Ill. Admin. Code tit. 35, § 725.298 - Special Requirements for Ignitable or Reactive Wastes
a) Ignitable or reactive waste must not be
placed in a tank system, unless either of the following conditions is
fulfilled:
1) The waste is treated, rendered
or mixed before or immediately after placement in the tank system so that the
following two conditions are fulfilled:
A) The
resulting waste, mixture, or dissolved material no longer meets the definition
of ignitable or reactive waste under 35 Ill. Adm. Code
721.121
or
721.123;
and
B) Section
725.117(b)
is complied with;
2) The
waste is stored or treated in such a way that it is protected from any material
or conditions that may cause the waste to ignite or react; or
3) The tank system is used solely for
emergencies.
b) The
owner or operator of a facility where ignitable or reactive waste is stored or
tested in tanks must comply with the requirements for the maintenance of
protective distances between the waste management area and any public ways,
streets, alleys, or an adjoining property line that can be built upon as
required in Tables 2-1 through 2-6 of "Flammable and Combustible Liquids Code",
NFPA 30, incorporated by reference in 35 Ill. Adm. Code
720.111(a).
Notes
Amended at 30 Ill. Reg. 3460, effective February 23, 2006
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.