Kan. Admin. Regs. § 112-107-7 - Gaming floor plan
(a) Each
applicant or gaming facility manager shall submit to the commission a floor
plan of its gaming floor and the restricted areas servicing the electronic
gaming operation. The floor plan shall include depictions drawn to a scale of
1/8 inch per foot, unless another scale is approved by the executive director ,
of the following:
(1) Each EGM area on the
gaming floor and each EGM location within each EGM area. EGM locations shall be
identified by number;
(2) the cage
and any satellite cage, including each cage window and window number;
(3) each count room and any trolley storage
area;
(4) each automated bill
validator, gaming ticket redemption machine, coupon redemption machine, and
jackpot payout machine;
(5) each
automated teller machine;
(6) each
area designated for the storage or repair of EGMs;
(7) the location of each vault and armored
car bay; and
(8) any additional
documentation requested by the executive director relating to the floor plan
for the gaming floor.
(b) A gaming facility manager shall not
commence electronic gaming operations until the floor plan depicting the
facility manager 's gaming floor and all restricted areas servicing the
electronic gaming operation has been approved in writing by the executive
director .
(c) A gaming facility
manager shall not change the number, configuration, or location of EGMs on the
floor plan approved under subsection (b) without the prior written approval of
the executive director .
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.