312 IAC 13-9-1 - Disinfection procedures for drilled wells
Authority: IC 25-39-4-2; IC 25-39-4-9
Affected: IC 25-39
Sec. 1.
(a) Except as
provided in subsection (d), the following procedures shall be used for the
disinfection of drilled wells:
(1) The amount
of water in the well shall be determined by multiplying the gallons per foot by
the number of feet of water in the well according to the following table:
| Diameter of Well in Inches | Gallons Per Foot |
| 2 | .16 |
| 3 | .37 |
| 4 | .65 |
| 5 | 1.00 |
| 6 | 1.50 |
| 8 | 2.60 |
| 10 | 4.10 |
| 12 | 6.00 |
(2)
At least one hundred (100) parts per million of chlorine concentration in water
are required for disinfection. For each one hundred (100) gallons of water in
the well, the amount of chlorine liquid or compound shown in the following
table shall be used:
| Laundry Bleach (5.25% chlorine) | Hypochlorite Granules (70% chlorine) |
| 3 cups | 2 ounces |
(3)
The solution prepared under subdivision (2) shall be poured into the well to
ensure the casing walls are wetted before the cover, cap, or seal is
installed.
(4) Instead of the
applications described in subdivisions (1) through (2), another application of
chlorine may be substituted by a water well driller which results in a chlorine
concentration of at least one hundred (100) parts per
million.
(b) As used in
this section, one (1) cup is equivalent to an eight (8) ounce measuring
cup.
(c) As used in this section,
one (1) ounce is equivalent to one (1) heaping tablespoon of
granules.
(d) This section does not
apply to a monitoring well or a dewatering well.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.