Kan. Admin. Regs. § 82-3-1007 - Identification signs

Current through Register Vol. 40, No. 39, September 30, 2021

(a) Identification signs required. Each operator shall identify each gas storage well and associated compressor site by posting a sign immediately adjacent to the wellhead or compressor site. The sign shall be durable and shall be large enough to be legible under normal daytime conditions at a distance of 50 feet. The sign shall include all of the following information:
(1) The name and license number of the operator;
(2) the name of the storage facility and the gas storage well number or compressor site name or number;
(3) the location of the gas storage well or compressor site by quarter section, section, township, range, and county; and
(4) the emergency contact phone number or numbers for the operator of the storage facility.
(b) Penalty. The failure to comply with the requirements of subsection (a) of this regulation shall be punishable by a $100 penalty per occurrence. Each day that a violation of this regulation continues may be considered a separate violation.

The penalties specified in this subsection may be increased by the commission if it finds that aggravating factors exist.

This regulation shall be effective on and after October 29, 2002.

Notes

Kan. Admin. Regs. § 82-3-1007
Authorized by and implementing K.S.A. 55-152, K.S.A. 2001 Supp. 55-1,115 and 74-623; effective, T-82-6-27-02, July 1, 2002; effective Oct. 29, 2002.

The following state regulations pages link to this page.



State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.