Md. Code Regs. 10.15.11.13 - Unit Processing Operations - Bottling Drinking Water

Current through Register Vol. 48, No. 26, December 17, 2021

The person-in-charge shall ensure that:

A. Finished product water meets the water quality standards set forth in Regulation .06 of this chapter;
B. Containers used in bottling are:
(1) Made of food-grade materials;
(2) Clean and sanitary when filled with finished product water; and
(3) Properly sealed to prevent the contamination of the water after bottling;
C. Caps and closures are:
(1) Made of food-grade materials;
(2) Clean and sanitary when used; and
(3) Properly sealed onto containers to prevent the contamination of the water after bottling;
D. Water is bottled in a room that meets the standards set forth in Regulation .07E of this chapter; and
E. During bottling, access into the bottling room is limited to persons needed for the bottling process.

Notes

Md. Code Regs. 10.15.11.13

The following state regulations pages link to this page.



State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.