68 IAC 25-3-2 - LMGS component inventory
Authority: IC 4-33-4; IC 4-35-4
Affected: IC 4-33; IC 4-35
Sec. 2.
(a) The
casino licensee must include the LMGS components within the inventory required
by
68 IAC
2-6-6, including the following:
(1) Hardware and software under the control
and responsibility of the technology provider, the casino licensee, and the
commission.
(2) Access to hardware
or software granted to the casino licensee or technology provider through
contracts with third party providers.
(b) The LMGS inventory shall be divided into
controlled components, as described in section 6 of this rule, and
noncontrolled components and shall include the following information:
(1) Identification information for each
component, including the following at a minimum:
(A) The serial number assigned to the MGD by
the manufacturer.
(B) The name of
the manufacturer of the component.
(C) The physical location of the
component.
(D) Whether vendor
support will be needed to maintain the component.
(2) Documentation of the current topology of
the LMGS in the form of network diagrams that illustrate the physical and
logical connections between the components of the system.
(3) Wireless network configuration
parameters, including, but not limited to, the following:
(A) Addresses.
(B) Host name.
(C) Service set identification.
(D) Encryption.
(E) Related parameter setting.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
Authority: IC 4-33-4; IC 4-35-4
Affected: IC 4-33; IC 4-35
Sec. 2.
(a) The casino licensee must include the LMGS components within the inventory required by 68 IAC 2-6-6, including the following:
(1) Hardware and software under the control and responsibility of the technology provider, the casino licensee, and the commission.
(2) Access to hardware or software granted to the casino licensee or technology provider through contracts with third party providers.
(b) The LMGS inventory shall be divided into controlled components, as described in section 6 of this rule, and noncontrolled components and shall include the following information:
(1) Identification information for each component, including the following at a minimum:
(A) The serial number assigned to the MGD by the manufacturer.
(B) The name of the manufacturer of the component.
(C) The physical location of the component.
(D) Whether vendor support will be needed to maintain the component.
(2) Documentation of the current topology of the LMGS in the form of network diagrams that illustrate the physical and logical connections between the components of the system.
(3) Wireless network configuration parameters, including, but not limited to, the following:
(A) Addresses.
(B) Host name.
(C) Service set identification.
(D) Encryption.
(E) Related parameter setting.