327 IAC 5-18-9 - Other pretreatment requirements
Authority: IC 13-14-8; IC 13-15-1-2; IC 13-15-2-1; IC 13-18-2; IC 13-18-3
Affected: IC 13-11-2; IC 13-13-5-1; IC 13-18-4
Sec. 9.
In addition to applicable pretreatment standards, an industrial user shall comply with the following:
(1) An effluent limitation more stringent
than the applicable pretreatment standard that is necessary to prevent:
(A) interference in the POTW receiving the
discharge; or
(B) violation of a
provision of section 2(a) of this rule or a state or federal water quality
standard that is applicable to the state waters ultimately receiving the
discharge from the industrial user after discharge from the POTW.
(2) Any requirement by the
commissioner to implement appropriate best management practices (BMPs) and to
develop a BMP plan in accordance with 327 IAC 5-9 if the industrial user uses,
manufactures, stores, handles, or discharges any pollutant listed as toxic
under Section 307(a)(1) of the Clean Water Act (
33 U.S.C.
1317(a)(1) ) or any
pollutant listed as hazardous under Section 311 of the Clean Water Act (
33 U.S.C.
1321 ) that may cause or allow significant
amounts of that pollutant to reach waters of the state, whether directly or
after discharge from the POTW, from certain ancillary manufacturing operations,
including:
(A) materials storage
areas;
(B) in-plant
transfer;
(C) process and materials
handling areas;
(D) loading and
unloading operations;
(E) plant
site run-off; and
(F) sludge and
waste disposal areas.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.