La. Admin. Code tit. 33, § III-919 - Emissions Inventory
Table 1 |
||
|
||
|
|
Adjoining Parishes to |
Ammonia (NH3) |
10 |
10 |
CO |
10 |
50 |
Lead (Pb) |
5 |
5 |
NOX |
100 |
100 |
PM10 or PM2.5 |
100 |
100 |
SO2 |
100 |
100 |
VOC |
100 |
100 |
Table 2 |
||
Lead (Pb) |
||
|
|
Adjoining Parishes to |
Ammonia (NH3) |
10 |
10 |
CO |
100 |
100 |
Lead (Pb) |
5 |
5 |
NOX |
100 |
100 |
PM10 or PM2.5 |
100 |
100 |
SO2 |
100 |
100 |
VOC |
100 |
100 |
Table 3 |
||
Nitrogen Dioxide (NO2) |
||
|
|
Adjoining Parishes to |
Ammonia (NH3) |
10 |
10 |
CO |
100 |
100 |
Lead (Pb) |
5 |
5 |
NOX |
10 |
50 |
PM10 or PM2.5 |
100 |
100 |
SO2 |
100 |
100 |
VOC |
100 |
100 |
Table 4 |
||
Ozone |
||
|
|
Adjoining Parishes to |
Ammonia (NH3) |
10 |
10 |
CO |
100 |
100 |
Lead (Pb) |
5 |
5 |
NOX |
25 |
100 |
PM10 or PM2.5 |
100 |
100 |
SO2 |
100 |
100 |
VOC |
10 |
50 |
Table 5 |
||
|
||
|
|
Adjoining Parishes to |
Ammonia (NH3) |
10 |
10 |
CO |
100 |
100 |
Lead (Pb) |
5 |
5 |
NOX |
10 |
50 |
PM10 or PM2.5 |
10 |
50 |
SO2 |
10 |
50 |
VOC |
10 |
50 |
Table 6 |
||
Sulfur Dioxide (SO2)
|
||
|
|
Adjoining Parishes to |
Ammonia (NH3) |
10 |
10 |
CO |
100 |
100 |
Lead (Pb) |
5 |
5 |
NOX |
100 |
100 |
PM10 or PM2.5 |
100 |
100 |
SO2 |
10 |
50 |
VOC |
100 |
100 |
Table 7 |
|
|
|
|
Threshold Value (tons/ |
Ammonia (NH3) |
10 |
CO |
100 |
Lead (Pb) |
5 |
NOX |
100 |
PM10 or PM2.5 |
100 |
SO2 |
100 |
VOC |
100 |
Actual
Agency Interest (AI)-any entity that is
being regulated or is of interest to the
Attainment Area-an area of the
Certified-the status of an emissions
inventory once the
Contiguous Facilities-facilities under common control separated by 0.25 miles or less.
Control Efficiency-the percentage by which
a control system or technique reduces the emissions from a
Control System-a combination of one or more
capture system(s) and control device(s) working in concert to reduce discharges
of pollutants to the
Emissions Factor-the ratio relating
emissions of a specific
NOTE: A
Flash Gas
Fugitive
Mobile
National
Nonpoint
Ozone Season-except as provided in LAC
33:III.2202, the period from May 1 to September 30, inclusively, of each
Process-an operation or function by a
Reporting Period-the time frame during the
reporting
Reporting
Routine Operations-operations, not
including any
Supporting Information for Emissions Inventory |
||
Data Element |
Description |
Status |
I. Inventory Information - Information describing the inventory being submitted. |
||
Reporting |
The calendar |
Required |
Inventory Type |
The type of pollutants for which the inventory will contain |
Required |
Reporting Period Start Date |
The first day of the reporting period |
Required |
Reporting Period End Date |
The last day of the reporting period |
Required |
II. |
||
|
Unique ID assigned by the |
Required |
|
|
Required |
|
Name of |
Required |
|
Mailing address of |
Required |
|
City of mailing address of |
Required |
|
|
Required |
|
Zip code of mailing address of the |
Required |
|
Phone number of the |
Required |
|
Name of |
Optional |
|
Description of business conducted at |
Required |
|
Operating status of the |
Required |
Address |
Address of |
Required |
City |
City of |
Required |
Parish |
Parish of |
Required |
|
|
Required |
Zip Code |
Zip code of |
Required |
Longitude (decimal degrees) |
Longitude of |
Optional |
Latitude (decimal degrees) |
Latitude of |
Optional |
UTM Easting (meters) |
UTM easting of |
Required |
UTM Northing (meters) |
UTM northing of |
Required |
UTM Zone |
Universal Transverse Mercator zone of |
Required |
Datum |
Code that represents the reference datum used to determine the location coordinates |
Required |
Primary SIC Code |
Standard Industrial Classification (SIC) code for
the entire |
Required |
Primary NAICS Code |
North American Industrial Classification System
(NAICS) code for the entire |
Required |
ORIS Code |
Four digit number assigned by the Energy Information
Agency (EIA) at the U.S. |
Optional |
Comments |
Miscellaneous information |
Optional |
III. Contact Information - Information describing
the contact |
||
Contact Type |
Emissions inventory (EI) |
Required - Both EI billing party and EI |
Name |
First and last name of contact |
Required |
Title |
Contact |
Required |
Company |
Name of company that employs the contact |
Required |
Address |
Contact |
Required |
City |
Contact |
Required |
|
Contact |
Required |
Zip Code |
Contact |
Required |
|
Email address of contact |
Required |
Phone |
Phone number of contact |
Required |
IV. |
||
|
Unique identification assigned to the |
Required |
NEDS ID |
The National Emissions Data System (NEDS) point
identification for the |
Optional |
Subject Item ID |
Subject item identification assigned by the
|
Required |
|
Description of |
Required |
|
The type of equipment or unit that generates the emissions. Examples include heaters, boilers, flares, storage tanks, cooling towers, fugitive emissions, and spills. |
Required |
|
The number under which the |
Required, where applicable |
EIQ Number |
|
Required, where applicable |
Status |
Operating status of the |
Required |
Permanent |
Date |
Required if status is "permanently |
SIC Code |
Standard Industrial Classification (SIC) code for
the |
Required |
NAICS Code |
North American Industry Classification System
(NAICS) code for the |
Optional |
Comments |
Miscellaneous information |
Optional |
Maximum Design Rate (MM BTU/hour) |
Maximum design |
Optional |
Firing Type |
Describes the burner type for boilers: front, opposed, tangential, internal, or other |
Optional |
Serial Number |
Serial number of equipment, if available |
Optional |
|
Date |
Optional |
Initial |
Date |
Optional |
Maximum Nameplate Capacity (megawatts) |
For electrical generators powered by |
Optional |
Engine Rating (horsepower) |
Power rating in horsepower (HP) for engines |
Optional |
V. Process Information - Information describing the
operation or function by a |
||
Process ID |
Unique identification for the process assigned by
the |
Required |
|
|
Required |
Process Description |
Description of the |
Required |
Status |
Operating status of the process during the reporting period |
Optional |
Permanent |
Date process was permanently taken out of service/no longer operating |
Required, if Status is "permanently |
Confidentiality |
Flag indicating whether or not a declaration of
confidentiality has been requested and granted by the |
Optional |
SCC |
|
Required |
Material Name |
Name of primary material used or produced by this process (the material on which the emissions calculations are based) |
Required |
Average Annual Throughput |
Average annual throughput of material for the process |
Required |
Annual Throughput Units |
Unit of measure for average annual throughput |
Required |
Average Ozone Season Throughput |
Average daily throughput of material for the process during the ozone season |
Required for facilities in ozone nonattainment areas |
Ozone Season Throughput Units |
Unit of measure for average ozone season throughput |
Required for facilities in ozone nonattainment areas |
Annual Average Ash Content |
For solid fuels, the concentration of ash produced by the fuel, expressed as a percentage of total fuel weight averaged over the reporting period for the process |
Required |
Ozone Season Average Ash Content |
For solid fuels, the concentration of ash produced by the fuel, expressed as a percentage of total fuel weight averaged over the emissions inventory ozone season for the process |
Optional |
Annual Average Sulfur Content |
The concentration of sulfur in the fuel, expressed as a percentage of fuel weight averaged over the reporting period for the process |
Required |
Ozone Season Average Sulfur Content |
The concentration of sulfur in the fuel, expressed as a percentage of fuel weight averaged over the emissions inventory ozone season for the process |
Optional |
Annual Average Heat Content |
Total annual |
Required |
Annual Average Heat Content Units |
Unit of measure for annual average heat content |
Required |
Ozone Season Average Heat Content |
Total |
Required for facilities in ozone nonattainment areas |
Ozone Season Average Heat Content Units |
Unit of measure for ozone season average heat content |
Required for facilities in ozone nonattainment areas |
Spring Throughput |
Seasonal operating percentage-the percentage of total annual throughput that occurs during the spring season, March through May |
Required |
Summer Throughput |
Seasonal operating percentage-the percentage of total annual throughput that occurs during the summer season, June through August |
Required |
Fall Throughput |
Seasonal operating percentage-the percentage of total annual throughput that occurs during the fall season, September through November |
Required |
Winter Throughput |
Seasonal operating percentage-the percentage of
total annual throughput that occurs during the winter season, January,
February, and December of the same calendar |
Required |
Average Hours per Day |
The actual number of hours per day for which the process is in operation |
Required |
Average Days per |
The actual number of days per |
Required |
Total Weeks |
The actual number of weeks per |
Required |
VI. |
||
Process ID |
|
Required |
|
|
Required |
|
|
Required |
Emissions Units |
The numerator unit for the |
Required |
Material or |
Material name for |
Required |
Material or |
The denominator unit for the |
Required |
|
|
Required |
VII. Control System Information - Information
describing the system where control measures are applied at or to a |
||
Control System ID |
Unique identification assigned to the control system
by the |
Required |
Subject Item ID |
Subject item identification assigned by the
|
Required |
Control System Description |
Description of the |
Required |
Status |
Operating status of the |
Optional |
Primary Device Type |
Type of primary control device (e.g., flare, scrubber, condenser, and vapor recovery unit) |
Required |
Secondary Device Type |
Secondary control device in series, not intended for backup or alternate control devices. Required if the control system has more than one control device in series. |
Required, where applicable |
VIII. Control Efficiency - Information describing
the percentage by which a control system or technique reduces the emissions
from a |
||
Control System ID |
Unique identification assigned to the control system
by the |
Required |
|
|
Required |
Primary Device Efficiency |
|
Optional |
Secondary Device Efficiency |
|
Optional |
Total Efficiency |
Net |
Required |
IX. |
||
|
Unique identification assigned to the |
Required |
Subject Item ID |
Subject item identification assigned by the
|
Required |
|
Description of emissions |
Required |
|
|
Required |
Status |
Operating status of the |
Optional |
Permanent |
Date |
Required, if Status is "permanently |
Height (feet) |
Physical height of |
Required |
Diameter (feet) |
Diameter of the |
Required |
Width (feet) |
Width of area for area |
Required for fugitive and area |
Length (feet) |
Length of area for area |
Required for fugitive and area |
Orientation (degrees) |
Orientation (bearing) of long axis of area |
Required |
Flow Rate (feet^3/second) |
Exit gas flow rate (actual cubic feet per second) |
Required |
Velocity (feet/second) |
Exit gas velocity |
Required |
Temperature (degrees Fahrenheit) |
Exit gas temperature at |
Required |
Moisture Content (%) |
Moisture content of exit gas stream, designated as a percentage |
Optional |
Longitude (decimal degrees) |
Longitude of |
Optional |
Latitude (decimal degrees) |
Latitude of |
Optional |
UTM Easting (meters) |
Universal Transverse Mercator easting of |
Required |
UTM Northing (meters) |
Universal Transverse Mercator northing of |
Required |
UTM Zone |
Universal Transverse Mercator zone of |
Required |
Datum |
Code that represents the reference datum used to determine the location coordinates |
Required |
Accuracy (meters) |
Measure of accuracy of the |
Required |
Horizontal Collection Method |
Method used to measure or estimate the |
Required |
X. Portable |
||
Location ID |
Unique identification assigned by |
Required |
|
|
Required |
Start Date |
Date the |
Required |
End Date |
Date the |
Required |
Parish |
Parish containing this location |
Required |
Longitude (decimal degrees) |
Longitude of |
Optional |
Latitude (decimal degrees) |
Latitude of |
Optional |
UTM Easting (meters) |
Universal Transverse Mercator easting of |
Required |
UTM Northing (meters) |
Universal Transverse Mercator northing of |
Required |
UTM Zone |
Universal Transverse Mercator zone of |
Required |
Datum |
Code that represents the reference datum used to determine the location coordinates |
Required |
Accuracy (meters) |
Measure of accuracy of the location's |
Required |
Horizontal Collection Method |
Method used to measure or estimate the location's
|
Required |
XI. Emissions Record - Information describing the
emissions for a specified combination of process ( |
||
|
|
Required |
Process ID |
|
Required |
Control System ID |
|
Optional |
|
|
Required |
Location ID |
|
Optional |
|
Routine, [NOTE: Separate |
Required |
|
|
Required |
Total Emissions |
Total emissions of specified |
Required |
Emissions Units |
Unit of measure for total emissions (tons or pounds) |
Required |
Estimation Method |
The method used to calculate or estimate emissions (AP-42, mass balance, etc.) |
Required |
Ozone Season Emissions (pound/day) |
Ozone season average daily emissions of specified
|
Required for facilities in ozone nonattainment areas |
Ozone Season Estimation Method |
A code indicating the method used to calculate or estimate emissions (AP-42, mass balance, etc.) |
Required for facilities in ozone nonattainment areas |
Number of Start-ups |
Number of |
Optional |
Number of Shutdowns |
Number of |
Optional |
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.