675 IAC 31-2-6 - Standard practice for maintenance procedures for amusement rides and devices
Authority: IC 22-13-2-8
Affected: IC 22-15-2-7; IC 22-15-7
Sec. 6.
(a) That
certain document being titled Standard Practice for Maintenance Procedures for
Amusement Rides and Devices, 2005 edition approved August 15, 2005 (ASTM
F853-05), published by ASTM International, 100 Barr Harbor Drive, P.O. Box
C700, West Conshohocken, PA 19428-2959, is hereby adopted by reference as if
fully set out in this article save and except those revisions made in this
section.
(b) Delete subsection 1.2
in its entirety.
(c) Delete
subsection 2 in its entirety.
(d)
In subsection 4, add a first sentence to read as follows: If a manufacturer has
failed to perform the manufacturer's responsibilities, the failure may be a
basis to not issue a regulated amusement device operating permit.
(e) Change subsection 4.1.5.3 to read as
follows: Appropriate nondestructive testing, along with specified acceptance
criteria, including frequency and the special parts or areas to be
tested.
(f) In subsection 4.1.6,
delete "where applicable" and "If" without substitution.
(g) In subsection 4.1.7, delete "where
applicable" without substitution.
(h) In subsection 4.1.13, delete "known to
the manufacturer and" without substitution.
(i) In subsection 4.1.14.2, delete
"reasonable," and substitute "specific" and delete "ethical".
(j) Notwithstanding language to the contrary
in the primarily incorporated documents, the version of all secondarily
incorporated documents, which are documents referred to in the primarily
incorporated documents, shall be the version in effect on September 24,
2009.
Notes
NOTE: Transferred from the Regulated Amusement Device
Safety Board (685 IAC 1-2-6) to the Fire
Prevention and Building Safety Commission (675 IAC
31-2-6) by
P.L.
249-2019,
SECTION
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.