Kan. Admin. Regs. § 28-21-202 - Drugs and devices; labeling requirements
(a) If a drug or
device is not manufactured by the person whose name appears on the label, the
name shall be qualified by a phrase which reveals the connection such person
has with such drug or device, such as "manufactured for and packed by _____,"
"distributed by _____,"
or other similar phrase which expresses the facts.
(b) The statement of the
place of business shall include the street address, if any, of such place,
unless such street address is shown in a current city directory or telephone
directory.
(c) Where a person
manufactures, packs, or distributes a drug or device at a place other than his
principal place of business, the label may state the principal place of
business in lieu of the actual place where each package of such drug or device
was manufactured or packed or is to be distributed, if such statement is not
misleading in any particular.
(d)
The requirement that the label shall contain the name and place of business of
the manufacturer, packer, or distributor shall not be considered to relieve any
drug or device from the requirement that its label shall not be misleading in
any particular.
(e)
(1) The statement of the quantity of the
contents of a package of a drug shall reveal the quantity of such drug in the
package, exclusive of wrappers and other material packed with such drug.
(2) The statement shall be
expressed in the terms of weight, measure, numerical count, or a combination of
numerical count and weight or measure, which are generally used by consumers
and users of such drug to express quantity thereof and which give accurate
information as to such quantity. But if no general usage in expressing accurate
information as to the quantity of such drug exists among consumers and users
thereof, the statement of the quantity of a drug which is not in tablet,
capsule, ampule, or other unit form shall be in terms of weight if the drug is
solid, semisolid, or viscous, or in terms of measure if the drug is liquid; the
statement of the quantity of a drug which is in such unit form shall be in
terms of the numerical count of such units, supplemented, when necessary to
give accurate information as to the quantity of such drug in the package, by
such statement (in such terms, manner, and form as are not misleading) of the
weight or measure of such units, or of the quantity of each active ingredient
in each such unit, as will give such information.
(3) The statement of the quantity of a device
shall be expressed in terms of numerical count.
(f) A statement of weight shall be in terms
of the avoirdupois pound, ounce, and grain, or of the kilogram, gram, and
milligram. A statement of liquid measure shall be in terms of the United States
gallon of 231 cubic inches and quart, pint, fluid ounce, and fluid dram
subdivisions thereof, or of the liter, milliliter, or cubic centimeter, and
shall express the volume at 68° Fahrenheit (20° centigrade).
(g) Statements of the quantity of a drug
shall contain only such fractions as are generally used in expressing the
quantity of such drug. A common fraction shall be reduced to its lowest terms;
a decimal fraction shall not be carried out to more than three places, except
in the case of a statement of the quantity of an active ingredient in a unit of
a drug.
(h)
(1) Unless made in accordance with the
provisions of subparagraph (2) of this paragraph, a statement of the quantity
of a drug, in the terms of weight or measure applicable to such drug under the
provisions of paragraph (e) (2) of this section, shall express the number of
the largest unit specified in paragraph (f) of this section which is contained
in the package (for example, the statement of the label of a package which
contains one pint of a drug shall be "1 pint," and not "16 fluid ounces").
Where such number is a whole number and a fraction, there may be substituted
for the fraction its equivalent in smaller units, if any smaller is specified
in such paragraph (f) (for example, 1 1/4 pounds may be expressed as "1 pound 4
ounces"). The stated number of any unit which is smaller than the largest unit
(specified in such paragraph) contained in the package shall not equal or
exceed the number of such smaller units in the next larger unit so specified
(for example, instead of "1 quart 16 fluid ounces" the statement shall be "1
1/2 quarts" or "1 quart 1 pint").
(2) In the case of a drug with respect to
which there exists an established custom of stating the quantity of the
contents as a fraction of a unit, which unit is larger than the quantity
contained in the package, or as units smaller than the largest unit contained
therein, the statement may be made in accordance with such custom if it is
informative to consumers.
(i) The statement of the quantity of a drug
or device shall express the minimum quantity, or the average quantity, of the
contents of the packages. If the statement is not so qualified as to show
definitely that the quantity expressed is the minimum quantity, the statement,
except in the case of ampuls, shall be considered to express the average
quantity. The statement of the quantity of a drug in ampuls shall be considered
to express the minimum quantity.
(j) Where the statement expresses the minimum
quantity, no variation below the stated minimum shall be permitted except
variations below the stated weight or measure of a drug caused by ordinary and
customary exposure, after such drug is introduced into commerce, to conditions
which normally occur in good distribution practice and which unavoidably result
in decreased weight or measure. Variations above the stated minimum shall not
be unreasonably large. In the case of a liquid drug in ampuls the variation
above the stated measure shall comply with the excess volume prescribed by the
national formulary for filling of ampuls.
(k) Where the statement does not express the
minimum quantity:
(1) Variations from the
stated weight or measure of a drug shall be permitted when caused by ordinary
and customary exposure, after such drug is introduced into commerce, to
conditions which normally occur in good distribution practice and which
unavoidably result in change of weight or measure;
(2) Variations from the stated weight,
measure, or numerical count of a drug or device shall be permitted when caused
by unavoidable deviations in weighing, measuring, or counting the contents of
individual packages which occur in good packing practice. But under
subparagraph (2) of this paragraph variations shall not be permitted to such
extent that the average of the quantities in the packages comprising a shipment
or other delivery of the drug or device is below the quantity stated and no
unreasonable shortage in any package shall be permitted, even though overages
in other packages in the same shipment or delivery compensate for such
shortage.
(l) The
extent of variations from the stated quantity of the contents permissible under
paragraphs (j) and (k) of this regulation in the case of each shipment or under
delivery shall be determined by the facts in such case.
(m) A drug or device shall be exempt from
compliance with the requirements of clause (2) of
K.S.A. 65-669(b):
(1) The statement of the quantity of the
contents, as expressed in terms applicable to such drug or device under the
provisions of paragraph (e) (2) of this section, together with all other words,
statements, and information required by or under authority of the act to appear
on the label of such drug or device, cannot, because of insufficient label
space, be so placed on the label as to comply with the requirements of
K.S.A. 65-669(c) and regulations
promulgated thereunder, or
(2) The
quantity of the contents of the package, as expressed in terms of the numerical
count in compliance with paragraph (e) (2) or (3) of this section, is less than
six units, and such units can be easily counted without opening the package, or
(3) It is an ointment, is labeled
"sample" or "physician's sample," or with a substantially similar statement,
and the contents of the package do not weigh more than eight grams.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.