Ill. Admin. Code tit. 77, § 785.575 - Cooling Dry Products
Prior to packaging and immediately following removal from the drying chamber the dry product shall be cooled to a temperature not exceeding 110° F. Section 785.578 Packaging, Repackaging and Storage
a) Containers: Packages or
containers used for the packaging of nonfat dry milk or other dry milk products
shall be any clean container or packaging material which will protect the
contents through the regular channels of trade, without impairment of quality
with respect to flavor, wholesomeness or moisture content under the normal
conditions of handling. In no instance will containers which have previously
been used for nonfood items be allowed to be use for the bulk handling of dairy
products.
b) Filling: Empty
containers shall be protected at all times from possible contamination and
containers which are to be lined shall not be prepared more than 1 hour in
advance of filling. Every precaution shall be taken during the filling
operation to minimize product dust and spillage. When necessary a mechanical
shaker shall be provided; the tapping or pounding of containers shall be
prohibited. The containers shall be closed immediately after filling and the
exterior shall be vacuumed or brushed when necessary to render them free of
product remnant before being transferred from the filling room to the palleting
or dry storage areas.
c)
Repackaging: The entire repackaging operation shall be conducted in a sanitary
manner with all precautions taken to prevent contamination and to minimize
dust. All exterior surfaces of individual containers shall be free of product
before overwrapping or packing in shipping containers (See Section
785.465). The flow shall be kept
free of dust accumulation, waste, cartons, liners, or other refuse. Conveyors,
packaging and cartonmaking equipment shall be vacuumed frequently during the
operating day to prevent the accumulation of dust. No bottles or glass
materials of any kind shall be permitted in the repackaging or hopper room. The
inlet openings of all hoppers and bins shall be screened, and placed well above
the floor level. The room and all packaging equipment shall be cleaned as often
as necessary to maintain a sanitary operation. Close attention shall be given
to cleaning points of equipment where residues of the dry product may
accumulate. A thorough cleanup including windows, doors, walls, light fixtures,
and ledges, shall be performed as frequently as is necessary to maintain
cleanliness and sanitation. All waste dry dairy products including dribble
product at the fillers shall be identified and disposed of as animal
feed.
d) Storage
1) Product: The packaged dry milk product
shall be stored or so arranged in aisles, rows, or sections and lots at least
18 inches from any wall and in such a manner as to be orderly, easily
accessible for inspection or for cleaning of the room. All bags and small
containers of product shall be placed on pallets elevated approximately 6
inches from the floor. The storage room shall be kept clean and dry and all
openings protected against entrance of insects and rodents.
2) Supplies: All supplies shall be placed on
dunnage or pallets and arranged in an orderly manner for accessibility and
cleaning of the room. Supplies shall be kept enclosed in their original
wrapping material until used. After removal of supplies from their original
containers they shall be kept in an enclosed metal cabinet, bins, or on
shelving and if not enclosed shall be protected from powder and dust or other
contamination. The room shall be vacuumed as often as necessary and kept clean
and orderly.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.