Md. Code Regs. 11.14.04.20 - Floor and Trunk Pans
A. Floor and trunk pans shall be inspected for holes or rusted and weakened conditions.
Procedures: | Reject Vehicle If: |
(1) Inspect floor pan in occupant compartment (cab) or in cargo areas open to the occupant compartment for rusted out areas or holes which could |
(1) Floor pan (or floor) is cracked, has holes or is rusted through or weakened to cause a |
(2) Inspect trunk pans for rusted out areas, holes, or openings which would |
(2) Trunk pans are rusted out, contain holes or openings. |
(3) Inspect floor covering for presence, adhesion, hazardous conditions, and sealing (applicable to school vehicles only). | (3) Floor covering of school vehicle is missing, cracked, curled, or worn; not properly sealed or attached; or presents a tripping |
(4) Inspect engine cover on COE and COF vehicles for rusted-out areas or holes which could |
(4) Engine cover is not properly sealed or has rusted-out areas or holes which could |
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.