Sec. 620 IAC 1-1-31 - Adoption by reference from 55 Federal Register

ยง 620 IAC 1-1-31. Adoption by reference from 55 Federal Register

Authority: IC 22-8-1.1-7

Affected: IC 22-8-1.1-15

Sec. 31.

The following standards, deletions, revocations, revisions, republications, corrections, and amendments are incorporated by reference into the rules of the Indiana occupational safety standards commission:

(1) Occupational Exposure to Lead, 29 CFR 1910.1025 to amend engineering controls for large nonferrous foundries (twenty (20) or more employees) to fifty (50) micrograms per cubic meter and small nonferrous foundries (fewer than twenty (20) employees) to seventy-five (75) micrograms per cubic meter as found in 55 FR 20, Tuesday, January 30, 1990, on pages 3166 through 3167.

(2) Occupational Exposure to Lead, 29 CFR 1910.1025 to delete in Appendix B, in "VIII. Medical Surveillance-Paragraph (J)," in the eighth paragraph, the seventh sentence, which reads "This multiple physician review mechanism, however, has been temporarily delayed by the Court of Appeals." as published in 55 FR 30, Tuesday, February 13, 1990, on page 4999.

(3) Occupational Exposures to Hazardous Chemicals in Laboratories, 29 CFR 1910, Subpart Z to amend by adding Section 1910.1450, the final rule for occupational exposures to hazardous chemicals in laboratories, as applied to all laboratories that use hazardous chemicals in accordance with the definition of laboratory use and laboratory scale provided in the standard. Covered laboratories are obliged to maintain employee exposures at or below the permissible exposure limits specified in 29 CFR 1910, Subpart Z through the formulation and implementation of a chemical hygiene plan, employee training and information, medical consultation and examinations, hazard identification, respirator use, and record keeping. To the extent possible, the standard allows a large measure of flexibility in compliance methods as published in 55 FR 21, Wednesday, January 31, 1990, on pages 3327 through 3335.

(4) Occupational Exposures to Hazardous Chemicals in Laboratories, 29 CFR 1910.1450 to correct typographical errors as published in 55 FR 44, Tuesday, March 6, 1990, on page 7967.

(5) Occupational Exposures to Hazardous Chemicals in Laboratories, 29 CFR 1910.1450 to correct typographical errors as published in 55 FR 62, Friday, March 30, 1990, on pages 12110 through 12111.

(6) Air Contaminants, 29 CFR 1910.1000 to stay the effective date until April 1, 1990, of the new exposure limits for nitroglycerin and ethylene glycol dinitrate for the explosives industry as published in 55 FR 24, Monday, February 5, 1990, on page 3724.

(7) Air Contaminants, 29 CFR 1910.1000 to stay the effective date until April 27, 1990, for the new exposure limits for nitroglycerin and ethylene glycol dinitrate for the explosives industry as published in 55 FR 67, Friday, April 6, 1990, on page 12819.

(8) Occupational Exposure to Asbestos, 29 CFR 1910.1001 and 29 CFR 1926.58 to respond to U.S. Court of Appeals for the District of Columbia's second group of remand issues expanding its ban on workplace smoking and adding training requirements covering the availability of smoking control programs; explaining how and why OSHA's respirator requirements will result in employee risk being reduced below that remaining at the PEL; and adding a requirement that employers ensure that employees working in or contiguous to regulated areas comprehend required warning signs, and provide training programs that specifically instruct employees about the content and presence of signs and labels as published in 55 FR 24, Monday, February 5, 1990, on pages 3731 through 3732.

(9) Occupational Exposure to Lead, 29 CFR 1910.1025 to correct a typographical error as published in 55 FR 30, Tuesday, February 13, 1990, on page 5118.

(10) Hazardous Waste Operations and Emergency Response, 29 CFR 1910.120 to correct typographical errors, incorrect citations, and certain ambiguities in both the standard and preamble as published in 55 FR 72, Friday, April 13, 1990, on pages 14073 through 14075.

(11) Safety and Health Standards: Welding, Cutting, and Brazing, 29 CFR 1910.252 to redesignate and reorganize as 29 CFR 1910.252- 1910.255, which does not alter the substance of the present welding, cutting, and brazing standards in any way, nor affect the standard's present scope and application, and to amend the standards with certain minor, nonsubstantive changes as published in 55 FR 70, Wednesday, April 11, 1990, on pages 13696 through 13711.

(12) Air Contaminants, 29 CFR 1910.1000 to grant a petition for reconsideration of the final rule limit for nitroglycerin (NG) of one-tenth (0.1) milligrams per cubic meters and final rule STEL for ethylene glycol dinitrate (EGDN) of two-tenths (0.2) milligrams per cubic meters for civilian manufacture and distribution of explosives and propellants for civilian use, and stays the final rule limit STEL for NG for manufacture for military and space use of explosives and propellants until November 1, 1990, as published in 55 FR 90, Wednesday, May 9, 1990, on pages 19258 through 19259.

(13) Air Contaminants, 29 CFR 1910.1000 to revise a paragraph which appears in the preamble relating to carbon disulfide to follow the technical terminology used in sponge and cellophane manufacturing as published in 55 FR 111, Friday, June 8, 1990, on pages 23433 through 23434.

(14) Occupational Exposure to Formaldehyde, 29 CFR 1910.1048 to administratively stay the formaldehyde standards cancer warning label requirements for an additional sixty (60) days to August 13, 1990, as published in 55 FR 114, Wednesday, June 13, 1990, on page 24070.

(15) Nationally Recognized Testing Laboratories: MET Electrical Testing Company, Inc., to expand the recognition of National Recognized Testing Laboratory MET Electrical Testing Company, Inc. under 29 CFR 1910.7 to include the product categories listed within 55 FR 110, Thursday, June 7, 1990, on pages 23311 through 23312.

(16) Nationally Recognized Testing Laboratories: American Gas Association Laboratories, to expand the recognition of National Recognized Testing Laboratory American Gas Association Laboratories under 29 CFR 1910.7 for the equipment or materials listed within 55 FR 110, Thursday, June 7, 1990, on pages 23312 through 23316.

(17) Welding, Cutting, and Brazing, 29 CFR 1910.110 and 1910.272 to reflect new welding, cutting, and brazing designations as published in 55 FR 119, Wednesday, June 20, 1990, on page 25094.

(18) Electrical Safety Related Work Practices, 29 CFR 1910.331 through 29 CFR 1910.335 to adopt new standards mandating qualified personnel, personnel training requirements, safeguards for personnel, the selection and use of safe work practices and equipment, and corresponding amendments:

(A) 29 CFR 1910.26;

(B) 29 CFR 1910.67;

(C) 29 CFR 1910.68;

(D) 29 CFR 1910.94;

(E) 29 CFR 1910.103;

(F) 29 CFR 1910.106;

(G) 29 CFR 1910.110;

(H) 29 CFR 1910.178;

(I) 29 CFR 1910.179;

(J) 29 CFR 1910.180;

(K) 29 CFR 1910.181;

(L) 29 CFR 1910.252;

(M) 29 CFR 1910.261;

(N) 29 CFR 1910.265;

(O) 29 CFR 1910.266;

(P) 29 CFR 1910.304;

(Q) 29 CFR 1910.399; and

(R) the authority provisions of Subparts D, F, G, H, N, Q, R, and S; as published in 55 FR 151, Monday, August 6, 1990, on pages 32014 through 32020.

(19) Occupational Exposure to Formaldehyde, 29 CFR 1910.1048 to stay paragraphs (m)(1)(i) through (m)(4)(ii) until December 11, 1990, as published in 55 FR 155, Friday, August 10, 1990, on page 32616.

(20) Control of Hazardous Energy Sources (Lockout/Tagout), 29 CFR 1910.147 to correct grammatical and typographical errors as published in 55 FR 183, Thursday, September 20, 1990, on pages 38685 through 38687.

(21) Concrete and Masonry Construction Safety Standards; Lift Slab Construction Operations:

(A) 29 CFR 1926.705 to revise the standard to require:

(i) a registered professional engineer to design and plan the lifting operation;

(ii) proper demarcation; and

(iii) safe work practices;

(B) 29 CFR 1926.305 to remove and reserve paragraph (b);

(C) 29 CFR 1926.700 to add a new paragraph (b)(9); and

(D)29 CFR 1926 Subparts I and Q to amend the authority citations; as published in 55 FR 202, Thursday, October 18, 1990, on pages 42328 through 42329.

(22) Electrical Safety-Related Work Practices, 29 CFR 1910.252, 29 CFR 1910.331, 29 CFR 1910.333, 29 CFR 1910.334, and 29 CFR 1910.399, to correct errors and inaccuracies of the final standard (published at 55 FR 151) as published in 55 FR 212, Thursday, November 1, 1990, on pages 46052 through 46054.

(23) Air Contaminants, 29 CFR 1910.1000, Table Z-1A, to stay the carbon monoxide ceilings for blast furnaces, vessel blowing at basic oxygen furnaces and sinter plants until Eleventh Circuit Court of Appeals makes a decision in case of Courtaulds Fibers, Inc. vs. Department of Labor; and to change various effective dates for implementation of nitroglycerin STEL and engineering controls used in manufacturing of military and space explosives and propellants, as published in 55 FR 217, Thursday, November 8, 1990, on pages 46949 through 46950.

(24) Safety Standards for Stairways and Ladders Used in the Construction Industry, 29 CFR 1926 Subpart X, to revise the standard by revising and relocating existing provisions in Subparts L and M into Subpart X as published in 55 FR 220, Wednesday, November 14, 1990, on pages 47687 through 47691.

(25) Occupational Exposure to Asbestos, Tremolite, Anthophyllite, and Actinolite, 29 CFR 1926.58 and 29 CFR 1910.1001 to extend the administrative stay as published in 55 FR 237, Monday, December 10, 1990, on pages 50686 to 50687.

(26) Occupational Exposure to Formaldehyde, 29 CFR 1910.1048 to stay paragraphs (m)(1)(i) through (m)(4)(ii) until March 11, 1991, as published in 55 FR 242, Monday, December 17, 1990, on page 51699.

(Occupational Safety Standards Commission; 620 IAC 1-1-31; filed Dec 12, 1990, 1:50 p.m.: 14 IR 1051; filed Jan 22, 1991, 5:00 p.m.: 14 IR 1282; filed Oct 23, 1991, 5:00 p.m.: 15 IR 229; readopted filed November 26, 2013, 3:26 p.m.: 20131225-IR-620130406RFA Readopted filed 11/27/2019, 3:35 p.m.: 20191225-IR-620190506RFA)

The following state regulations pages link to this page.