314 CMR, § 8.06 - Standards for All Other RCRA Facilities
(1)
Applicability. These standards apply to owners and
operators of RCRA facilities except those subject to interim status standards
under
314 CMR
8.04 and except those facilities which are
wastewater treatment units subject to the standards of
314
CMR 8.05.
(2) All owners and operators of RCRA
facilities subject to 314 CMR 8.06 shall comply with:
(a) The management standards of
310 CMR
30.500: Management Standards for All
Hazardous Waste Facilities, including: general waste analysis;
security; general inspection; personnel training; contingency plan; emergency
procedures, preparedness and prevention; recordkeeping and reporting; general
requirements for ignitable, reactive, or incompatible wastes; closure; and,
where applicable, post-closure.
(b)
The technical standards of
310 CMR
30.600: Technical Standards for All
Hazardous Waste Facilities, including general requirements for all
facilities; preparation of waste for disposal; injection wells, leaching
fields, and seepage pits; and, if applicable, the standards for surface
impoundments, landfills, waste piles, land treatment, ground water protection,
use and management of containers, and storage and treatment in tanks.
(c) The location standards of
310 CMR
30.700: Facility Location
Standards.
(d) The
financial responsibility requirements of
310
CMR 30.900: Financial Responsibility
Requirements for Treatment, Storage, and Disposal
Facilities.
(3) Any references to a license shall be
interpreted to mean a permit issued under
314 CMR 3.00: Surface
Water Discharge Permit Program, 5.00: Groundwater Discharge
Permit Program, or 7.00: Sewer System Extension and Connection
Permit Program.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.