous Waste), referenced in 35 Ill. Adm. Code 722.133.

49 CFR 171.8 (2022) (Definitions and Abbreviations), referenced in 35 Ill. Adm. Code 726.609, 733.118, 733.138, 733.152, 733.155, and 739.143.

49 CFR 171.15 (2022) (Immediate Notice of Certain Hazardous Materials Incidents), referenced in 35 Ill. Adm. Code 723.130 and 739.143.

49 CFR 171.16 (2022) (Detailed Hazardous Materials Incident Reports), referenced in 35 Ill. Adm. Code 723.130 and 739.143.

49 CFR 172 (2022) (Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements), referenced generally in 35 Ill. Adm. Code 721.104, 721.986, 722.131, 722.132, 724.986, 725.987, 726.609, 733.114, 733.118, 733.134, 733.138, 733.152, 733.155, and 739.143.

Table to 49 CFR 172.101 (2022) (Hazardous Materials Table), referenced in 35 Ill. Adm. Code 721.104, 722.183, 722.184, 724.112, and 725.112.

49 CFR 172.304 (2022) (Marking Requirements), referenced in 35 Ill. Adm. Code 722.132 and 766.608.

Subpart C of 49 CFR 172 (2022) (Shipping Papers), referenced in 35 Ill. Adm. Code 722.124 and 726.610.

Subpart D of 49 CFR 172 (2022) (Marking), referenced in 35 Ill. Adm. Code 726.608.

Subpart E of 49 CFR 172 (2022) (Labeling), referenced in 35 Ill. Adm. Code 722.114, 722.115, and 726.608.

Subpart F of 49 CFR 172 (2022) (Placarding), referenced in 35 Ill. Adm. Code 722.114, 722.115, 722.133, and 726.608.

49 CFR 173 (2022) (Shippers - General Requirements for Shipments and Packages), referenced generally in 35 Ill. Adm. Code 721.104, 721.986, 722.130, 724.416, 724.986, 725.416, 725.987, 726.608, 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 173.2 (2022) (Hazardous Materials Classes and Index to Hazard Class Definitions), referenced in 35 Ill. Adm. Code 733.152.

49 CFR 173.12 (2022) (Exceptions for Shipments of Waste Materials), referenced in 35 Ill. Adm. Code 724.416, 724.986, 725.416, and 725.987.

49 CFR 173.28 (2022) (Reuse, Reconditioning, and Remanufacture of Packagings), referenced in 35 Ill. Adm. Code 725.273.

49 CFR 173.50 (2022) (Class 1 - Definitions), referenced in 35 Ill. Adm. Code 721.123.

49 CFR 173.54 (2022) (Forbidden Explosives), referenced in 35 Ill. Adm. Code 721.123.

49 CFR 173.115 (2022) (Class 2, Divisions 2.1, 2.2, and 2.3 - Definitions), referenced in 35 Ill. Adm. Code 721.121.

49 CFR 173.127 (2022) (Class 2, Divisions 2.1, 2.2, and 2.3 - Definition and Assignment of Packaging Groups), referenced in 35 Ill. Adm. Code 721.121.

49 CFR 174 (2022) (Carriage by Rail), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 175 (2022) (Carriage by Aircraft), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 176 (2022) (Carriage by Vessel), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 177 (2022) (Carriage by Public Highway), referenced generally in 35 Ill. Adm. Code 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 177.817 (2022) (Shipping Papers), referenced in 35 Ill. Adm. Code 722.124.

49 CFR 178 (2022) (Specifications for Packagings), referenced generally in 35 Ill. Adm. Code 721.104, 721.986, 722.130, 724.416, 724.986, 725.416, 725.987, 726.608, 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 179 (2022) (Specifications for Tank Cars), referenced in 35 Ill. Adm. Code 721.104, 721.986, 722.130, 724.416, 724.986, 725.416, 725.987, 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 180 (2022) (Continuing Qualification and Maintenance of Packagings), referenced generally in 35 Ill. Adm. Code 721.986, 724.986, 725.987, 726.608, 726.609, 733.118, 733.138, 733.152, and 739.143.

49 CFR 190 (2022) (Pipeline Safety Programs and Rulemaking Procedures), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 191 (2022) (Transportation of Natural and Other Gas by Pipeline: Annual Reports, Incident Reports, and Safety-Related Condition Reports), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 192 (2022) (Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 193 (2022) (Liquefied Natural Gas Facilities: Federal Safety Standards), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 194 (2022) (Response Plans for Onshore Oil Pipelines), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 195 (2022) (Transportation of Hazardous Liquids by Pipeline), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 196 (2022) (Protection of Underground Pipelines from Excavation Activity), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 198 (2022) (Regulations for Grants to Aid State Pipeline Safety Programs), referenced generally in 35 Ill. Adm. Code 721.104.

49 CFR 199 (2022) (Drug and Alcohol Testing), referenced generally in 35 Ill. Adm. Code 721.104.

c) Federal Statutes:

Section 11 of the Atomic Energy Act of 1954 (42 U.S.C. 2014 (2018)), referenced in 35 Ill. Adm. Code 721.104 and 726.310.

Sections 301, 304, 307, and 402 of the Clean Water Act (33 U.S.C. 1311, 1314, 1337, and 1342 (2018)), referenced in 35 Ill. Adm. Code 721.293.

Sections 201(v), 201(w), and 512(j) of the Federal Food, Drug, and Cosmetic Act (FFDCA; 21 U.S.C. 321(v), 321(w), and 360b(j) (2018)), referenced in Section 720.110 and 35 Ill. Adm. Code 733.109.

Section 201(ff) of the Federal Food, Drug, and Cosmetic Act (FFDCA; 21 U.S.C. 321(ff) (2018)), referenced in Section 726.600.

Section 102(27) of the Controlled Substances Act (21 U.S.C. 802(27) (2018) ("Ultimate User")), referenced in 35 Ill. Adm. Code 726.606.

Section 1004 of the Resource Conservation and Recovery Act (42 U.S.C. 6903 (2018)), referenced in 35 Ill. Adm. Code 721.931, 721.951, 721.981, 724.931, 724.981, 725.931, 725.951, and 725.981.

Chapter 601 of subtitle VIII of 49 U.S.C. (49 U.S.C. 60101 through 60141 (2018)), referenced in 35 Ill. Adm. Code 721.104.

Section 1412 of the Department of Defense Authorization Act of 1986 (50 U.S.C. 1521(j)(1) (2018)), referenced in 35 Ill. Adm. Code 726.301.

d) This Section incorporates no later editions or amendments.

Notes

Ill. Admin. Code tit. 35, § 720.111

Amended at 38 Ill. Reg. 12378, effective 5/27/2014 Amended at 39 Ill. Reg. 1542, effective 1/12/2015 Amended at 40 Ill. Reg. 11286, effective 8/9/2016 Amended at 42 Ill. Reg. 21215, effective 11/19/2018 Amended at 43 Ill. Reg. 446, effective 12/6/2018 Amended at 43 Ill. Reg. 5817, effective 5/2/2019 Amended at 44 Ill. Reg. 15067, effective 9/3/2020 Amended at 48 Ill. Reg. 9723, effective 6/20/2024