310 CMR, § 80.41 - Requirements for Change-in-product
(1)
Owners and Operators shall comply with all requirements in 310 CMR
80.41.
(2) A UST system once used
for non-food grade regulated substances shall not be reused to store food
products or drinking water.
(3) The
Owner shall notify the Department, in a format specified by the Department, of
a change-in-product in accordance with
310 CMR
80.23(2)(a) and the
following timeframes:
(a) If the
change-in-product is from a regulated substance to a different regulated
substance, within 30 days of executing the change; except if the different
regulated substance contains greater than 10% ethanol or greater than 20%
biofuel, then at least 30 days prior to executing the change, in accordance
with
310 CMR
80.30(3).
(b) If the change-in-product is from a
regulated substance to a non-regulated substance, prior to executing the
change.
(c) If the
change-in-product is from a non-regulated substance to a regulated substance,
within 30 days of receiving regulated substance into the UST system, in
accordance with
310 CMR
80.23(1).
(4) If the change-in-product is
from a regulated substance to a non-regulated substance:
(a) Before executing a change-in-product, the
Owner or Operator shall remove all solid and liquid material in accordance with
310 CMR
80.47. The Owner or Operator shall manage the
solid and liquid material removed from the UST system in accordance with all
applicable federal, state and local laws and regulations.
(b) The UST system will no longer be subject
to
310 CMR 80.00, except that
the Owner and Operator shall continue to be responsible for remediating any
releases of regulated substances that occurred. The Owner or Operator shall
conduct an assessment in accordance with
310 CMR
80.43(4), after notifying
the Department of the change-in-product, but before the change-in-product is
executed.
(c) Records of the
change-in-product shall be kept in accordance with
310 CMR
80.36.
(5) If the change-in-product is from a
regulated substance to another regulated substance, before executing the
change-in-product, the Owner or Operator shall empty the tank. The Owner or
Operator shall manage and dispose of the solid and liquid material removed from
the UST system in accordance with all applicable federal, state and local laws
and regulations.
(6) Owners or
Operators shall demonstrate compliance with the requirements for
change-in-product by maintaining records/documentation, in accordance with
310 CMR
80.36.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.