Rule 327 IAC 8-3.2 - Technical Standards for Water Mains
- § 327 IAC 8-3.2-1 - Definitions
- § 327 IAC 8-3.2-2 - Incorporation by reference
- § 327 IAC 8-3.2-3 - Applicability
- § 327 IAC 8-3.2-4 - Certification
- § 327 IAC 8-3.2-5 - Additional information on construction permit applications
- § 327 IAC 8-3.2-6 - Required easements; other permits
- § 327 IAC 8-3.2-7 - Additional issuance requirements for construction permits
- § 327 IAC 8-3.2-8 - Water main materials
- § 327 IAC 8-3.2-9 - Separation of water mains from potential sources of contamination or damage
- § 327 IAC 8-3.2-10 - Water mains near surface water bodies
- § 327 IAC 8-3.2-11 - Flow rate and pressure in the water main
- § 327 IAC 8-3.2-12 - Sizing of piping and accessories
- § 327 IAC 8-3.2-13 - Use of dead-end mains
- § 327 IAC 8-3.2-14 - Placement of isolation valves and air relief valves
- § 327 IAC 8-3.2-15 - Fire and flushing hydrants
- § 327 IAC 8-3.2-16 - Chamber drainage
- § 327 IAC 8-3.2-17 - Installation
- § 327 IAC 8-3.2-18 - Disinfection
- § 327 IAC 8-3.2-19 - Cross connection control
- § 327 IAC 8-3.2-20 - Technical standard alternative demonstration
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.